Saw Machinery Service Ltd

06/01/2025

02/12/2024

It's always good fun using a scissor lift to do a job! Water had leaked into this extraction system affecting its performance. Now it's as good as new. LEV testing and having a suitable extraction system is hot on current HSE inspections. We can help with routine maintenance and carry out LEV testing for your records. Send us your enquiry today https://sawmachineryservice.co.uk/service-repair

26/11/2024

We were called out to a which had a problem with the scorer snagging on the laminate even after being re-sharpened. The chip channel in the machine was full of debris so it was damaging the scorer as it ran. An easy fix and another happy customer. See how we can help keep your workshop running smoothly on our website https://sawmachineryservice.co.uk/service-repair

11/11/2024

This build up of saw dust was the cause of this F45 not working properly. The air flow around the motors affected the performance - also a fire hazard. Now this is up and running perfectly. Contact us if you have similar issues with any of your https://sawmachineryservice.co.uk/service-repair

09/09/2024

🚨 We're Hiring! 🚨
Are you a passionate Field Service Engineer looking for a new opportunity? Join our growing team at Saw Machinery & Service Ltd in the Southampton/Eastleigh area. If you’re dedicated to providing exceptional service and have a knack for working with top-tier machinery, we want to hear from you!

Apply today and become part of a company that values expertise and innovation.

📍 Location: Southampton/Eastleigh, UK
🔧 Role: Field Service Engineer

12/08/2024

Sawdust build up is a fire hazard and a potential home for rats and mice if the machine isn't use frequently. Luckily, no small floofs 🐭were present here!
See more about our services here https://sawmachineryservice.co.uk/service-repair and why maintaining all machinery is as important as a vehicle service.

06/08/2024

This was a big job to an BS300. Our engineer replaced the bearings, rebuilt the gearbox and changed the oil. The oil hadn't been checked or changed for a couple of years so the worm drive had started to break down.
Did you know that we remove the waste oil and dispose of it for you? One less thing for a busy workshop to remember!

29/07/2024

Poor extraction meant that plastic debris collected at the bottom of this bandsaw so the wheel had become embedded with shavings. The customer contacted us because the blade kept losing its tracking and we discovered this was the cause. After a thorough clean and PUWER inspection, the machine is working perfectly😃
Visit our new website to see what else we can offer besides machine servicing
https://sawmachineryservice.co.uk

23/07/2024

The mighty Kundig wide belt sander! After a bit of a clean up this machine was fully serviced, had parts lubricated and the bed tensioned. Another PUWER compliant machine for our customer's busy workshop.
See more about our servicing here https://sawmachineryservice.co.uk/service-repair

15/07/2024

Debris build up causes poor air circulation around motors meaning they are more likely to overheat and break down. Metal swarf can also have coolant residue which overtime can stick parts together. This Altendorf F45 had a good clean up, thorough service and is now safe PUWER certified.
Contact us about your next service https://sawmachineryservice.co.uk/service-repair