Strong Fabrication & Welding

Strong Fabrication & Welding Automobile repair and welding service based in sunderland. From mot repairs to full restorations, don't hesitate to give us a message!

Quite an extensive underside overhaul on this beautiful e46....Started off by dropping the rear subframe and stripping t...
05/09/2026

Quite an extensive underside overhaul on this beautiful e46....

Started off by dropping the rear subframe and stripping the interior out so we could do repairs to the Rear axle carrier panel.

Once any cracks were stopped drilled and welded we could weld in the plates supplied by redish motorsport.

After that we moved onto stripping the rear subframe down to its bare components and pressing out all the old tired bushes.

Next we dropped the front subframe with the engine in situ and stripped that down and took everything along to Stella Blast for powdercoating.

Any surface rust on the underside was taken back to nice shiny bare metal and then a good thick coat of Rust Encapsulator primer and finally a nice top coat of Buzzweld DTM tinted in RAL 1013 Oyster white.

Once the shiny powdercoated subframe components were back in house we pressed all new powerflex poly bushes in and got the frame back underneath the car.

Finally we built everything back up with new bearings, calipers, discs, pads, dust shields and some braided flexies to neaten things up abit.

If you would like to book your car in for similar works don't hesitate to dm me on WhatsApp or directly on Facebook!!

Now taking bookings for 3 months ahead so actually fast if you want to be in soon!!

Big shout out to Stella Blast for the quick turn around and extremely good pricing for all these e46 suspension componen...
25/08/2026

Big shout out to Stella Blast for the quick turn around and extremely good pricing for all these e46 suspension components theve turned out unreal!!

There'll be more to come on this customers beautiful e46 thats in for an underside resto/reinforcements of the rear axle carrier panel but for now let's just bask in the glory of these beautiful shiny parts!!

It appears I've caught the landrover buzz after playing with too many landy bits the past few months building the suzuki...
16/08/2026

It appears I've caught the landrover buzz after playing with too many landy bits the past few months building the suzuki...

Latest personal project 1993 ranger rover classic vogue...
Originally a 3.9 v8 but that's been took out and it's going to be getting something with abit more go 👀💨

We have this beast of a classic in the workshop at the moment undergoing a light restoration...1989 vauxhall carlton gsi...
16/07/2026

We have this beast of a classic in the workshop at the moment undergoing a light restoration...

1989 vauxhall carlton gsi 3000

Started off the same process as with any car we got it up on the ramp, took the wheels/body kit off and done a full assessment of the underside of the vehicle and what repairs it will need and informed the customer.

There was quite abit of work involved at the back end of the vehicle under the rear bumper, rear valance and quarter and a big section of the boot floor, luckily enough the customer sourced a panel for the valance but the rear quarters/ boot floor are no longer available so had to be fabricated in house.

Then we moved onto the inner arch/sill end plate area fabricated with 1mm steel and zinc primered before welding in place.

Once the outer sill was cut off it revealed a few areas that needed repairing on the inner sill and front chassis leg outrigger, so same again fabricated the panels, quick coat of zinc primer and seam welded in place.

Then for the final peice of the puzzle outer sill butt welded just under the door jam to retain the oem panel gaps and welds ground back flush for a seamless finish.

For any questions or queries don't hesitate to get intouch either via WhatsApp or dm the page!!

Located roker sunderland sr6

This was definitely one of our biggest jobs to date around 200 hours went into this little mini shell...New full front e...
09/07/2026

This was definitely one of our biggest jobs to date around 200 hours went into this little mini shell...

New full front end from the bulkhead forward. Wings (inner and outer) front scuttle and bonnet.

New floor pans, new rear floor panel, boot floor, valance, sills the list goes on...

If you have any questions or queries don't hesitate to get intouch wither via WhatsApp or dm the page!!

Now taking bookings for September/October 26

Based in sunderland sr6

Quick update on the little mini...Once I'd unstitched the front panels I could properly asses the bulkhead and see where...
30/04/2026

Quick update on the little mini...

Once I'd unstitched the front panels I could properly asses the bulkhead and see where needed some patches.

Repair panels made with 1mm steel and welded in place ready for the outer panels to go over the top.

Wing panels spotted in place and front scuttle clamped where it needs to be, quick test fit of the bonnet check the panel gaps then weld the scuttle in.

Slowly but surely making progress and she's starting to look like a mini again...

For any questions, queries or quotes don't hesitate to get intouch by either dm or WhatsApp!

Now taking bookings for August!!!

Located Roker sunderland sr6

*important past, present and future customers*Well what a good start to the week I've went on my phone and WhatsApp busi...
27/04/2026

*important past, present and future customers*

Well what a good start to the week I've went on my phone and WhatsApp business has uninstalled itself so I've lost all previous chats, if I'm currently doing work for you or if you have enquired about work could you please drop me another message with your details and il be in touch cheers

Plenty work to keep me busy on this little mini...Now taking bookings for july/august so don't hesitate to message the p...
22/04/2026

Plenty work to keep me busy on this little mini...

Now taking bookings for july/august so don't hesitate to message the page or via WhatsApp!!


Address

Whickham Street Roker
Sunderland
SR60EB

Telephone

+447988872998

Website

Alerts

Be the first to know and let us send you an email when Strong Fabrication & Welding posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category