AG Site Testing

Directions Website Contact the business

AG Site Testing Site Testing Services within the Built and Natural Environment

09/10/2026

Fully loaded, on the cores 👌🍑

25/09/2026

Plates!

24/09/2026

📍 RETFORD

AG SITE TESTING were chosen by a valued client to carry out testing as part of the validation works on a cement modified road construction.

Methods included plate bearing testing and the recovery of concrete cores to determine strength characteristics.

In situ results proved excellent, with an equivalent pressure of around 700kPa applied with less than 0.25mm of deformation 💥.



12 months ago! 🤯Schmidt Hammer testing of 4 wing walls for the estimated cube compressive strength. The schmidt Hammer h...
11/09/2026

12 months ago! 🤯

Schmidt Hammer testing of 4 wing walls for the estimated cube compressive strength.

The schmidt Hammer had it's work cut out with nearly 3,000 hammer blows carried out 🥵

04/09/2026

Cooking on gas with the drill rig 🔥

📍Alnwick

Recovery of road cores and determination of road construction ✅🪏🥵.

📍Scottish BordersEarly run up to the Scottish borders today, barely any traffic in sight 😍. As part of the design, plate...
06/08/2026

📍Scottish Borders

Early run up to the Scottish borders today, barely any traffic in sight 😍.

As part of the design, plate load testing was required for the proposed construction of a large storage silo. Different diameter plates used and quite substantial loadings of up to 650kPa required, 22t machine lifting ✅.

More jobs further north please 😁👌.

📍GargraveA few from today, with the road and plots of a new residential development all plate tested.Results = SOLID 🪨 (...
04/08/2026

📍Gargrave

A few from today, with the road and plots of a new residential development all plate tested.

Results = SOLID 🪨 (that's the technical value 😁)

For any load testing requirements such as for crane pads, piling mats, scaffolding mats or traditional CBR tests please do not hesitate to get in touch! 🤝


Assisting Shadbolt Group with load testing for a large silo on a local site.Plate bearing testing is a relatively quick ...
29/06/2026

Assisting Shadbolt Group with load testing for a large silo on a local site.

Plate bearing testing is a relatively quick method to determine material strength characteristics and is still often the preferred in-situ test throughout earthworks and construction l.

Fundamental for gaining an understanding material behaviour under load and typically used for the design of piling mats, crane pads and for baseline foundation assesments.

Van stickered up and ready for work...if you see it on the road give it a beep 👍.From CBR's and Sulphate Investigations ...
25/06/2026

Van stickered up and ready for work...if you see it on the road give it a beep 👍.

From CBR's and Sulphate Investigations to Wet Diamond Drilling.

Not just testing...setting out at cutting of concrete by wet diamond drilling for the installation of stainless steel fl...
06/06/2026

Not just testing...setting out at cutting of concrete by wet diamond drilling for the installation of stainless steel flat top bollards.

In house apparatus to carry out a variety of concrete cutting whether it's for coal tar analysis, compressive strength or installation of street furniture ✅.

Address

Newcastle Upon Tyne

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when AG Site Testing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to AG Site Testing:

Shortcuts

Share

Category