Victory Fasteners

Victory Fasteners Victory are a major stock holder & manufacturer of High Grade Alloy & Stainless Steel Fasteners

When the delivery deadline is non-negotiable, flexibility matters.At Victory Fasteners, we understand that urgent requir...
31/08/2026

When the delivery deadline is non-negotiable, flexibility matters.

At Victory Fasteners, we understand that urgent requirements rarely arrive with a convenient lead time. Our response is built around finding a way forward and doing everything possible to keep your project on schedule, wherever in the world the finished components are required.

High stock levels, an extensive range of bolt blanks and comprehensive in-house manufacturing capabilities give us the flexibility to respond quickly to both standard and bespoke requirements.

From customer drawing through to the finished component, Victory Fasteners can provide a complete single-source service, including:

• Precision machining
• Thread rolling and thread cutting
• Drilling, milling and broaching
• Component marking
• Inspection, testing and certification
• Plating, specialist coatings and thread patching

By coordinating manufacturing, quality control and final finishes through one experienced supplier, we can reduce delays, maintain traceability and keep production moving when time is critical.

One requirement. One accountable supplier. A determined response from drawing to worldwide delivery.

If you have an urgent, complex or difficult-to-source fastener requirement, speak to the Victory Fasteners team.

🌐 www.victoryfasteners.com
📧 [email protected]
📞 01902 544480

M42 × 480 Grade 12.9 DIN 931 Hex BoltsManufactured by Victory Fasteners from high-strength blank fasteners held in stock...
24/08/2026

M42 × 480 Grade 12.9 DIN 931 Hex Bolts

Manufactured by Victory Fasteners from high-strength blank fasteners held in stock, supporting a quick and flexible response to the customer’s requirement.

Specification:

• M42 × 480
• Property class 12.9
• DIN 931 hex bolt
• 115mm thread
• Zinc-plated finish
• Complete with nuts and washers

The stocked blanks were cut to the required length before the 115mm threads were produced using our in-house screw-cutting capability. The completed bolts were then prepared for zinc plating.

Our comprehensive stock-holding of blank fasteners allows us to respond quickly to requirements for non-standard dimensions and specific thread lengths.

Stocked blanks, in-house engineering and complete fastener assemblies, coordinated through a single source.

Contact Victory Fasteners to discuss your next requirement.

European B7 | L7 Bolting Industrial Fastener Blanks European Material Extensive UK Stockholding 3.1 Certificati...
16/08/2026

European B7 | L7 Bolting Industrial Fastener Blanks

European Material
Extensive UK Stockholding
3.1 Certification
Mill Test Certificates
In-House Manufacturing

Victory Fasteners supplies one of the UK's most comprehensive ranges of European manufactured Grade B7 | L7 bolting blanks. Available in a wide range of diameters, lengths and head styles, our stock is supported by full material traceability, EN 10204 3.1 certification and Mill Test Certificates.

Whether you require bolt blanks ready for your own machining operations or fully finished industrial fasteners manufactured to customer drawings, our extensive stockholding and in-house CNC machining capabilities provide a responsive, dependable solution for planned production and urgent engineering requirements.

From Stock Blank to Finished Fastener | In-House at Victory FastenersA recent requirement for a 1.1/8" 7UNC × 5" SAE 8 H...
14/08/2026

From Stock Blank to Finished Fastener | In-House at Victory Fasteners

A recent requirement for a 1.1/8" 7UNC × 5" SAE 8 Hex Set Screw demonstrates the advantage of combining extensive stockholding with in-house engineering capability.

Starting with a stocked blank, the component was:

⚙️ Cut to the required length
⚙️ CNC machined
⚙️ Fully threaded 1.1/8" 7UNC
⚙️ Completed to customer specification

Victory Fasteners holds a substantial stock of industrial fastener blanks across high-performance grades including 8.8, 10.9, 12.9, B7 and L7, supported by original mill certification for material traceability.

By stocking blanks and carrying out machining and threading in-house, we can provide a flexible route to standard, modified and special fastener requirements.

Stock. Machine. Thread. Inspect. Supply.

In-House Engineering | M22 A4-70 DIN 982 Hex Nyloc NutFrom stocked round bar to finished component.This M22 A4-70 DIN 98...
12/08/2026

In-House Engineering | M22 A4-70 DIN 982 Hex Nyloc Nut

From stocked round bar to finished component.

This M22 A4-70 DIN 982 Hex Nyloc Nut is a good example of the flexibility within Victory Fasteners’ in-house engineering facilities.

⚙️ Round bar stocked
⚙️ Machined in-house to DIN 982 specification
⚙️ Nylon insert fitted
⚙️ Full inspection
⚙️ Component etched
⚙️ Single-source manufacture and supply

Our engineering capabilities enable us to manufacture a comprehensive range of standard, modified and specialist fasteners and components, providing customers with greater flexibility when an off-the-shelf solution isn’t suitable.

From material selection and machining through to inspection and identification, we keep control of the process while maintaining the responsive customer service at the heart of Victory Fasteners.

In-house engineering. Manufacturing flexibility. Single-source supply.

Precision Machined from Round BarAnother manufacturing project completed by the Victory Fasteners engineering team.M12 ×...
06/08/2026

Precision Machined from Round Bar

Another manufacturing project completed by the Victory Fasteners engineering team.

M12 × 90 DIN 933 Grade 31803 (D6-80) Duplex Stainless Steel Hexagon Head Set Screws

Manufactured from sourced round bar using our in-house machining capabilities:

• Round bar sourced through trusted local supply partners
• Cut to length
• Precision turned
• Hexagon head milled
• Thread machined
• Component etched for identification and traceability
• In-house dimensional inspection

From material sourcing through to final inspection, Victory Fasteners delivers precision-engineered fasteners manufactured to customer specification.

Precision. Capacity. Reliability.Another large production batch successfully progressing through our West Midlands manuf...
03/08/2026

Precision. Capacity. Reliability.

Another large production batch successfully progressing through our West Midlands manufacturing facility.

This order features M16 x 1.50 x 40/40 Grade 10.9 DIN 7991 Socket Countersunk Screws, precision CNC machined from stocked fastener blanks with a fine pitch thread, before preparation for GEOMET® 500A surface treatment.

By maintaining extensive stocks of quality-assured fastener blanks, complete with 3.1 Certification and full material traceability, we're able to respond quickly to both scheduled production programmes and high-volume customer requirements.

From prototype quantities through to full production batches, Victory Fasteners provides a complete single-source solution, combining precision manufacturing, quality assurance and dependable lead times.

If you're looking for a manufacturing partner for bespoke industrial fasteners, we'd be pleased to discuss your next project.

Bespoke Engineering. Manufactured In-House.Every bespoke fastener begins with understanding exactly what the customer re...
31/07/2026

Bespoke Engineering. Manufactured In-House.

Every bespoke fastener begins with understanding exactly what the customer requires.

For this project, Victory Fasteners manufactured M42 × 475 Grade 10.9 Double Ended Studs with Reduced Shanks, produced entirely in-house from 42 mm round bar to the customer's drawing.

✔️ Precision turned reduced shank
✔️ Thread rolled for strength and accuracy
✔️ Comprehensive in-house inspection
✔️ Individually cast coded for complete traceability
✔️ Supplied with full certification

From one-off requirements to production quantities, Victory Fasteners combines precision engineering, quality assurance and dependable service to deliver bespoke fastening solutions for demanding applications.

Engineered with precision. Manufactured with confidence.

🇬🇧➡️🇮🇪 Fast Turnaround Export Order CompletedAnother quality fastener solution recently supplied by the Victory Fastener...
28/07/2026

🇬🇧➡️🇮🇪 Fast Turnaround Export Order Completed

Another quality fastener solution recently supplied by the Victory Fasteners team.

For this project, we supplied M10 x 150 Grade 10.9 DIN 931 Hexagon Head Bolts for an export customer in Ireland. By utilising our extensive stockholding, we were able to achieve a rapid turnaround before the bolts received their Geomet® 500B corrosion-resistant coating, ensuring they were ready for dispatch without unnecessary delay.

Having comprehensive stock available means we can respond quickly to customer requirements, while our network of specialist finishing partners allows us to provide a wide range of coatings and surface treatments to suit demanding applications.

Whether you require standard fasteners, specialist finishes or export logistics, Victory Fasteners is here to help.

📞 Get in touch with our team to discuss your next fastening requirement.

Address

Unit 4 & 5, Dunstall Hill Trading Estate, Gorsebrook Road
Wolverhampton
WV60PJ

Website

Alerts

Be the first to know and let us send you an email when Victory Fasteners posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category