15/11/2026
What the coatings were hiding.
Last year we surveyed a steel narrowboat out of the water. Beneath tired coatings we found pitting along the hull sides, and we recommended that the hull be blasted back to bare steel so it could be properly assessed.
This week we went back. The owner had followed that advice, and the steel told its full story.
Our first pass found 60 to 70 pits that needed welding. The closer we looked, the more we found. By the end of the inspection we had marked around 500 on the hull sides, most of them along the waterline on one side, with more on the baseplate.
Surveyors call this pit blindness. Light, angle and the shape of a pit can hide it in plain sight, and every fresh look reveals more. It is why we never treat a pit count as final, and why we tell owners to budget for what the welder will find once the work begins.
The good news is that the plate thickness itself remains sound. With careful welding, new anodes, a proper epoxy coating system and a galvanic isolator, she has many good years ahead of her, and she will be lifted again in two years so we can see how the repairs are holding.
If your boat has not been out of the water for a while, what is happening below the waterline is worth knowing about before it becomes expensive.