Paridhi International

16/06/2024

https://rb.gy/0hmyln

Using hazardous & carcinogenic Trichloroethylene (TCE) for your metal cleaning and degreasing needs? It's time for a safer, greener, and more efficient alternative.
Introducing ALSTACLEAN VD30 for solvent based industrial cleaning requirements!
✅ Non-Carcinogenic & Eco-Friendly: Unlike TCE, VD30 is non-carcinogenic and poses no harm to the environment.

✅ Unmatched Efficiency: Achieve 40% higher cleaning efficacy compared to TCE, for v***r degreasing, ultrasonic cleaning, and dip & dunk methods.

✅ Versatile Application: Suitable for cleaning a wide range of metals for automotive components, heavy engineering, heat treatment, and more.

✅ Safety & Compliance: No ozone depletion potential and zero global warming impact. Fully RoHS compliant and certified by IIT Guwahati. 🚫🌿

hashtag hashtag hashtag hashtag

05/05/2023

Coating of Internal Water Pump - with TS256 & TS476. To Prevent Current and Future Corrosion Issues and Restrengthen and Replace metal loss due to Erosion.

Contact Us: 9737999933, [email protected]

04/05/2023

Pipe Restrengthening.
Pipe Leakage, Patching work. (Steel Putty + Fiberglass + Ceramic)

Contact US: 9737999933, [email protected]

➡️

03/05/2023

Push your machine to its limit with our ALUFLASH™ end mill. This aluminum-machining monster will remove countless chips with less passes in roughing and finishing operations. Check out all of its benefits for your shop.

Contact US @ 9737999933, [email protected]

02/05/2023

Our KenTIP™ FS modular drill delivered high performance, cost savings and productivity improvement for one of our customers in India that specializes in manufacturing automotive parts. When utitlized for a drilling application in CNC lathes, the KenTIP FS modular drill:

✔️ Decreased spindle load by nearly 25%
✔️ Reduced cost per component by more than 20%
✔️ Increased tool life by approximately 10%

See Other Benifits:
1. This modular drilling system covers a 6–26mm diameter range.
2. Up to 12xD drilling depths.
3. Applicable in steel, stainless steel, and cast iron.
4. Large, ultra-high polished chip flutes guarantee hassle-free chip evacuation, enhancing tool life and performance.
4. Taper interface uniquely designed for highest rigidity clamping.
5. Retention lock prevents insert pullout.
6. Large bearing surface positioned for transmission of highest torsional loads without pocket deformation.
7. Large face contact surface.
8. Coolant delivery to the drill point and to the rake for guaranteed coolant devlivery where it is needed.

01/05/2023

Achieve advanced levels of adaptability, accuracy, and reliability with our first comprehensive micro-drilling portfolio.
Micro with diameters starting from 1.0mm and length offerings from 2xD to 50xD—each featuring a powerful coolant supply.
Contact US: 9737999933, [email protected]

30/04/2023

Benefits of Jokisch Tano DGY water-soluble cutting fluids

1. Reduced forces on the tool and thus, economic efficiency in power consumption.
2. Increased tool life by cooling the cutting edge.
3. Better finish on the workplace
4. Minimised tool-chip friction by providing a lubricant between chip and tool.
5. Improved lubricant machine movements.
6. Decreased tendency to form ‘built-up edge’.
7. Reduced distortion caused by heat generation, thereby maintaining dimensional accuracy.
8. Limited corrosion of newly machined surfaces.
9. Lubrication to guiding tooling portions, including drills or piloting in a brush.
Contact US: 97379 99933, [email protected].

11/04/2023

Let your metal parts sleep tight with SMARTY PAK™ VCI + Desiccant. Remove moisture AND actively prevent rust from forming.
Check it out: http://surl.li/ghcgy
Contact US: 97379 99933, [email protected]

10/03/2023

Sliding head tooling with no limitations – we offer you the right solution for every application!
Take advantage of the entire range of our tool portfolio especially for sliding head turning, perfectly tailored to specific needs, matched, and tailored to the market. Also, benefit from the high availability of these tools as well as the fast delivery and our machining expertise.

New catalog with all products available now on:
▶️

This catalogue gives you a good overview of the entire range of our tool portfolio especially for sliding head turning, perfectly tailored to specific needs, matched and tailored to the market.

04/03/2023

For the production of internal threads, tapping is still the most efficient process. Our comprehensive complete program for the production of threads offers a suitable precision tool for every material and for every machining task:

BASIC Line: test the unbeatable price-quality ratio!
TOP Line: High-performance taps for highest demands on tool life
TG 100 GG: The specialist for the machining of cast materials
TG 300 T: The high-performance tap for the machining of cast materials
Fluteless taps
Available as per DIN, JIS, and Custom Standards.
Avail at: Paridhi International 97379 99933.

22/02/2023

International Anti-Rust #77-C is a solvent-based, barium-free, rust and corrosion preventative containing efficient organic corrosion inhibitors and water-displacing agents. It is highly recommended for protecting bright or polished steel surfaces due to its inherent non-staining properties.

International Anti-Rust #77-C may be applied by immersion, brush, swab or spray equipment. The residual coating is readily removed by alkaline metal cleaning solutions or by solvent degreasing

Barium-Free
Non-Staining
Residual Film is Compatible with Engine Oil
Effective Protection in Acidic Atmospheres
Effective Protection During Brief Periods of Outdoor Exposure
Suppresses Fingerprint Corrosion
Suppresses Oxidation of Aluminum

Approved by: Cummins, Schaeffler Group, Cat, and more