Dacol Engineering

Dacol Engineering A Family Run Business Since 1977. With 48 Years of Precision & High Quality Machining experience.

England when it hits 34 degrees: “No one panic.” Everyone panics. 🌞 🥵 Let’s be honest — most of us in the UK are built f...
27/05/2026

England when it hits 34 degrees:
“No one panic.”
Everyone panics. 🌞 🥵

Let’s be honest — most of us in the UK are built for drizzle, not desert temperatures. Working in this kind of heat can make even the simplest tasks feel twice as hard, especially for people working on-site, in warehouses, outdoors, or travelling between jobs.

A few reminders while we’re all melting together this week:

🫗 Stay hydrated
🧢 Take regular breaks where possible
🪭 Keep workspaces ventilated
🌞 Don’t underestimate the heat — it affects focus and energy more than we think

Check in on your team and colleagues
Productivity matters, but people matter more.

And if all else fails... an iced coffee and standing directly in front of a fan counts as a business strategy this week.

How is everyone coping with the heat?

Another bank holiday weekend is nearly here... and if we’re honest, it can feel a little bit like a juggling act.A short...
20/05/2026

Another bank holiday weekend is nearly here... and if we’re honest, it can feel a little bit like a juggling act.

A shorter working week often means trying to squeeze five days of work into four, catching up on emails, deadlines, and schedules before and after the break. It’s easy to focus on the productivity side and see it as “losing” a day.
But there’s another side to it too…..

That extra day gives people time to reset, recharge, spend time with family and friends, and step away from the constant pace of work. And that matters.

Good mental health isn’t just about taking time off when things get difficult - it’s also about creating balance before we get to that point. Rest, downtime, and switching off are all part of performing at our best long term.
At the end of the day, it’s about balance.

Working hard is important, but so is taking the time to enjoy life outside of work too.

Wishing everyone a restful and enjoyable bank holiday weekend when it arrives. 🌞 😎

Mental health matters. And the truth is… every single one of us gets overwhelmed sometimes.Work can be demanding. Deadli...
18/05/2026

Mental health matters. And the truth is… every single one of us gets overwhelmed sometimes.

Work can be demanding. Deadlines build up, inboxes never stop, expectations feel high, and before you know it, stress starts creeping in.

The important thing to remember is that feeling overwhelmed doesn’t mean you’re failing. It means you’re human.

A few things that can really help when work starts to feel too much:
• Take a proper break away from your screen
• Prioritise what actually needs doing today
• Speak to someone instead of carrying it alone
• Get outside, even for 10 minutes
• Remember that not everything has to be perfect

We spend so much time looking after projects, clients, targets, and teams… but we also need to look after ourselves.

And sometimes the most productive thing you can do is pause, reset, and breathe.

Be kind to yourself and check in on the people around you too — you never know who might be struggling quietly. 🖤🖤

MentalHealthMatters

It's always rewarding to see new projects come to life - especially for long-standing customers who continue to place th...
15/05/2026

It's always rewarding to see new projects come to life - especially for long-standing customers who continue to place their trust in us

We're proud to share these newly manufactured components, recently completed by the team here at Dacol.

From initial discussions through to finished parts, it's been a great project to be involved in, and we're extremely pleased with how the final products have turned out.

Working on new parts always brings exciting challenges and opportunities for our team, and it's something we genuinely enjoy.

Whether it's refining processes, achieving tight tolerances, or ensuring the highest quality finish, every stage is approached with care and precision.

What makes projects like this even more rewarding is the continued partnership behind them. Building long-term relationships with our customers is something we value hugely, and we're grateful for the ongoing confidence they place in our team and capabilities.

A big well done to everyone involved in bringing these parts to completion


We always knew we had talent in the Dacol office..... but we didnt expect music video fame 🎸 🎬 One of our team (Keeley) ...
15/05/2026

We always knew we had talent in the Dacol office..... but we didnt expect music video fame 🎸 🎬

One of our team (Keeley) had the chance to appear in the brand new music video from The Reytons for their latest track Buskers Paradise - and after weeks of keeping it secret, we can finally share the news!!

For any indie rock fans out there, you’ll know how huge this is. A proper dream come true and an unforgettable experience to be part of.

The video is out now, and safe to say were all a little bit star struck in the office 👀

Who knew the Dacol team could add ‘music video star’ to the CV.

Please go watch Buskers Paradise by The Reytons.

We always knew we had talent in the Dacol office..... but we didnt expect music video fame 🎸 🎬 One of our team (Keeley) ...
08/05/2026

We always knew we had talent in the Dacol office..... but we didnt expect music video fame 🎸 🎬

One of our team (Keeley) had the chance to appear in the brand new music video from The Reytons for their latest track Buskers Paradise - and after weeks of keeping it secret, we can finally share the news!!

For any indie rock fans out there, you'll know how huge this is. A proper dream come true and an unforgettable experience to be part of.

The video is out now, and safe to say were all a little bit star struck in the office 👀

Who knew the Dacol team could add 'music video star' to the CV.

Please go watch Buskers Paradise by The Reytons.

Hope everyone had a great bank holiday weekend 🌞 Were back at it this week at Dacol - refreshed, recharged, and ready to...
06/05/2026

Hope everyone had a great bank holiday weekend 🌞

Were back at it this week at Dacol - refreshed, recharged, and ready to go again.

A bit of fresh air, a reset, and now its full focus on delivering the quality and precision our customers rely on.

Here’s to a productive week ahead 👊

Not every project needs thousands of units to make an impact.At Dacol, we specialise in small to medium batch work — the...
24/04/2026

Not every project needs thousands of units to make an impact.

At Dacol, we specialise in small to medium batch work — the kind that requires flexibility, attention to detail, and a team that genuinely cares about getting it right. It’s an area not many companies focus on, but it’s where we thrive.

We’re really proud of this latest batch produced for one of our customers. Every piece reflects the same level of quality and precision we bring to all our work, no matter the volume.

Whether it’s a short run, a bespoke requirement, or something a little out of the ordinary, we’re set up to deliver — without compromising on standards.

If you’re looking for a partner who can handle smaller batch production with the same care as large-scale manufacturing, let’s have a chat.

Great to catch up with David from Raynor Tool Services today 👏 Raynor supports us with precision CNC regrinding of our c...
22/04/2026

Great to catch up with David from Raynor Tool Services today 👏

Raynor supports us with precision CNC regrinding of our carbide drills, helping us maintain performance while getting more out of our tooling.

We’ve just had another batch back, and the quality speaks for itself - accurate, consistent, and ready to go back into production.

Its always a win working with suppliers who really understand the demands of the industry and help keep everything running smoothly.

This week, we’re putting the spotlight on Darren - a true cornerstone of Dacol.Darren joined he business in July 1986 an...
20/04/2026

This week, we’re putting the spotlight on Darren - a true cornerstone of Dacol.

Darren joined he business in July 1986 and has been with us ever since. He’ll tell you himself he came to us straight from school..... but nipped home for his tea first! Over the years, that sense of humour has become just as well known as his work.

Often referred to as ‘Dacol Darren’ he takes real pride in the company and what we stand for - even joking that if you cut him in half, it would read Dacol all the way through.

With decades of hands on experience, Darren is highly skilled in both milling and turning, with a particular passion for milling. As a CNC programmer and operator, his expertise and attention to detail help ensure we consistently deliver quality for our customers.

Darren isn’t just part of the team - he’s part of the foundations that Dacol has been built on. Darren’s loyalty over the years have played a huge part in shaping who we are today, and it certainly doesn’t go unnoticed.

Were incredibly grateful for everything you’ve contributed Darren - its genuinely appreciated. 👏 👏 👏

Address

Old Mill Lane Ind Est
Mansfield
NG199BG

Opening Hours

Monday 7am - 3:30pm
Tuesday 7am - 3:30pm
Wednesday 7am - 3:30pm
Thursday 7am - 3:30pm
Friday 7am - 2am

Website

Alerts

Be the first to know and let us send you an email when Dacol Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category