Seenu industries

Seenu industries air compressor

Contact 097900 15149
06/05/2025

Contact 097900 15149

For a 5.0 HP two-stage reciprocating air compressor, the top block specifications typically include the following parame...
18/09/2024

For a 5.0 HP two-stage reciprocating air compressor, the top block specifications typically include the following parameters:

1. Horsepower (HP):

5.0 HP motor.

2. Stages:

Two-stage compression for higher pressure output and efficiency.

First stage compresses the air to an intermediate pressure, then it passes through an intercooler before entering the second stage for further compression.

3. Cylinders:

Typically 2 cylinders, with at least one large and one small cylinder (for the two stages).

4. Maximum Pressure:

Pressure ratings typically range from 175 PSI.

Some industrial models may go up to 200 PSI or higher.

5. CFM (Cubic Feet per Minute):

Output is generally around 15 to 20 CFM depending on the specific model.

6. RPM (Rotations Per Minute):

The pump RPM is generally 800-1100 RPM, ensuring durability and reducing heat during operation.

7. Pump Material:

Cast iron construction for durability, especially for the cylinder and crankshaft.

Oil-lubricated for longevity.

8. Cooling:

Intercooler between stages to cool the air between compressions, enhancing efficiency.

Some models may have a finned design for better heat dissipation.

9. Flywheel:

Balanced flywheel to reduce vibrations and improve efficiency.

10. Lubrication:

Splash lubrication or forced lubrication system to ensure the longevity of the moving parts.

11. Air Filters:

Heavy-duty intake air filters to keep contaminants out of the cylinders.

12. Valves:

High-flow valves to ensure efficient air intake and discharge. . For more info visit us at http://www.seenucompressors.com/latest-update/for-a-5-0-hp-two-stage-recipro/11?utm_source=facebookpage

The specifications for a 2.0 HP reciprocating air compressor with a 3.0HP Three phase Seenu motor and a tank capacity of...
16/09/2024

The specifications for a 2.0 HP reciprocating air compressor with a 3.0HP Three phase Seenu motor and a tank capacity of 160 liters (with a GC starter) would typically include the following details:

General Specifications:

1. Motor Power: 3.0 HP (Horsepower)

2. Motor Type: Three-phase (for more balanced power and efficient operation)

3. Motor Brand: SEENU

4. Tank Capacity: 160 liters (suitable for medium-scale industrial or workshop applications)

5. Compressor Type: Reciprocating air compressor (uses pistons driven by a crankshaft for air compression)

Additional Features:

1. Operating Pressure: Likely ranges between 7-10 bar (typically around 10 bar for this size)

2. Air Delivery (CFM): Around 7-9 CFM (Cubic Feet per Minute) at the given pressure range

3. Voltage: 415V (common for three-phase systems)

4. GC Starter (Thermal Magnetic Starter): Helps in overload and short-circuit protection, commonly used in motors for protection.

5. Cooling Type: Air-cooled, as is typical for reciprocating compressors

6. Lubrication Type: Oil-lubricated (for smoother operation and longevity of parts)

7. Dimensions: Will vary based on manufacturer design

8. Weight: Likely around 100-150 kg depending on additional features
For more info visit us at http://www.seenucompressors.com/latest-update/the-specifications-for-a-2-0-h/9?utm_source=facebookpage

The specifications for a 5.0 HP Two stages reciprocating air compressor with a 5.0 HP Dharani motor and a tank capacity ...
09/09/2024

The specifications for a 5.0 HP Two stages reciprocating air compressor with a 5.0 HP Dharani motor and a tank capacity of 300 liters (with a L& T starter) would typically include the following details:

General Specifications:

1. Motor Power: 5.0 HP (Horsepower)

2. Motor Type: Three-phase (for more balanced power and efficient operation)

3. Motor Brand: Dharani

4. Tank Capacity: 300 liters (suitable for medium-scale industrial or workshop applications)

5. Compressor Type: Reciprocating air compressor (uses pistons driven by a crankshaft for air compression)

Additional Features:

1. Operating Pressure: Likely ranges between 8-12 bar

2. Air Delivery (CFM): Around 15CFM (Cubic Feet per Minute) at the given pressure range

3. Voltage: 415V (common for three-phase systems)

4. L& T Starter (Thermal Magnetic Starter): Helps in overload and short-circuit protection, commonly used in motors for protection.

5. Cooling Type: Air-cooled, as is typical for reciprocating compressors

6. Lubrication Type: Oil-lubricated (for smoother operation and longevity of parts)

7. Dimensions: Will vary based on manufacturer design

8. Weight: Likely around 200 to 250 kg depending on additional features
For more info visit us at http://www.seenucompressors.com/latest-update/the-specifications-for-a-5-0-h/6?utm_source=facebookpage

Address

Coimbatore
641006

Opening Hours

Monday 9am - 9pm
Tuesday 9am - 9pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm

Telephone

+919790015149

Website

Alerts

Be the first to know and let us send you an email when Seenu industries posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Seenu industries:

Shortcuts

Share

Category