What are the opening hours?

Monday 9am - 6pm Tuesday 9am - 6pm Wednesday 9am - 6pm Thursday 9am - 6pm Friday 9am - 6pm Saturday 9am - 6pm

IDIS INDIA

Name: IDIS INDIA
Address: 24, Krishna Estate, bakrol Bujrang, Bakrol ahmedabad 382430., Ahmedabad, 382415, IN
Telephone: +919904040126

Home
India
Ahmedabad
IDIS INDIA

Innovating quality plastic enclosures at affordable prices. Join us for reliable, economical solutions. Direct manufacturer of solar components from Ahmedabad.

Gujarat. Most trusted company and presence in >16 States of India. Cost effective and premium items from Idis India

14/07/2026

Struggling to choose the right enclosures for telecom equipment? Read this first 👇
https://idisindia.com/enclosures-for-telecom-equipment/

Outdoor telecom setups face real challenges — vibration from wind loads, extreme temperatures, RF interference, and security risks at remote sites. I-closure's enclosures for telecom equipment are built to handle all of this, from 5G small cell installations to fiber splice compartments, without compromising IP65 protection.

What makes IDIS India's enclosures stand out is the thought behind every detail — reinforced mounting, thermal management options, RF-transparent polycarbonate, and tamper-resistant locking. Whether you're mounting on a tower or a street pole, there's a solution that fits. Check out the full comparison →

11/07/2026

Picking the wrong enclosure for factory automation can cost you way more than you think. Here's what to look for 👇
https://idisindia.com/enclosures-for-factory-automation/

Enclosures for factory automation aren't just boxes — they need to handle heat, vibration, EMI interference, and messy cable routing all at once. I-closure's IP65-rated ABS enclosures are built with passive thermal venting, conductive EMI gaskets, and integrated cable management so your PLC panels and HMI stations stay protected even in the roughest shop floor conditions.

And when your automation setup grows, you won't need to start from scratch. I-closure's modular design lets you expand systematically — same mounting system, same cable entry methods, less hassle. Check out the full comparison →

10/07/2026

Confused about IP65 vs IP66 vs IP67? Here's which one your project actually needs 👇
https://idisindia.com/ip65-vs-ip66-vs/

Not all IP ratings protect against the same thing — and that's where most buyers go wrong. IP65 handles rain and general outdoor exposure well. IP67 protects against temporary submersion. But IP66? That's your go-to for high-pressure washdowns. A higher number doesn't always mean better overall protection. Knowing the difference can save you from equipment failures and costly replacements.

At I-closure, we manufacture both IP65 and IP67 enclosures tested right here at our Ahmedabad facility. See how we stack up →

09/07/2026

Struggling to pick the right 10 way MCB box for your project? Read this first 👇
https://idisindia.com/10-way-mcb-box/

A 10 way MCB box from I-closure gives you 10 separate branch circuits in a compact space — without replacing your entire panel. It supports both single and double pole MCBs, comes with pre-positioned DIN rail slots, and includes proper wire management guides to keep installations clean and serviceable.

Available in ABS and polycarbonate with IP65 rating as standard, these enclosures work well for both indoor commercial setups and outdoor industrial environments. Check out the full comparison →

07/07/2026

Struggling to choose the right pole mount enclosure for outdoor installations? Here's what you need to know 👇
https://idisindia.com/pole-mount-enclosure/

When electronics go up on a pole — whether it's a CCTV camera, small cell unit, or street lighting controller — they face vibration, wind, rain, and years of neglect. I-closure pole mount enclosures are built specifically for these conditions, with vibration dampening, telescoping brackets that adjust on-site, and multi-layer conduit sealing that keeps water out even during heavy storms.

What sets IDIS India apart is the engineering support behind every installation. From wind load calculations to antenna mounting provisions and utility pole load distribution, the team helps you spec the right solution before a single bracket goes up. Check out the full comparison →

03/07/2026

Choosing the right junction distribution enclosures for your facility? Here's what you need to know 👇
https://idisindia.com/junction-distribution-enclosures/

Getting electrical enclosures right isn't just about fitting wires into a box. It's about load balancing, wire management, code compliance, and making sure your team can actually maintain it without a headache. I-closure junction distribution enclosures from IDIS India come in ABS, polycarbonate, and PC/ABS materials with IP65 weatherproof protection — built for commercial and industrial installations that demand long-term reliability.

From DIN rail mounting for MCBs to proper wire routing and ventilation design, every detail is thought through. Check out the full comparison →

02/07/2026

Choosing the wrong handheld enclosure can cost you time, money & user trust. Here's what to look for 👇
https://idisindia.com/handheld-enclosure/

A good handheld enclosure isn't just about protection. It's about grip comfort during long hours of use, smart button placement, drop resistance, and proper weight balance. IDIS India has worked with 1200+ clients to get all of these details right — from the grip diameter to corner reinforcement that handles real-world drops.

I-closure enclosures also think about the small things that matter in the field — like tool-free battery access, cable management, and easy service access without breaking the environmental seal.

Check out the full comparison →

29/06/2026

Struggling to choose the right solar farm enclosures? This comparison breaks it all down 👇
https://idisindia.com/solar-farm-enclosures/

When you're running a ground-mount solar project, your enclosures deal with a lot — wind, UV radiation, monsoon rain, and desert heat, all at once. I-closure's IP65-rated polycarbonate enclosures from IDIS India are built to handle exactly that. With SS304 stainless steel hardware, UV-stabilised material that lasts 10+ years, and MNRE/BIS compliance, they're designed for utility-scale reliability, not just basic weather protection.

What makes solar farm enclosures truly work is the full picture — proper cable management, easy maintenance access, surge protection housing, and the right mounting setup for your racking system. Check out the full comparison →

27/06/2026

Struggling with slow prototype cycles for your enclosure? Here's what you need to know 👇
https://idisindia.com/enclosure-3d-printing-service/

Not all 3D printing technologies work the same way. FDM is great for functional testing at a lower cost, SLA gives you smooth finishes close to injection moulded quality, and SLS handles complex geometries with strong mechanical properties. Choosing the right enclosure 3d printing service depends on your material needs, tolerances, and how close you are to final production.

At I-closure, we help product developers move from prototype to production without starting over. Once your design is validated, our team at IDIS India supports the shift to injection moulding — same functionality, better unit economics. Find out which one fits your needs →

Address

24, Krishna Estate, Bakrol Bujrang, Bakrol Ahmedabad 382430.
Ahmedabad
382415

Opening Hours

Monday	9am - 6pm
Tuesday	9am - 6pm
Wednesday	9am - 6pm
Thursday	9am - 6pm
Friday	9am - 6pm
Saturday	9am - 6pm

Telephone

+919904040126

Website

http://www.idisindia.com/

Alerts

Be the first to know and let us send you an email when IDIS INDIA posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to IDIS INDIA:

Want your business to be the top-listed Engineering Company in Ahmedabad?