Tipo Heat Exchangers

19/02/2026

Immersion coil Heat exchanger

04/02/2026

04/02/2026

Ev***rative condenser coil fabrication for export

26/08/2023

FRP Bottle Shape Cooling Towers The Round Shape FRP (Fiber glass Reinforced Plastic) Cooling Towers also called as Bottle Shape Cooling Towers . The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The Cooling Towers consists of Honey comb PVC fil...

06/05/2021

steam air heaters consist of a row of tubes in a casing or duct. The steam is passed through the tubes and any air or gas that moves over the tubes is heated.
Steam enters the heat exchanger shell through the top v***r opening and surrounds the outside of the tubes. As energy is transferred through the tubes it heats
the water inside the tubes. The heat transfer condenses steam inside the shell forming condensate that drops to the bottom of the heat exchanger shell

06/05/2021

Air preheater
An air preheater is any device designed to heat air before another process (for example, combustion in a boiler With the primary objective of increasing the thermal efficiency of the process. They may be used alone or to replace a recuperative heat system or to replace a steam coil.

The purpose of the air preheater is to recover the heat from the boiler flue gas which increases the thermal efficiency of the boiler by reducing the useful heat lost in the flue gas. As a consequence, the flue gases are also conveyed to the flue gas stack (or chimney) at a lower temperature, allowing simplified design of the conveyance system and the flue gas stack. It also allows control over the temperature of gases leaving the stack (to meet emissions regulations, for example). It is installed between the economizer and chimney.

Air preheater An air preheater is any device designed to heat air before another process (for example, combustion in a boiler With the primary objective of increasing the thermal efficiency of the process. They may be used alone or to replace a recuperative heat system or to replace a steam coil. Th...

06/05/2021

Materials Of Construction OF FIN TUBE HEAT EXCHANGER
TUBE MATERIAL
Carbon Steel, Stainless Steel,
Admiralty brass,
Copper and Exotic Alloys,
Seamless, and Welded Stainless Steels,
Seamless, and Welded, 2205 Duplex,
Copper Nickel,
Admiralty Brass,
Titanium.
Fin Materials: We use mostly Aluminum Fins and Copper Wire Fins for Specific Applications.

06/05/2021

FIN TUBE HEAT EXCHANGER APPLICATION.

Heat Recovery
Oven Heat Recovery
Boiler Flue Economizers
Combustion Air Pre-heating
Catalytic Oxidizers
Process air cooling
Indirect process air heaters
Thermal oxidizers
Spray Dryers
Gas Cooling / Condensing

FIN TUBE HEAT EXCHANGER APPLICATION. Heat Recovery Oven Heat Recovery Boiler Flue Economisers Combustion Air Pre-heating Catalytic Oxidisers Process air cooling Indirect process air heaters Thermal oxidisers Spray Dryers Gas Cooling / Condensing Materials: Tubes : Steel, Stainless steel or Duplex al...

06/05/2021

Finned tube heat exchangers are characterized by the radial or longitudinal 'fins' located on the outside of the tubes. The tubes carry a fluid which is the "service" to be heated up or cooled down. On the outside of the tubes there is typically air or can be some other fluid.

Advantage of the finned tubes
The fins on the outside of the tubes result in an incredible increase in the outer surface area of the tubes. This increase in the heat transfer surface area is the single most important feature of this design.
Increase outer surface area is more useful when we need some enhancement on the heat transfer rate on the outer side of the tubes.

When to use finned tube heat exchangers
Such scenarios can occur when you are using air to cool down or heat up a process fluid in the tubes. Air can have significantly smaller 'heat transfer coefficient' than the liquid inside the tubes. That is when you may opt for a finned tube heat exchanger over a shell and tube exchanger.

04/05/2021

Copper Tube Heat Exchanger

We are professionals in the manufacture of optimum quality of copper tube bundle by employing excellence guaranteed raw materials. Made from quality raw materials, these are passed through a thorough inspection to ensure the highest finish, dimensional accuracy, and toughness. These are extensively used in numerous industries as they are modified as per the specifications of our customers.

COPPER TUBE HEAT EXCHANGER Copper Tube Bundle We are professionals in the manufacture of optimum quality of copper tube bundle by employing excellence guaranteed raw materials. Made from quality raw materials, these are passed through a thorough inspection to ensure the highest finish, dimensional a...

04/05/2021

Shell and Tube Heat Exchangers offer large surface area in combination with efficient heat transfer and compactness. These are widely used in industries for various duties like cooling, heating, condensation, ev***ration etc. Tipo Heat Exchangers are the pioneers in the field of glass shell and tube heat exchangers in India and their product has a wide market acceptability. It is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. As its name implies, this type of heat exchanger consists of a shell (a large pressure vessel) with a bundle of tubes inside it.

Shell and tube Heat Exchangers have the ability to transfer large amounts of heat in relatively low cost, servicable designs. They can provide large amounts of effective tube surface while minimizing the requirements of floor space, liquid volume and weight.These Heat Exchangers are available in a wide range of sizes.The thermal technologies and manufacturing methods are well defined and applied by modern competitive manufacturers.Tube surfaces from standard to exotic metals with plain or enhanced surface characteristics are widely available. They can help provide the least costly mechanical design for the flows, liquids and temperatures involved.

Shell and Tube Heat Exchangers offer large surface area in combination with efficient heat transfer and compactness. These are widely used in industries for various duties like cooling, heating, condensation, ev***ration etc. Tipo Heat Exchangers are the pioneers in the field of glass shell and tube...

04/05/2021

Water Cooled Condenser
They operate at better efficiencies. Overall a water-cooled condenser unit will typically consume far less overall energy, which can lead to savings on energy costs and consumption.
Extended lifespan. Because of the efficiency of the medium, and the lack of weather-exposed parts, a water-cooled system will typically last years longer, assuming maintenance is not neglected.
Can operate better at higher temperatures. Industries such as manufacture may find that water-chilled systems operate more effectively in high-temp areas.

Water Cooled Condenser They operate at better efficiencies. Overall a water-cooled condenser unit will typically consume far less overall energy, which can lead to savings on energy costs and consumption. Extended lifespan. Because of the efficiency of the medium, and the lack of weather-exposed par...