MB Engineering and Vapour Blasting

Call Directions Website Contact the business

MB Engineering and Vapour Blasting MB Engineering and Vapour blasting based in Malvern, Worcestershire. Providing Vapour blasting servi Hot chemical wash £25/per wash. Vapour Blasting from £30/hr.

MOT welding £35/hr.

Busy couple of weeks it has been.Couple of gearboxes in for a spruce up before they are to be sold. This is where it a...
16/10/2026

Busy couple of weeks it has been.
Couple of gearboxes in for a spruce up before they are to be sold. This is where it all started. Fed up of painted aluminium when doing my own engine builds. Who knew it would lead to where I am today.
From modern Vtwin casings in for that rebuild refinishing.
To some nearly 100 year old *p V twin casing. Years of storage neglect being cleaned away. Ready for them to be checked over and repaired ready to live again.

Plus a little glimpse of some locks that have been blasted to highest finish before re plating.

Never same thing each week.Nice little T120 engine in for a clean and barrels recoated. Ready for rebuilding.Can you ...
26/09/2026

Never same thing each week.
Nice little T120 engine in for a clean and barrels recoated. Ready for rebuilding.

Can you radiators?
In the right hands yes. Breathing life and in to these bike rads.

Set of forks in for freshen up. Now off to suspension guys to get overhauled.

Finally what does the the ultrasonic look like after Tumble sonic cleaning of 25+kgs of nuts and bolts!

Something a bit different to look at instead of shiny items.So been making few brackets. One for a gearbox mount on ...
19/09/2026

Something a bit different to look at instead of shiny items.
So been making few brackets. One for a gearbox mount on car.
Second one to hold the cyclone separator for easier cleaning of the blasting cabinets.

Then few production items in for quick clean for regular customer.

Arcdroid earning its keep.Few brackets and plates cut out today.Set of plates for a orders of my bespoke karting trolley...
29/08/2026

Arcdroid earning its keep.
Few brackets and plates cut out today.
Set of plates for a orders of my bespoke karting trolleys.
Plus few plates for MSUK seat rail kits. Coming to a Avenger soon.

Watch this space for few little fab projects 👌

28/08/2026

So like body work and paint. Plating is the same. Its all in the preparation. Here you can see the difference in final finish.
One being our usual finish for the more factory OEM look. The other a shiny finish for that more polished look.
Yes there as still imperfections. Next level would be tumble polished prior to plating.

Always accommodating the customers needs.

Just a snippet of what's been through the workshop lately. Plus what I remembered to take pictures of 🤦!Seems to have be...
28/08/2026

Just a snippet of what's been through the workshop lately. Plus what I remembered to take pictures of 🤦!
Seems to have been a week of gear cleaning. Removing surface rust for a proper inspection of condition.
Did a whole box of mini gears too.

Few bits back from the platers. Top quality service as always.

Then a little modification on a inlet plenum. Shaving down the trumpet plate to get that all important under bonnet clearance. Then all blasted for that fresh look.

Well its been a flat out week!Nice little header tank thats been for a spruce up after modifications.Some BBS split rims...
31/07/2026

Well its been a flat out week!
Nice little header tank thats been for a spruce up after modifications.

Some BBS split rims in for a freshen up after being neglected. After trying different finishes the customer has settled on this for more OEM finish 👌 going to look trick once given a clear ceramic coating.

Last but not least the mammoth task of cleaning up 397 brass fittings after manufacture.

What a week! Despite the heat in the workshop still managed to get few jobs done and others progressed.Now CLOSED till M...
11/07/2026

What a week! Despite the heat in the workshop still managed to get few jobs done and others progressed.

Now CLOSED till Monday 20th of July for a well earned break! First time in 6 years!
Much need after this week.

Few more hours spent on making my life easier. Hardware of the control unit built. Made easier with the middle Isle at t...
27/06/2026

Few more hours spent on making my life easier. Hardware of the control unit built. Made easier with the middle Isle at the time pointless purchase. How dare she question my purchases 😂
Now to call in a favour and get programming sorted.
Just addition of solenoid valves to add to the cabinet along with multi nozzle head attachment.

Pictures don't do this one justice. But this old scabby super charger housing is going on to live another day.Something ...
26/06/2026

Pictures don't do this one justice. But this old scabby super charger housing is going on to live another day.
Something a little special, can't wait to see it finished 👌

Despite the heat and turning the machines off after midday for past two days. Still managed to run another 25kgs of nuts and bolts plus a load of bracketry for pur regular customer Malvern Electroplating.

Address

Unit 8 Howsell Road Industrial Estate
Malvern
WR141UJ

Opening Hours

Monday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm
Saturday 9am - 12:30pm

Telephone

+447760220205

Website

Alerts

Be the first to know and let us send you an email when MB Engineering and Vapour Blasting posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to MB Engineering and Vapour Blasting:

Shortcuts

Share

Category