AI BUILD

Directions Website Contact the business

AI BUILD Aibuild offers the world’s most advanced additive manufacturing software.

Fast, reliable and scalable, the Aibuild platform accelerates and automates the creation of even the most advanced, multi-axis toolpaths with a simple, user-friendly interface.

02/11/2026

This award-winning solar façade module curves to fit the building. VINE is a curved, multi-angle building-integrated photovoltaic module, developed by the University of Ulsan with 3D Factory and designed by Beom Kwan Kim of Studio Kwan.

Each module block was 3D printed in ABS and PETG on a KUKA KR 210 R2700-2 fitted with a custom extruder built by 3D Factory. The team used Aibuild CAM to compare fabrication conditions in simulation before printing, setting deposition direction and parameters for each non-standard geometry.

VINE won Construction Product Design of the Year at the BLT Built Design Awards, and is installed as a demonstration at HD Hyundai Construction Equipment. Proud to see Aibuild CAM in the workflow behind it.

28/10/2026

In this run, a three-bead 316L stainless steel wall goes through a full transient thermal simulation in Aibuild FETS. The thermal history is then passed to our AI surrogate model, which predicts distortion and residual stress.

Total time on a laptop GPU: 32 seconds.

Alongside the result, FETS shows a confidence score. Here it’s 66%: the probability that the predicted distortion is within 15% of a full thermomechanical simulation. If the score is low, rerun it with the full thermomechanical solve.

So you know when a quick answer is good enough to make a decision, and when to wait for the full run.

27/10/2026

Three rocket nozzle components, printed in C103 niobium alloy, mechanical testing of the C103 parts produced using Morphing Shield Technology showed properties exceeding the minimum requirements of the ASTM B655 specification.

LabAM24 delivered the parts to KARI, the Korea Aerospace Research Institute, using their in-house gantry wire-DED system, printed with Aibuild CAM. Testing showed ultimate tensile strength of 470 to 495 MPa, yield strength of 378 to 445 MPa, and elongation of 22.2 to 29.4%, all above spec and comparing favourably to as-cast benchmarks.

Wire-DED gets there with over 95% material utilisation on an alloy that's expensive to waste, and LabAM24's chamber-free Morphing Shield Technology removes the size limits of a sealed inert chamber altogether. Aibuild CAM's role was making the software compute the gas flow alongside the toolpath itself, a capability built specifically for their process.

The process has been tested, and parts are delivered. Next is the firing test with KARI.

20/10/2026

Dakacom's design lab turned spent coffee grounds into a chair.

At Dakacom DXL lab, the team regularly experiments with waste materials. This time it was dried coffee grounds, mixed into PLA and printed as the structure of Loop, a small interior and exterior chair.

Using Aibuild CAM, DXL designed Loop specifically for large format additive manufacturing from the outset, an interlacing toolpath built to combine strength with a distinctive layered pattern.

Printed with a CEAD extruder S25 on Belotti SpA, Loop took 3 hours and weighs 5.61kg. In sunlight, the small coffee particles inside the print become visible as the structure shifts with the light.

Great to see a waste material nobody wanted become something people want to sit in.

19/10/2026

Last week’s Aibuild FETS webinar is now available on-demand.

Together with DM3D we walk through GPU-accelerated thermomechanical simulation for DED, including a 60-hour DED build simulated in 87 minutes on a laptop GPU.

It covers temperature, residual stress and distortion across the whole build, with no HPC needed.

https://eu1.hubs.ly/H0zchRP0

Late Registration is NOW OPEN! Only 7 days left to register!Time is running out to join Open Chair, an international des...
16/10/2026

Late Registration is NOW OPEN! Only 7 days left to register!

Time is running out to join Open Chair, an international design competition challenging architects, designers and makers worldwide to rethink the future of furniture through 3D printing and open-source design.

Design it. Print it. Build it. Share it.

Create a full-scale chair that can be fabricated using a standard desktop 3D printer, assembled with minimal tools and shared with the world.

£1,000 Prize Pool

Open to participants worldwide

Desktop 3D Printing & Open-Source Design

IMPORTANT DATES
Registration Deadline — 22 October 2026
Submission Deadline — 6 November 2026
Winners Announcement — January 2027

Don’t miss your chance to be part of Open Chair!

REGISTER NOW AT https://eu1.hubs.ly/H0z7dk70

15/10/2026

If you work with DED or WAAM process, simulation or manufacturing, this one is for you. Live at 10am PT / 1pm ET / 6pm BST, Guy Brown, our CSO, and Rachel Mancuso of DM3D are running a live webinar on how GPU-accelerated thermomechanical simulation works, what it showed for a real DM3D part, and where it fits between toolpath planning and the first print. Q&A at the end.

Its CAM agnostic, up to 10,000x faster than existing solutions and runs on a GPU laptop.

https://eu1.hubs.ly/H0z5SWn0

14/10/2026

If your laptop has a GPU, it can run what we’re showing tomorrow.

Aibuild FETS runs full transient thermomechanical simulation on a standard laptop or workstation up to 10,000x faster than existing solutions, with no HPC needed. At 10am PT / 1pm ET / 6pm BST

https://eu1.hubs.ly/H0z4pCj0

13/10/2026

Engineering AI needs access to the tools engineers already use. A qualitative MIT study, based on 33 interviews across 28 companies, identifies higher-value agentic gains in coordinating multi-step workflows across tools, alongside near-term gains in structured, repetitive work and data-intensive synthesis.

The study identifies fragmented, machine-unfriendly data, stringent security and regulatory requirements, and legacy toolchains with limited programmatic access as key barriers to adoption. It also emphasises reliability, verification and human review.

That is the integration problem we built Aibuild OS around. It operates inside CATIA, SolidWorks, Rhino, Fusion and Aibuild CAM, the software your team already uses. It does the job, hands back native STEP, DXF or G-code, and your engineer reviews and signs off.

Your team keeps its tools, its data stays inside your security perimeter, and the work gets done to your standards for your engineer to approve or reject.

07/07/2026

Not sure which slicing strategy suits your part? Mesh Analysis in Aibuild CAM is designed to help.

First in this new series is AUTO.

Aibuild CAM’s AUTO mesh analysis runs every planar mode in sequence and returns the one with the best overhang result.

Let the do the evaluation before you make the call.

Address


Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00

Alerts

Be the first to know and let us send you an email when AI BUILD posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to AI BUILD:

Shortcuts

  • Want your business to be the top-listed engineering company?

Share