What are the opening hours?

Monday 8am - 6pm Tuesday 8am - 6pm Wednesday 8am - 6pm Thursday 8am - 6pm Friday 8am - 6pm Saturday 8am - 6pm Sunday 8am - 1:30pm

Roman Concrete

Name: Roman Concrete
Address: Gravesend, DA124JS, GB
Telephone: +441474745054
Price range: Not applicable

Home
United Kingdom
Gravesend
Roman Concrete

Based in Medway, Kent. Roman Concrete is an independent Family run and managed business offering a personal but professional approach to your concrete needs.

Roman Concrete supplies ready mixed concrete via drum mixers or volumetric mixers to both commercial and domestic customers throughout North Kent. As a family run business, we take great pride in our reputation, and work hard to ensure that the service and concrete we offer always meets the very highest of standards. The ability to be flexible with the mix design is one of the main benefits of our

volumetric mixer trucks, having the ingredients mixed onsite reduces the risk of them setting before you’ve laid the concrete, ensuring you always get a fresh mix. The mix can be produced to suit your requirement on site, and altered accordingly due to changes in construction plans, application or weather conditions. Volumetric concrete offers the advantage of only paying for what you need, as the exact amount will be mixed directly at your site. This not only gives you the flexibility to alter the mix as you go, it also means you will never over or under order again.

02/09/2026

Know your delivery: drum mix vs on-site mix

Ordering concrete and not sure which delivery method suits your job? Here's the difference, straight up.

Drum mixers arrive pre-batched and ready to pour, full 8m3 loads only, and the mix can't be changed once it's made. Great for commercial jobs with fast discharge needs and someone on-site who knows their exact quantities.

Volumetric mixers do it differently. Concrete gets mixed on-site to the exact amount you need, so there's no waste and no overordering. The operator can stop and start, or adjust the mix if weather or plans change halfway through.

Not sure your job fits neatly into one or the other? We often combine both, say two drum loads for the bulk of an 18-19m3 pour, then a volumetric top-up for the last few m3 to get it spot on.

Which method sounds right for your next pour, drum, volumetric, or a bit of both?

https://www.romanconcrete.co.uk

31/08/2026

Bridges and culverts need concrete that won't quit

Bridge abutments and culverts don't get second chances. Once that concrete's poured and the ground's backfilled, you're relying on it for decades of load-bearing work, so the mix matters more than most jobs on site.

For this kind of civil work, we're generally looking at C40, our 40 Newton strength mix. It's the same grade we use for structural beams, footings, and foundations, built to handle serious load and constant stress without cracking under pressure.

Timing matters just as much as strength here. On culvert jobs especially, you often need concrete on site fast and ready to discharge the moment the vehicle arrives, which is exactly what our pre-mixed drum delivery is built for.

Got a bridge, culvert, or drainage project coming up in North Kent? Give us a ring and we'll talk through the mix design that fits your spec.

https://www.romanconcrete.co.uk

27/08/2026

Pouring Concrete in Wet Conditions: Kent Builders Read This 🏗️

August in Kent doesn't always mean dry skies, and if you're mid-project with a pour scheduled, wet weather can cause real headaches if you're not prepared. Wet concrete already makes surfaces slippery and significantly increases your slip, trip, and burn risks — add rainfall into the mix and those risks go up considerably.

A few things worth keeping front of mind before your next pour: always ensure your team has the right PPE in place (protective overalls, safety boots or wellies, gloves, and glasses as a minimum), make sure your exclusion zone around any pump or auger is clearly marked, and consider whether a retarder admixture could give you extra working time if conditions slow your crew down. If waterproofing is a concern for your specific project, our waterproof mixes are worth asking about too. Roman Concrete's volumetric mixers mean you only pay for the concrete you actually use, which takes one pressure point off your plate when the weather isn't playing ball. Have you ever had a pour go sideways because of unexpected weather? What's your go-to contingency when conditions change on site? 💬

https://www.romanconcrete.co.uk

25/08/2026

Kerb & Channel Bedding: Are You Using the Right Mix?

Getting a road kerb or channel installation wrong from the base up is an expensive mistake, and the concrete bedding mix is where it all starts. C7/8 (Gen 0) is the go-to choice for kerb bedding, haunching, and backing. It's a wet lean mix that gives you the workability needed to set kerbs accurately without overcomplicating the pour. For trench fill and kerbing where you need that step up in strength, ST mixes and C25 (25 Newton/28 day strength) are well suited and widely specified on highway and civil projects. If you're working in conditions where mix flexibility matters (weather changes, phased kerb runs, or tight access), volumetric delivery is worth considering. The mix is freshly batched on site, so it can be adjusted to suit your actual site conditions rather than locking you into a batched load you can't alter.

Roman Concrete supplies kerb bedding mixes across North Kent, including Gravesend, Dartford, Rochester, and Maidstone, with same and next day delivery available 7 days a week. 🏗️ Whether you're speccing a domestic dropped kerb or a full carriageway channel installation, it's worth a quick call to confirm the right mix before you order. What mix have you typically been using for kerb bedding on your projects? Drop a comment below or give us a call if you'd like a recommendation before your next delivery. 👇

https://www.romanconcrete.co.uk

21/08/2026

Why Concrete Cover to Rebar Is More Critical Than You Think

Getting the concrete cover to reinforcement steel wrong is one of the most common (and costly) mistakes on construction projects. Too little cover and moisture reaches the steel, causing it to rust and expand, which cracks the concrete from the inside out. Too much cover and you risk reducing the structural effectiveness of the reinforcement altogether. What's the right balance for your project?

The cover required depends heavily on the environment and the concrete grade being used. A C40 mix used for HGV yard foundations or septic tank bases has very different exposure requirements compared to a C25 used for general footings and trench fill. Getting the specification right from the pour itself is where Roman Concrete can make a real difference, whether that's a volumetric mix calibrated precisely on-site or a pre-mixed drum delivery for larger commercial work across North Kent. Have you ever had a project where incorrect rebar cover caused problems down the line? Drop a comment below. 👇

https://www.romanconcrete.co.uk

19/08/2026

Manhole Surround and Haunching: Are You Using the Right Mix? 🔧

Getting the concrete mix wrong on utility works isn't just a headache, it's a costly mistake that can compromise the structural integrity of the whole installation. For manhole surrounds and haunching, C7/8 (Gen 0) is typically the go-to mix as it's specifically suited for kerb bedding, haunching, backing, and infilling around manholes. It's workable enough to place accurately around tight utility structures while still delivering the support those areas need.

That said, the mix isn't a one-size-fits-all decision. If you're working in a waterlogged area or a site prone to ground movement, additives like waterproofing agents or plasticisers can make a real difference, reducing bleed, cracking, and shrinkage before the concrete sets. Roman Concrete's volumetric delivery means the mix can be adjusted on-site to suit your exact conditions, so if the weather turns or the job spec changes, you're not stuck with a batch that no longer fits. What type of utility work do you have coming up, and have you ever had to switch mix mid-job because of site conditions? Drop your experience in the comments below.

https://www.romanconcrete.co.uk

17/08/2026

What Is Blinding Concrete (And Do You Actually Need It)?

Most people ordering concrete for a project know exactly what they want the final result to look like. But the layer that goes down first? That often gets overlooked. Blinding concrete is a thin layer of low-strength concrete laid directly onto prepared ground before any structural work begins. It creates a clean, level, firm surface to work from, protecting your foundations from contamination and giving you a stable base to set out reinforcement accurately.

For most blinding applications, C7/8 (Gen 0) or C10 concrete is the go-to choice. Gen 0 suits general domestic blinding, cavity filling, and drainage works, while C10 steps things up slightly for trench fill, pad foundations, and house floor blinding in non-aggressive ground conditions. Neither needs to carry heavy structural loads, so you are not paying for strength you do not need. 🏗️ If you are about to start a new build, lay footings, or tackle drainage works in North Kent, it is worth asking yourself: have you accounted for your blinding layer in your concrete order? And are you confident which mix is right for your ground conditions? Roman Concrete's team can help you get that right first time, with volumetric mixing meaning you only pay for exactly what gets poured.

https://www.romanconcrete.co.uk

13/08/2026

Does Your Concrete Actually Meet BSI Standards?

Most people ordering concrete focus on price and delivery time, which makes sense. But the strength grade you specify, and whether it's genuinely tested to BSI standards, can be the difference between a structure that lasts decades and one that causes serious problems down the line. Compressive strength is measured in Newtons per square metre at 28 days, and each mix grade exists for a reason. A C10/Gen 1 at 7 Newton is fine for agricultural strip work, but you wouldn't use it where you need a C25/ST2 at 25 Newton for reinforced foundations or trench fill. Matching the right grade to the right application isn't just good practice, it's essential.

At Roman Concrete, our ready-mix concrete is tested weekly in accordance with BSI standards, and our onsite volumetric mixers are regularly calibrated so what you order is exactly what gets poured. That matters especially if you're quoting from precise measurements, because our pricing works on what you actually use, not a rounded-up estimate. So what's your next project calling for? And have you ever been unsure which strength grade to specify? Drop your question below and we'll point you in the right direction. 🏗️

https://www.romanconcrete.co.uk

11/08/2026

How to Stop Large Concrete Slabs From Cracking

Large domestic slabs crack more often than people expect, and most of the time it comes down to the mix choice and what goes into it. Whether you're laying a patio, a driveway base, or a garage floor in North Kent, getting this right from the start saves you a costly redo down the line. So what actually makes the difference? 🏗️

Concrete fibres are one of the most effective ways to reduce cracking on larger pours. They increase water resistance and settle with a clean finish, making them a solid choice for domestic slabs. Screed fibres take it further, boosting strength and durability while cutting the chances of shrinking and bleeding. On the admixture side, a plasticiser softens the mix for better workability and also reduces bleed and cracking before the concrete sets. For most large domestic slabs, a C20/Gen 3 or C25/ST2 mix is a strong starting point, but the right call depends on your specific project. Roman Concrete's volumetric mixers mean you only pay for what's actually batched on site, so there's no pressure to rush the pour or over-order. What type of slab are you planning, and have you used fibre additives before? 💬

https://www.romanconcrete.co.uk

10/08/2026

🚧𝐉𝐨𝐛 𝐀𝐝𝐯𝐞𝐫𝐭𝐢𝐬𝐞𝐦𝐞𝐧𝐭: 𝐓𝐫𝐚𝐢𝐧𝐞𝐞 𝐂𝐨𝐧𝐜𝐫𝐞𝐭𝐞 𝐏𝐮𝐦𝐩 𝐎𝐩𝐞𝐫𝐚𝐭𝐨𝐫 👷

Location: Gravesend, Kent, DA12
Company: Aintree Concrete Pumping - Kent’s No. 1 Concrete Pump Hire Company.
Coverage Area: South East England.

💪𝐏𝐨𝐬𝐢𝐭𝐢𝐨𝐧 𝐎𝐯𝐞𝐫𝐯𝐢𝐞𝐰:
We are looking for a dedicated and physically fit individual to join our team as a Trainee Concrete Pump Operator. This role is perfect for those who are willing to work hard and are not afraid of getting their hands dirty.

⚙️𝐊𝐞𝐲 𝐑𝐞𝐬𝐩𝐨𝐧𝐬𝐢𝐛𝐢𝐥𝐢𝐭𝐢𝐞𝐬:

• Operate and maintain concrete pump machinery.

• Assist in clipping up, lifting, and moving pipes to facilitate concrete placement.

• Work on-site until the concrete is successfully poured.

🚛𝐑𝐞𝐪𝐮𝐢𝐫𝐞𝐦𝐞𝐧𝐭𝐬:

• Valid HGV/LGV Class 2 license.

• Physical fitness to perform demanding tasks in various weather conditions.

• Strong timekeeping skills and a good work ethic.

• Willingness to start early and occasionally finish late; start and finish times are variable based on job requirements.

• Mechanical knowledge / problem solving experience around HGV vehicles is a significant advantage in case of breakdowns.

• CSCS certification is a plus.

🪜𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬:

• Competitive pay rates once fully trained and certified with your operators ticket for concrete pumping.

• Opportunity to achieve an NVQ qualification.

🈸𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧 𝐏𝐫𝐨𝐜𝐞𝐬𝐬:
Interested candidates should send their CV to: [email protected].

Join us at Aintree Concrete Pumping and be part of a dynamic team dedicated to delivering quality service across South East England!

Address

Gravesend
DA124JS

Opening Hours

Monday	8am - 6pm
Tuesday	8am - 6pm
Wednesday	8am - 6pm
Thursday	8am - 6pm
Friday	8am - 6pm
Saturday	8am - 6pm
Sunday	8am - 1:30pm

Telephone

+441474745054

Website

http://www.romanconcrete.co.uk/

Alerts

Be the first to know and let us send you an email when Roman Concrete posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Roman Concrete:

Want your business to be the top-listed Engineering Company in Gravesend?