Essex Unvented

07/11/2024

12/04/2024

Recent unvented installation carried out in Chafford Hundred.
We removed the existing gravity fed cylinder and installed this new unvented cylinder, improving water pressure throughout the property.
For anything thing Unvented, give us a call.

09/04/2024

Emergency immersion change on this Megaflo Eco unvented cylinder today at a restaurant in Essex.
We drained the cylinder, removed the faulty immersion and stat and replaced them. Reconnected the electrics and tested.

07/03/2022

Recent job carried out in Brentwood, Essex.
We drained this Megaflo cylinder to remove and replace a couple of faulty immersions and stats.
Once the cylinder had drained we found a huge amount of limescale built up in the bottom of the cylinder which would have caused the problem with existing immersions.
We descaled the cylinder and fitted the new immersions and stats. Filled the cylinder back up and tested everything.
For anything unvented, please give us a call.

13/07/2021

This is a recent horizontal unvented cylinder we fitted in Brentwood, Essex. We fitting this cylinder alongside a new LG therma V heat pump. The old gas combination boiler was removed ready for the renewable revolution. 🏡 🌎 🌳

30/01/2019

Called out to a customer with a direct megaflo cylinder with no hot water this week in Brentwood, Essex.
Another blown cylinder stat due to poor electrical connections.
We replaced the stat, crimped the electrical connections and got the hot water up and running again.

22/01/2019

This is a recent immersion change we carried out in Leigh-on-Sea, Essex.
This is the top immersion of a direct cylinder. We drained the cylinder, removed the faulty immersion and Stat, then fitted the new one.
We always crimp our electrical connections for the stat to make sure we get a nice clean connection.
For any issues with your unvented cylinder please get in touch.
07809904442

12/06/2017

Called out to a water pressure problem last week in Brentwood, Essex.
The usual cause of this is the cold water combination valve, and this time was no different.
We isolated the mains, removed and replaced the faulty cold water valve and re-tested.

08/05/2017

Called out to Brentwood, Essex for a hot and cold water problem last week.
The customer complained that the hot and cold water pressure was lower than usual and the megaflo was taking too long to fill up.
After investigating the problem we found it to be a blocked cold water combination valve.
We removed the valve, cleaned it out and got the system back to its usual performance!