Ecoheat Ireland

15/05/2022

02/06/2021

Have you ever wondered if a heat pump is suitable for your house but tou think that your house is too big? We can look at a solution that suits any house. This house is served by two 14kW units in a 'cascade' arrangement. This house is 450sqm split over two storeys, with a mixture of UFH and radiators throughout. The existing heating system was divided up into 4 heating zones; 3 UFH zones downstairs and 1 zone of radiators upstairs. The thermostats in each zone are wired back to Heatmiser wiring centers to provide better temperature control.

Outdoor unit - 2No. PUZ-HWM140VHA
Indoor unit - PAC-IF073B (FTC6)

The house has a new 500L High Gain Heat Pump Cylinder installed to cope with the hot water demand of the house. The heat pumps will prioritise hot water, so you never run out.

If you'd like more information about retrofitting your heating system, contact us today.

061-513632 or [email protected]

27/05/2021

This 8.5kW monobloc has been retrofitted into this existing bungalow going through a retrofit as part of the SEAI Better Energy Homes Scheme. The floors were dug up and new a new UFH system was installed throughout the house. KSL Plumbing and Heating have the flushing machine connected up and ready to purge any air out of the system. System will be drying the house out in no time!

If you have any queries about Heat Pump Grants for your home or would like a quote on a new build project, give us a call or send us an email.

061-513632 or [email protected]

Outdoor unit - 8.5kW PUZ-WM85VAA
Indoor unit - 210L EHPT21X-UKHDW

20/05/2021

Unit delivered and ready to be installed👍 Keeping the team at KSL Plumbing and Heating busy😉

Outdoor - 14kW Monobloc Heat Pump PUZ-HWM140VHA
Indoor - 300L Pre-Plumbed Cylinder EHPT30X-UKHDW

17/05/2021

Another day another heat pump installed. The lads at Professional Plumbing Solutions Ltd. are keeping us busy. Retrofit project to an existing bungalow which has been converted into a dormer. As part of the building works, the existing floors were dug up so UFH was installed throughout the ground floor. The upstairs bedrooms went with standard steel radiators with TRVs.

Outdoor Unit - 8.5kW Monobloc PUZ-WM85VAA
Indoor Unit - 210L Pre-plumbed Cylinder EHPT21X-UKHDW

This project was eligible for the SEAI Heat Pump Grant, which was worth €3500 to the customer. Contact us if you'd like more information about an A2W heat pump for your house.

[email protected] or 061-513632

13/05/2021

We've been kept busy since the lockdown restrictions were lifted. Another unit installed by the team at Professional Mechanical Solutions who are giving their colleagues at Professional Plumbing Solutions Ltd. a run for their money. This is one of first projects using the new R32 outdoor unit and FTC6 main controller. The house is a split of 2 UFH heating zones downstairs and radiators upstairs.

Outdoor Unit - 8.5kW PUZ-WM85VAA
Indoor Unit - 200L Packaged Cylinder EHPT20X-MHEDW

If you're interested in installing a heat pump in your new build or existing home, get in touch with us to discuss options that suit your needs.

[email protected] or 061-513632

07/05/2021

If you were wondering how loud a heat pump is when it's running, check out the video below of one of our Ultra Quiet units in operation.

Model - PUHZ-W85VAA

07/05/2021

Heating system in this new build, 175sqm bungalow with UFH throughout, up and running. This is one our last projects that will be using the older R410a outdoor unit and FTC5 cylinder before we switch over fully to the newer and more eco-friendly R32 outdoors with FTC6 cylinders.

Outdoor Unit - 8.5kW PUHZ-W85VAA
Indoor Unit - 250L Pre Plumbed Cylinder EHPT25X-UKHCW

Excellent job by the team Kerr Building Services-KBS and Michael Flaherty Heating & Plumbing. Looking forward to working with this team again in the future.

30/04/2021

Couldn't ask for a nicer view to finish out the week👌 Another project that was on hold due to the lockdown but we're making progress again. 11.2kW a2w heat pump installed alongside our 250L preplumbed cylinder with 2 UFH zones throughout. Thanks to the team at KSL Plumbing and Heating for getting the UFH system installed.
-wm112vaa -ukhdw

23/04/2021

Heating back up and running for a local Nursing Home. The previous legacy heat pump had reached it's end of life and was due a replacement and we happily stepped in to help. A new Mitsubishi Electric Ecodan 14kW R32 A2W heat pump was installed for an existing UFH system and set up for heating only. Thanks to the team at Pro Mech Solutions for the quick turn around to get the heating system back up and running.

-HWM140VHA

22/04/2021

Lockdown restrictions have lifted and we're delighted to be back doing what we do best. Existing house getting a home energy upgrade and a new extension built onto it. UFH pipes have been laid and waiting on concrete screed to be laid before we can fit a new 8.5kW R32 A2W heat pump and 210L hot water cylinder. As always, a neat and professional job is being done by the team at KSL Plumbing and Heating

21/12/2020

Delighted to announce that our new eShop is now live on our website, www.ecoheatireland.ie. You will be able to purchase accessories for Ecodan heat pumps and annual services for Ecodan heat pumps and cylinders. We will be offering UFH kits in the new year, so watch this space!

Merry Christmas and a Happy New Year.

We offer design services for sizing the most suitable heat pump for your building. We will recommend the size of the heat pump and cylinder required, along with all associated accessories. This ensures our clients get a recommendation on a system that is specifically suitable to their building.