Copperwheat Conversions

08/06/2026

This is what a proper wet room looks like before the tiles go on.

Everyone sees the finished bathroom.

But this is the part that decides whether it actually lasts.

This room has had the full Wedi system installed properly — Wedi boards, mechanical fixings with washers, 610 adhesive between the boards, sealed joints, banding, tanking, and vapour protection through the steam area.

Because this isn’t just a normal shower.

It’s a wet room and steam shower, which means water, heat and vapour are constantly trying to find the weakest point.

A missed joint.
A poor corner detail.
A gap behind a fitting.
The wrong system in the wrong place.

That’s where bathrooms fail.

Before any tiles go on, every detail has to be thought through — wall-mounted taps, lighting positions, LED details, pe*******ons, corners, board joints and the full tanking build-up.

It’s not the glamorous bit.

It’s not the bit most people notice.

But it’s the bit that protects everything behind the finished bathroom.

Tiles make it look finished.

The preparation underneath is what makes it last.

22/05/2026

Not even finished yet, but already looking incredible.

This utility room is currently acting as the temporary kitchen while the main works continue, but we’ve still detailed it properly with birch ply lining, clean finishes and practical layout.

The doors and windows aren’t even in yet, but you can already see the level this project is heading towards.

Behind the scenes, the airtight detailing is now complete in this area too — the bit most people never see, but one of the most important parts of the build.

12/05/2026

This is the detail behind a high-performance house.

In this wet room, we’ve fitted ply infill boards between the joists and taped every joint with Tescon No.1 to help create a continuous airtight layer.

We’ve then carefully sealed around all the pipes and cables passing through, because airtightness is only as good as the weakest gap.

Over the remaining first-floor overhang, we’ll be running Intello membrane, then taking that up the wall, across the ceiling, and tying it back into the airtight layer in the master bedroom on the other side.

It takes more time, but this is how you create a high-performance house.

03/04/2026

This job is a proper step up in detail for us.

Exposed glulam joists, BB grade ply finish, and a full airtightness strategy running through the build.

We’re taping every joist pe*******on, sealing junctions properly, and using thermal break materials like Marmox to reduce cold bridging — not just ticking boxes, but actually thinking about how the building performs long-term.

Flat roof window going in, aluminium capping to protect exposed elements, and everything tied together so it not only looks sharp but works properly behind the scenes.

We’re not claiming to be airtightness specialists — but we’re learning, pushing standards, and taking what we’re doing here into every future job.

Always improving. Always building it properly.

Because it’s not just about how it looks when it’s finished — it’s about how it performs for the next 30+ years.

03/04/2026

This one’s a bit different to a standard build.

We’ve got exposed glulam joists coming through internally, so everything you don’t normally see… suddenly matters.

Every joist pe*******on is being fully sealed.
Airtight tapes, air tight paint, and careful detailing throughout to stop uncontrolled air leakage.

On top of that, we’re running BB grade birch ply as the structural deck, with aluminium capping externally to protect and finish the exposed elements properly.

We’re also introducing thermal break detailing using Marmox to reduce cold bridging — small details, but they make a big difference over time.

Flat roof window going in as well, so all of this needs to tie together properly — structure, insulation, and airtightness all working as one system.

We’re not claiming to be airtightness specialists — but on projects like this, you learn fast, you adapt, and you raise your standards.

That’s the goal on every job:
Do it properly.
Make it last.
Keep getting better.

01/04/2026

Most people just see the finished roof…
But what matters is what’s underneath it.

On this one we:
Retained the original tiles to keep the character of the house
Replaced the old felt with a breathable membrane
Installed a ridge ventilation system to prevent moisture build-up
Added two new Velux roof windows
Installed a new steel ridge beam to properly support the structure
From the outside, it looks like a tidy roof job.
Underneath, it’s been completely rebuilt the right way.

This is the difference between making it look done…
and building it properly so it lasts another 50 years.

20/12/2025

Thinking about an extension or loft conversion — now or in the next couple of years?

I’ve put together a free Facebook group purely to help homeowners understand real build costs.

Not £/m² myths.
Not sales pitches.
Just clear, practical info to help you:
• make sense of prices
• understand what quotes actually include
• avoid costly mistakes or being caught out later

If you’re genuinely planning a project and want clarity before committing, you’re very welcome.

🔗 Link in bio

16/11/2025

16/11/2025

What We Expect:

• No lateness — reliability is non-negotiable.
• No phones on site — stay focused and ready to graft.
• Strong work ethic — willing to learn, listens, takes pride in the job.
• Respect for our customers — they mean everything to me, and they should to you.
• Hard-working — loading out, digging, carrying materials, keeping the site spotless.
• Team player — works well with subcontractors on site and the rest of the team.

And here’s the important part:
If you turn up, graft, and show the right attitude, there’s plenty of room to learn, progress, and earn more. The right person will grow with us.

28/09/2025

My hardest customer yet… my own family 😅

7 weeks of evenings and weekends, and I’ve finally given them the same touch of luxury I create for my customers. 🛁🚿

Couldn’t be happier with how it’s turned out — a real upgrade at home and worth every hour.

(Thanks to everyone who helped 🙌)
last but not least my dad Clive Copperwheat 🙌🏻