18/04/2022
CONSTRUCTION WORK
& Architectural Design
LUXURY HOME DECOR & INTERIOR DESIGN
Call us +91-7669197949,+91-8449197949
Email ID :- [email protected] SAAVI INFRA CONSTRUCTION
Our rate for full work starts from Rs. 1200 per square feet & may go upto Rs. 2000 depending on your site location, Plinth Area, Elevation Designs & Roofing Pattern.
full work contract rate per square feet would get fixed between this range of Rs. 1200 - Rs. 2000 depending on your location, plinth area, Elevation & the roofing pattern you choose to construct your home and therefore the full & final rate per square feet can only be confirmed after you finalize on the floor plan and the Elevation Design of your proposed home. Please refer to the extra charge our exciting offers on your dreams home designing.
Work Excavation :- Foundation trenches, for all clauses of soil including cutting, shoring, strutting, dewatering, etc
Column foundation - 120 x 120 x 120 cm in size
Rubble foundation - 60 x 60 cm in size
# PCC Below Column Foundation - Plain cement concrete 1:4:8 using 20MM downgraded aggregates as per standard structural and architectural specification.
# RCC Column Footing - Providing & laying controlled reinforced cement concrete as per standard structural and architectural specification using 20MM downsized aggregates at any depth or heights including all formworks, centering, shuttering, scaffolding, compacting with vi*****rs, curing & hacking the exposed surfaces wherever required. Concrete mix shall be of M20 (1:1.5:3) grades.
# RR Foundation Work - 60cm x 60cm fitting and packing of rubble with available soil.
# RR Basement - 50cm x 45cm fitting and packing of rubble in cement mortar 1:6 as per standard structural and architectural specification.
# RCC Belt - Providing & laying controlled reinforced cement concrete as per standard structural and architectural specification using 20MM downsized aggregates at any depth or heights including all formworks, centering, shuttering, compacting, with vi*****rs, curing & hacking the exposed surfaces wherever required. Concrete mix shall be of M20 (1:1.5:3) grade. Belt size shall be 45cms x 10cms as per standard architectural specification.
# Filling In Basement - Filling in basement shall be done with red earth or slurry dust. All filling shall be watered and well compacted.
# Solid Block Works Or Laterate masonry in 20cm thick, cement in 1:6
Note :- Option to upgrade to good quality semi wire-cut red brick instead of solid blocks or Laterate; Rs.60/- extra per Sq. Ft
# RCC Columns - Providing & laying controlled reinforced cement concrete as per standard structural and architectural specification using 20MM downsized aggregates at any depth or heights including all formworks, centering, shuttering, scaffolding, compacting with vi*****rs, curing & hacking the exposed surfaces wherever required. Concrete mix shall be of M20 (1:1.5:3) grade.
# RCC Lintel - Providing & laying controlled reinforced cement concrete as per standard structural and architectural specification using 20MM downsized aggregates at any depth or heights including all formworks, centering, shuttering, scaffoldingą„¤compacting with vi*****rs, curing & hacking the exposed surfaces wherever required. Concrete mix shall be of M20 (1:1.5:3) grade.
# RCC Sun Shades - Providing & laying controlled reinforced cement concrete as per standard structural and architectural specification using 20MM downsized aggregates at any depth or heights including all formworks, centering, shuttering, scaffolding, compacting with vi*****rs, curing & hacking the exposed surfaces wherever required. Concrete mix shall be of M20 (1:1.5:3) grade.
# RCC Stairs - Providing & laying controlled reinforced cement concrete as per standard structural and architectural specification using 20MM downsized aggregates at any depth or heights including all formworks, centering, shuttering, scaffolding, compacting with vi*****rs, curing & hacking the exposed surfaces wherever required. Concrete mix shall be of M20 (1:1.5:3) grade.
# RCC Beams - Providing & laying controlled reinforced cement concrete as per standard structural and architectural specification using 20MM downsized aggregates at any depth or heights including all formworks, centering, shuttering, scaffolding, compacting with vi*****rs, curing & hacking the exposed surfaces wherever required. Concrete mix shall be of M20 (1:1.5:3) grade. Concrete pouring shall be machine mixed and mechanically vibrated.
# RCC Slabs - Providing & laying controlled reinforced cement concrete as per standard structural and architectural specification using 20MM downsized aggregates at any depth or heights including all formworks, centering, shuttering, scaffolding, compacting with vi*****rs, curing & hacking the exposed surfaces wherever required. Concrete mix shall be of M20 (1:1.5:3) grade. Concrete pouring shall be machine mixed and mechanically vibrated.
# Parapet Work - Single brick work shall be used for the parapet work. SAAVI INFRA CONSTRUCTION: # PCC Below Flooring - Plain cement concrete 1:4:8 using 20MM downgraded aggregates as per standard structural and architectural specification.
# Reinforced steel - Fixing steel reinforced (High Yield Strength Deformed Bars Conforming to Fe 500) for RCC in all items, work including transporting, recoiling, cutting, straightening, bending and placing in position at all levels & binding with approved gauge binding wire.
Cement - 43 graded ordinary portland cement or portland pozzolana cement of altra tec, ambhujha and Birla etc or equivalent shall be used for all the works.
# Sand - Good quality crushed M-sand shall be used for all RCC and super structural works, Good quality river sand or crushed M-sand which is specially graded for the plastering purpose shall be used for all plastering works as per the availability in the open Market.
# Ceiling plastering work - ceiling plastering work shall be in 1:3 cement mortar, below 10MM thick
# Inside plastering work - inside plastering work shall be in cement mortar 1:6, 9 to 12MM thick.
SAAVI INFRA CONSTRUCTION: # Outside Plastering work - Outside wall plastering work shall be in cement mortar 1:5, 12 to 15 MM thick.
# Anti - termite treatment - Against attack by subterranean termites; chemical treatment shall be implemented by experts having special know-how to ensure uniform distribution and proper pe*******on.
# Joinery & Electrical Conduit Works- To execute the Joinery works; the entire window frames (with Bars & Rods) and door frames should be provided by the client at site. But if the client opts for the same to be supplied by T. F. C; then we charge about Rs. 110/- to Rs. 140/- extra per Sq.Ft for good quality imported hard wood.
Before we executing the plastering works; all the electrical conduit works must be fulfilled by the client's electrician. But if the client opts for the same to be done by T. F. C; then additional charges has to be paid.
