The MEP Vibe

Directions Website

The MEP Vibe οΏ½ Industry trends, smart building tech, and MEP design

Iso audit checklist
05/11/2026

Iso audit checklist

WHY IS LIQUID FILLED INSIDE A PRESSURE GAUGE?
05/11/2026

WHY IS LIQUID FILLED INSIDE A PRESSURE GAUGE?

Same centrifugal pump. Same RPM. Only the outlet valve position changes.A: Fully open B: Partly closedWhich needs more s...
05/11/2026

Same centrifugal pump. Same RPM. Only the outlet valve position changes.

A: Fully open B: Partly closed

Which needs more shaft powerβ€”and why? πŸ‘‡

Assume its power curve rises with flow across the permitted operating range shown.

How much distance required as per NFPA Norms ❓❓
05/11/2026

How much distance required as per NFPA Norms ❓❓

Types of          :A plate heat exchanger is sized by calculating the required heat-transfer area and then determining t...
05/11/2026

Types of :

A plate heat exchanger is sized by calculating the required heat-transfer area and then determining the approximate number of plates needed. The calculation mainly depends on heat duty, overall heat-transfer coefficient and temperature difference.

1. Heat duty: The required heat transfer rate (Q) represents the amount of thermal energy that must be transferred between the hot and cold fluids.

Uses: It is the starting point for determining the required exchanger size.

2. Temperature difference: Calculate the temperature differences between the hot and cold streams at both ends of the heat exchanger.

        SAVE THIS!  you   how to calculate the range of a cooling tower?Cooling tower range helps HVAC engineers evaluat...
05/11/2026

SAVE THIS!

you how to calculate the range of a cooling tower?

Cooling tower range helps HVAC engineers evaluate the temperature drop of circulating water as it passes through the cooling tower.

1. COOLING TOWER RANGE FORMULA

Range = Hot Water Inlet Temperature - Cold Water Outlet Temperature

Where:

Hot water inlet = Water entering the cooling tower from the condenser

Cold water outlet = Water leaving the cooling tower toward the condenser

How can two fluid exchange without mixing
05/11/2026

How can two fluid exchange without mixing

05/11/2026

AHU working Method β€ΌοΈβœ…

If you solve this, your IQ level is above average.Can you solve it?
05/11/2026

If you solve this, your IQ level is above average.

Can you solve it?

  &    A clamp meter is an electrical testing instrument used to measure current without disconnecting the conductor. Ma...
05/11/2026

&

A clamp meter is an electrical testing instrument used to measure current without disconnecting the conductor. Many models can also measure voltage, resistance, continuity, and other electrical parameters.

1. AC Current: Measures current by clamping around a single conductor.

2. Voltage Measurement: Measures AC/DC voltage using test probes on compatible models.

β—† 3. Resistance: Checks resistance in de-energized circuits.

4. Continuity Test: Checks whether a circuit has a continuous electrical path.

5. HVAC Applications: Checks current drawn by motors, pumps, AHUs, fans, and compressors.

6. Electrical Panels: Helps inspect load current and identify possible phase-current imbalance.

:

Address

Madhubani

Alerts

Be the first to know and let us send you an email when The MEP Vibe posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share