Bazigos - injection moulds for thin wall packaging

18/09/2020

Dear packaging friends,

It is with great pleasure and pride that we send you below invitation.

Unfortunately one of the most beloved trade fairs in our field, Fakuma, will not take place this year. On that occasion we would have shown, on our stand, an automation cell with an IML system. Therefore the disappointment was enormous when the Fakuma organization decided to postpone this year’s edition. Although we do understand this decision we, together with our partners, thought it was a pity that the IML automation line could not be shown to a larger public than ourselves.

Campetella, Arburg, Viappiani, Moretto, Gammaflux, Mevisco, D.Souris & Co and Bazigos have been working hard together to organize a special event in a special time. The whole month of October the IML system will be shown in the beautiful region Le Mache in Italy in the premises of Campetella.

If you followe the link link you are able to choose your preferred date and time and see the equipment of above mentioned partners in all safety and without the rush of a trade fair. A dedicated IML system and time dedicated only to you.

For more information please contact us at [email protected] or your direct contact at one of our partners.

We hope to see you soon in Italy and we take this occasion to thank once again our partners with special thanks to Campetella.

Warm regards from Bazigos.

28/04/2020

Il produttore di stampi per imballaggi a parete sottile, Bazigos, ha progettato e prodotto uno stampo ad iniezione e stampo progressive per la produzione di uno maschera facciale.

"Il nostro team ha compiuto uno sforzo straordinario nella progettazione e produzione di stampi e matrici per uno maschera nella lotta contro Covid-19", afferma Manos Bazigos, CEO di Bazigos.

Bazigos, con sede ad Atene, ha utilizzato le sue risorse ingegneristiche e le sue strutture produttive per aiutare questa lotta contro il virus corona trasformando un disegno 3D in uno stampo ad iniezione completamente funzionale in soli 8 giorni.

Manos Bazigos aggiunge “Tramite il nostro reparto di stampaggio e fustellatura siamo in grado di produrre in modo tempestivo lo scudo facciale completo. Siamo anche in grado di produrre lo stampo entro un paio di settimane per gli stampatori ad iniezione in tutto il mondo "

La protezione per il viso è stata sviluppata per proteggere la faccia e sopratuti gli occhi dagli schizzi in modo che si accoppi perfettamente con la mascherina chirurgica e combatte contro il contagion oculare. Pertanto può essere applicato in molti modi, pensate a strutture di cura, supermercati, stazioni di servizio e molto altro.

Sia i prodotti completi che gli stampi sono ora disponibili per tutte le parti interessate. Maggiori informazioni sono disponibili all'indirizzo [email protected] o mobile / whatsapp +31629454399

27/04/2020

Thin wall packaging mould maker, Bazigos, has designed and produced a tool and die for the production of a face shield in the past week.
“ Our team has accomplished an extraordinary effort in designing and producing both mould and die for a face shield in the fight against Covid-19 “ says Bazigos CEO Manos Bazigos.
Athens based Bazigos has used its engineering resources and production facilities to help this fight against the corona virus by turning a 3D drawing into a fully functional injection mould in only 8 days.
Manos Bazigos adds “ By means of our own moulding and die-cut department we are able to produce the complete face shield in a timely manner. We are also able to produce the mould within a couple of weeks for injection moulders around the world “
The face shield has been developed to protect the face mask from splashes so it pairs perfectly... direct splash to eyes is also prevented. Therefore it can be applied in numerous ways, think of care facilities, supermarkets, gas stations and much more.
Both complete products and mould are now available for all interested parties. More information is available at [email protected] or mobile/whatsapp +31629454399

23/04/2020

4 cavity 200ml cup mould installed on our Demag El-Exis SP 350-1600 ready for T2

20/04/2020

Sneak preview of T1 4 cavity . Final decoration

20/04/2020

17/04/2020

https://www.polimerica.it/articolo.asp?id=23639
Some good news finally ! Let's hope all the other manufacturers will be able to re-open soon as well, in ALL countries. in the meantime..STAY SAFE

Riparte la costruzione di presse ad iniezione negli stabilimenti austriaci, grazie all’allentamento delle misure di lockdown deciso dal Governo.

16/04/2020

Why an from ? Check out our website www.bazigos.eu and see for yourself !

16/04/2020

31/03/2020

Hi ! We're
Bazigos: injection moulds for thin wall packaging
Nice to meet you the digital way !
Please meet our complete team !
Like in many companies throughout the world this team of highly skilled professionals unfortunately is not able to work all together at the same place and same time due to Covid-19.
As we seriously consider and respect the health of our customers, staff and suppliers we have adapted our modus operandi for the coming weeks.
Our mould engineers have set up their offices at home, as well as our accounting and sales & marketing department and are thus fully operational. The production department has been spread out over shifts in order to guarantee first of all the safety of our staff and fight against the spread of the virus. Furthermore in this way continuation of running and new projects is assured and delivery times will be met without any delay.
The 70 of us hope to be able to welcome our existing customers for mould trials again soon and to welcome new customers in person in our premises in Athens.
For the time being we are able to meet and greet the digital way. Follow us on Facebook, Linkedin, Twitter and Instagram. Or send us your questions our enquiries directly via email, Simply click on the button below. Preference for whatsapp ? Connect easily with your mobile and click on the whatsapp button on our website or add +31629454399 to your contacts.

Stay Safe, Stay Healthy