Flynn Crane Hire & Transport

05/06/2026

04/06/2026

“Made for the Job”

Our Palfinger Ireland Ltd. PCC57.002 once again providing a solution to an otherwise expensive problem.

Lifts to roof level would normally have to of been completed from the road at the front of this building on Dublins Hill Street, a simple lift you might think. Factor in the permit costs, traffic management and reduced working hours during the week and this becomes a very expensive problem.

By using a rear lane way, we were (just!) able to get our Palfinger PCC57.002 into position at the rear of the building meaning no additional costs to our client Elliott Group.

Yes, we do offer fully tailored crane solutions with full road / lane closures and traffic management when required, and yes, we always think outside the box to offer our customers the best possible solution.

For all your “problems” contact Flynn Crane Hire 👇🏻

📞 045 900709

📧 [email protected]

🌍 www.flynncranehire.com

20/04/2026

We don't believe in "It can't be done"!

6,000kg Concrete chamber lifts in a remote setup area with 38kV overhead lines making a traditional mobile crane setup impossible, no problem to Flynn Crane Hire and our fleet of Palfinger Ireland Ltd. cranes.

There's only one thing better than a Palfinger PCC, and that's two of them! We used our Palfinger PCC115.002, Palfinger PCC57.002 Crawler unit, Palfinger PK76002 & Nooteboom Trailers OVB-48-03V Power Steered trailer to carry out these works.

Chambers were delivered to our storage facility in Blessington and transported to site on demand, using the PK76002 the chambers were loaded onto the PCC57.002 Crawler Unit and transported through rough terrain to the PCC115.002, which lifted them with ease placing them into the pre-excavated pits on site.

There were two alternatives to this;
Option 1: To switch out the 38kV power lines to allow a mobile crane lift the chambers into position. Virtually impossible.
Option 2: To build a roadway through the field and construct a crane pad to allow a mobile crane to lift the chambers into position. This would cost the client tens of thousands of euros to carry out.

From initial phone call to project completion, our highly experienced team put together a plan, issued detailed lift plans & RAMS, and carried out the works to the highest of standards on site, leaving us with a very satisfied customer.

For all your Lifting requirements, no matter how 'impossible', be sure to contact Flynn Crane Hire.

🌍 www.flynncranehire.com

📞 045 900709

📧 [email protected]