O'Donnell Engineering

Call Directions Website Contact the business

O'Donnell Engineering Design and Manufacturer of quality agricultural handling equipment

O’Donnell Engineering is a family-owned recognised designer, fabricator and installer of a diversified range of livestock handling and housing equipment for the agricultural sector.

23/10/2026

Crush Squeeze Panel
Squeeze panel adjusts the width and height of cattle crush.
Reduces width up to 4 ½” over three intervals
Allows standard cattle crush to be used for different size animals
Easily operated with three different width settings and spring latches
Removable panel is compatible with company’s standard panel cattle crush
Panel can be used in conjunction with all cattle crush accessories (platform scales, side step, etc)
https://odonnellengineering.ie/product/crush-squeeze-panel/

Crush Caesarean Panel
Removable panel is compatible with company’s standard panel cattle crush
Panel can be used for both caesarean or suckling
Side panels drop down and lift up for maximum access
Panel can be opened similar to individual panels as a gate with removal of pin
Panel can be used in conjunction with all cattle crush accessories (platform scales, side step, etc)
https://odonnellengineering.ie/product/crush-caesarean-panel/

20/10/2026

Liam met up with John from PSD agri, one of our distributers, in their branch in Muckalee. Make sure to call in to them for any of your ODE equipment needs

16/10/2026

ODE Diagonal barrier full gate is designed to fully swing open giving complete access to pens

Heavy duty rectangular section at heal with solid heal irons welded to eliminate sagging when opening

Double latches as standard for animal safety and easy operation

Comes standard with timber installed on silage side and galv sheeting on livestock side

Solid rubber wheel with steel rim for easier opening mounted to frame

The standard length to suit 4.8m bays with custom manufacture also catered for.

Straight and “S” Type versions available

13/10/2026

Stainless Tipp over Drinkers

Rotating stainless steel drinkers available in following standard sizes:
– 1m (110 Litres)
– 1.5m (170 Litres)
– 2m (220 Litres)

Rotating troughs for fast clean out operated via integral handle

Mounting systems allows floor, end cubicle, wall or internal penning gate installations.

Comes with protection cage and Hansen fast fill ballcock system as standard

Pre-installed flexi hose connection system eliminates leaks and water hose breakages

Circular forcing pens for provide safe and easy loading of livestock into crush or loading bay.Spring loaded forcing gat...
12/10/2026

Circular forcing pens for provide safe and easy loading of livestock into crush or loading bay.

Spring loaded forcing gate latch with multiple locking positions along the curved panel prevent user and animal stress.

Modular design allows install on new or pre-existing facilities.

09/10/2026

30mm Honeycomb interlocking rubber Mat.
- 1.8m x 1.15m size
- Specially designed to cater for increased cow comfort with internal honeycomb structure
- Hammer top anti-slip finish which is non-porous or abrasive
- Easy to clean and wash down
- Predefined and reinforced countersink anchor positions for secure and smooth surface finish

35mm Honeycomb interlocking rubber Mat.
- 1.8m x 1.10m size
- Combination Foam and Rubber mattress increases cow comfort, welfare and productivity
- Mat has a sealed latex foam layer underneath rubber mat, which is interlocking on two sides with a sloped profile at the rear edge for easy access and hygiene
- Latex foam underneath provides excellent comfort, durability and firmness.
- Spacers available if beds sizes vary too much
- 25mm Latex foam sealed in individual plastic bag
- Predefined and reinforced countersink anchor positions for secure and smooth surface finish

20mm economy roll out rubber Mat with comfort design underneath
- 1.7m in depth cut to suit bed lengths.
- Full roll lengths are 65m
- Full length rubber joiner used when extending existing runs and completely seals between mats.
- Design provides comfort and thermal insulation with hammer surface preventing slipping
- 10 Year warranty as standard

35mm roll out rubber mat with specially designed structure that provides the highest comfort and thermal insulation in the G&H range.
- 1.8m in depth cut to suit bed lengths.
- Full roll lengths are 35m
- Full length rubber joiner used when extending existing runs and completely seals between mats.
- Hammer surface prevents slipping
- innovative base allows for more flexibility and a level of deflection imitating the natural ground
- 10 Year warranty as standard

02/10/2026

🔥NEW PRODUCT LAUNCH 🔥Our new Stainless Tipp over individual Drinker with 8litre capacity, tips over for easy cleaning, stainless steel bowl with galvanized protection cage

29/09/2026

Aoidhe discusses the O'Donnell Engineering calf troughs used for our dairy calf to beef system on farm.

29/09/2026

20ft long with hydraulic lift axle and lock out bar for easy transport
Complete checker plate throughout floor and sheeted tapered sides
Hoof crate incorporated with separate hand winch included
Compatible with any ODE head locking gate
Side opening gates for hoof care and access gate behind animal
Rear opening gate operated from side with spring loaded latch receiver
Rear reflectors and lighting board
Swing out 4/B adjustable gates on each side to connect to holding pen
Very robust and durable crush suitable for separated farms

Address

Tulla
Emly
E34YR91

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 9am - 12pm

Telephone

+3536257209

Website

Alerts

Be the first to know and let us send you an email when O'Donnell Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to O'Donnell Engineering:

Shortcuts

Share

Category