What are the opening hours?

Monday 8am - 5pm Tuesday 8am - 5pm Wednesday 8am - 5pm Thursday 8am - 5pm Friday 8am - 5pm

STOLZ

Innovative Engineering business offering Functional Safety and specialised Instrument and Control services. Located in the UK, supporting clients globally.

31/07/2026

Neal completed the Lifetime Fitness Impossible Mile last weekend in support of the fantastic Sunflower Children's Action Group.

It was a tough but enjoyable challenge, made even more worthwhile knowing it was helping to raise funds for such an important local charity that supports children and families across our community.

A big thank you to everyone who organised, took part, donated and cheered us on throughout the event.

I'm pleased that STOLZ Ltd was able to support the event as one of the sponsors.

Well done to everyone who completed the challenge!

My shins are still hurting!

09/06/2026

Are you an Operator or EPC that needs support with FAT and SAT?

FAT and SAT are where design assumptions get exposed.

Most issues found during FAT or SAT aren’t caused by hardware failures, they come from unclear specifications, unchallenged vendor logic, or late changes that never made it into the test scope.

At STOLZ, we support EPCs and operators with C&I and functional safety expertise for FAT and SAT activities, including preparation, ex*****on, and close-out.

The aim is simple:
Catch issues early, reduce site rework, and make sure systems perform as intended when it matters most, because onsite is the worst place to find design gaps!

🔧 STOLZ - Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide

04/06/2026

Are you an Operator or EPC that needs support with C&I tenders?

Unclear C&I and functional Safety specifications are one of the fastest ways to create risk, cost growth, and vendor misalignment.

At STOLZ, we help operators and EPCs develop clear, technically robust C&I and functional safety project specifications that align with operator standards, stand up to IEC 61511 scrutiny and reduce surprises at FAT and SAT.

If you want vendors pricing the same scope — and delivering what you expect — it starts with the specification

Get in touch for a Free Consultation 👇️

🔧 STOLZ - Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

02/06/2026

Are you an Operator or EPC that needs support with C&I Projects?

At STOLZ, we provide Experienced end-to-end Project Management services, tailored specifically for C&I environments, helping our clients deliver projects safely, on time, and on budget.

Our team has experience across:
✔️ Project leadership & planning
✔️ Cost control and schedule management
✔️ Contractor coordination & stakeholder management
✔️ Risk mitigation and change control
✔️ Quality, HSE, and compliance oversight

Whether you’re upgrading existing assets, delivering new installations, or managing multi-disciplinary scopes, STOLZ acts as your trusted owner’s representative, keeping projects moving and decisions informed.

If you’re planning a C&I project and want confidence from concept through completion, let’s talk.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com✉️ Email: [email protected]
📍 Based in the UK, supporting clients worldwide

&I

01/06/2026

STOLZ are proud to be the main sponsor for THE IMPOSSIBLE MILE charity event run by Lifetime Fitness in Grimsby, for the Sunflowers Children’s Action Group 🌻

All profits from the event go to the Sunflowers Children’s Action Group!

THE IMPOSSIBLE MILE 🏃‍♂️‍➡️
26TH JULY 2026 | KING GEORGE V STADIUM | 10AM
This isn’t just a race - This is a decision.

THE CHALLENGE
400m Burpee Broad Jumps
400m Walking Lunges
400m Bear Crawl
400m Run
One mile.
Four movements - No shortcuts.

You can take it on:
* SOLO 👱
* OR AS A DOUBLES TEAM 👩‍❤️‍👨

* Official chip timing 🕛️
* Elite Mile Finals
* Crowd challenges
* Kids involvement

DO YOU HAVE WHAT IT TAKES?
📍 King George V Stadium
📅 26th July 2026
⏰ First wave starts at 10AM

21/05/2026

Developing Robust Safety Requirements Specifications (SRS) for Functional Safety Compliance

The Safety Requirements Specification (SRS) defines how Safety Instrumented Functions must perform. A well-structured SRS provides the foundation for design, verification, testing, and lifecycle management.

STOLZ supports clients in developing clear and compliant SRS documents aligned with IEC 61511 functional safety requirements.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com
✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

19/05/2026

Developing Proof Test Procedures incorporating Device Safety Manual Requirements.

Proof testing is essential to ensure Safety Instrumented Functions continue to meet their required SIL performance.

Effective procedures must incorporate requirements from device safety manuals and functional safety standards such as IEC 61508 and IEC 61511 for the process industry.

STOLZ develops structured proof test procedures that support compliance, traceability, and effective testing in operation.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com
✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

14/05/2026

Simplifying SIL Verification Using Dedicated Calculation Software

SIL verification requires careful analysis of failure rates, test intervals, architecture, and diagnostics.

STOLZ uses dedicated SIL calculation software to efficiently perform reliability calculations and document results. This helps clients demonstrate compliance while ensuring safety systems are robust and correctly engineered.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com
✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

12/05/2026

Or***ce Plate Engineering: Design, Specification and Procurement

Or***ce plates remain one of the most widely used methods of flow measurement in industrial processes. Correct design and specification are essential to ensure accuracy, repeatability, and long-term performance.

STOLZ supports clients with or***ce plate design, specification, and procurement to ensure reliable flow measurement solutions.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com
✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

***cePlate

07/05/2026

Thermowell Engineering: Design, Specification and Procurement

Thermowell design plays a critical role in temperature measurement reliability and mechanical integrity.

Incorrect design can lead to vibration failures or inaccurate measurements.

STOLZ supports clients with thermowell design, specification, and procurement, ensuring compliance with recognised engineering standards and operational requirements.

🔧 Specialists in Functional Safety and Instrument & Control Engineering Solutions
🌐 Website: www.stolzltd.com
✉️ Email: [email protected]
📍 Based in the UK, supporting clients world wide.

Address

14 Town Hall Street
Great Grimsby
DN311HN

Opening Hours

Monday	8am - 5pm
Tuesday	8am - 5pm
Wednesday	8am - 5pm
Thursday	8am - 5pm
Friday	8am - 5pm

Website

http://www.stolzltd.com/

Alerts

Be the first to know and let us send you an email when STOLZ posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to STOLZ:

Want your business to be the top-listed Engineering Company in Great Grimsby?