Kanipura Designers

Kanipura Designers * Structural Design
* Steel Design
* Architectural Design
* PMC
* Estimation and valuation
* Co

01/04/2026

How to fix a screw in Porotherm blocks (WITHOUT breaking them!)

• Step 1: NO Hammer Drill! Always switch your drill to “Rotary” mode only. Hammering shatters the hollow webs.

• Step 2: Drill Slowly & Steadily. Use a good quality masonry bit and let the drill do the work.

• Step 3: The Magic Secret: Special Plugs. Standard plugs fail here! Use specialized hollow-wall anchors

• Step 4: Tap Gently. Push the anchor in until it’s perfectly flush with the wall.

• Step 5: Drive the Screw. Secure your fixture tight! The plug will knot up safely behind the hollow gaps.in

27/01/2026

1.When your column reinforcement starts looking more like “orange dust” than “structural steel,” you need more than just a quick fix. Enter Fosroc’s anti-corrosive solutions—the industry standard for stopping rust in its tracks.

2.Don’t let rust compromise your structure! 🛑 We’re using Fosroc’s anti-corrosive primer to treat these rusted column rebars. It’s not just about covering the rust; it’s about preventing future oxidation and ensuring the building’s longevity. Strong steel = Safe home.

3.We use Fosroc because it provides electrochemical protection. It’s like a bodyguard for your steel rebars.

4.Ignoring rusted reinforcement leads to “Concrete Spalling”—one of the most expensive repairs in construction. We’re applying Fosroc Nitoprime now to stop the rot before the concrete goes on.
It’s much cheaper to protect your steel today than to replace a column tomorrow. Invest in quality chemicals. Invest in Fosroc.

🛠️ The “Step-by-Step” Guide
• Step 1: “Clean to bare metal 🧽”
• Step 2: “Remove all loose flakes 🛠️”
• Step 3: “Apply Fosroc Nitoprime Zincrich 🖌️”
• Step 4: “Active protection activated! ⚡”

25/01/2026

Porotherm blocks are “planed” (ground flat) to perfection, allowing them to sit flush with just a 1mm bed of adhesive.
• Dry Fix Adhesive: A specialized foam-based glue that replaces traditional sand-and-cement mortar.
• Sustainability: Drastically reduces water consumption on-site—perfect for green building certifications.
• Thermal Efficiency: Because there are no thick mortar joints, “thermal bridging” is eliminated, keeping the building cooler in summer and warmer in winter.

Consulting Engineer :

Commercial Building at Bailoor Structural Consultant:
28/06/2025

Commercial Building at Bailoor
Structural Consultant:

Residential Building at Kasaragod Structural Designer:
25/03/2023

Residential Building at Kasaragod

Structural Designer:

Project: Proposed Construction of Residential Building for Mrs. Pushpalatha Rao Structural Designer:
21/03/2023

Project: Proposed Construction of Residential Building for Mrs. Pushpalatha Rao
Structural Designer:

Project: Proposed Construction of Residential Building at Kulshekar Mangalore Structural Designer:
20/03/2023

Project: Proposed Construction of Residential Building at Kulshekar Mangalore
Structural Designer:

Project: Proposed Construction of Residential Building at Mangalore Consulting Engineer:
17/03/2023

Project: Proposed Construction of Residential Building at Mangalore

Consulting Engineer:

Project: Proposed Design of School Building Architecture and Structural Designer: Kanipura Designers
16/09/2021

Project: Proposed Design of School Building

Architecture and Structural Designer: Kanipura Designers


Address

'110' INLAND ORNATE. OPP. OCEAN PEARL. NAVABHARATH Circle
Mangalur
575003

Opening Hours

Monday 9am - 7:30pm
Tuesday 9am - 7:30pm
Wednesday 9am - 7:30pm
Thursday 9am - 7:30pm
Friday 9am - 7:30pm
Saturday 9am - 5:30pm

Telephone

+919980269800

Website

Alerts

Be the first to know and let us send you an email when Kanipura Designers posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Kanipura Designers:

Shortcuts

Share

Category