Agarwalla Buildcon

27/05/2026

🔵 Most cone crushers in India are still running on bronze bushings and manual CSS adjustment. Here is why that is costing quarry operators more than they realise.

At Agarwalla Crushers, we have been manufacturing crushing equipment since 1955. The single most common feedback we receive from quarry operators who switch to our cone crusher is this:

"I didn't realise how much downtime I was accepting as normal."

Manual CSS adjustment means stopping the plant, releasing pressure, physically adjusting the setting, restarting — every time your required product size changes. Hydraulic CSS adjustment means changing your product size while the crusher is running under full load. No stoppage. No delay. No production loss.

That single feature alone changes the economics of your crushing circuit.

Introducing the Agarwalla Cone Crusher — AC Series.

⚙️ HYDRAULIC CSS ADJUSTMENT
Change product size under full load. Instantly. Without stopping your plant.

🔩 ROLLER BEARING DESIGN
Precision roller bearings replace older bronze bushing systems. Lower friction. Higher efficiency. Longer service life. Less lubrication maintenance.

🏗️ LIVE FRAME SPRING MOUNTING
The entire crusher is spring-isolated from its foundation. Dynamic loads stay inside the machine — your civils and substructure are protected.

⚡ STARTER PANEL INCLUDED AS STANDARD
Fully wired, factory-tested starter panel supplied with every machine. Connect power. Start production.

🪨 ALL AGGREGATE SIZES FROM ONE MACHINE
40mm / 20mm / 12mm / 6mm — adjust CSS to produce what your customer needs.

AVAILABLE CAPACITIES:
✅ 150 TPH | ✅ 200 TPH | ✅ 250 TPH | ✅ 300 TPH

Standard head (secondary crushing) and short head (tertiary / fine crushing) configurations available.

Suitable for: granite, basalt, quartzite, limestone, river boulders, dolomite — all rock types used in Indian infrastructure projects.

If you are evaluating cone crushers for your secondary or tertiary crushing circuit — we would be glad to send you a full technical datasheet and a quote.

📍 M/s BPA Engineering Equipments Pvt. Ltd. (Agarwalla Crushers)
📍 Pakur, Jharkhand, India | Est. 1955
📞 +91 9973815757 / +91 9955972456
✉️ [email protected]
🌐 www.agarwalla.com

20/05/2026

🏔️ Agarwalla Crushing Plant — Live and running in Nagaland, Northeast India.

From our factory in Pakur, Jharkhand — to the mountains of Nagaland. This is what "Built for Performance. Engineered for Reliability." looks like in the field.

Watching a plant you designed and manufactured running at full capacity at a customer's site — crushing hard rock in one of the most challenging terrains in India — is what 68 years of engineering experience is built for.

🪨 Plant details:
📍 Location: Nagaland, Northeast India
⚙️ Capacity: 100 TPH
🔩 Configuration: Primary Jaw Crusher + Secondary Jaw Crusher + Screen / Full circuit

🏗️ Manufactured & commissioned by: Agarwalla Crushers

Northeast India is booming with infrastructure development — roads, bridges, tunnels, highways under PMGSY, BRO and state PWD programmes. Aggregate demand has never been higher. Agarwalla plants are running across Jharkhand, Chhattisgarh, West Bengal, Sikkim, and now Nagaland — delivering consistent, quality aggregate to fuel that growth.

If you are setting up a crushing plant anywhere in Northeast India and want a manufacturer who actually delivers, installs and commissions in your region — talk to us.

📍 M/s BPA Engineering Equipments Pvt. Ltd. (Agarwalla Crushers)
📍 Pakur, Jharkhand, India | Est. 1955
📞 +91 9973815757 / +91 9955972456
✉️ [email protected]
🌐 www.agarwalla.com

19/05/2026

⚙️ That ₹10,000 spare part you skipped? It just cost your plant ₹1,00,000 in downtime.
We see it happen again and again across quarries in India. A plant operator chooses the cheaper jaw plate, the lower-grade bearing, the "jugaad" toggle plate — and three weeks later the crusher is down, the production schedule is blown, and the emergency repair bill is ten times what the quality part would have cost.
Crusher spare parts are not a cost. They are an investment in your plant's uptime.
Here is what the difference looks like in practice:
❌ LOW-QUALITY PARTS:
→ Frequent replacements increase total cost per tonne
→ Accelerated wear damages main components (eccentric shaft, pitman, frame)
→ Unplanned downtime destroys your delivery commitments
✅ WHAT SMART PLANT OPERATORS DO:
→ Maintain a critical spare stock: jaw plates, liners, bearings always on shelf
→ Choose quality over cheapest — track cost per tonne, not cost per part
→ Plan replacements before failure — not after the crusher stops
→ Monitor wear life vs output — replace at 70% wear, not at 100% failure
💡 THE REALITY CHECK:
A cheap spare part may save you ₹10,000 today.
But it can cost you ₹1,00,000+ in downtime tomorrow.
Crusher efficiency is not just about machine design or installed capacity.
It is about how well you manage your spares.
Save this post. Share it with your plant supervisor and maintenance team.
📍 Agarwalla Crushers — Built for Performance. Engineered for Reliability.
🏭 M/s BPA Engineering Equipments Pvt. Ltd. | Est. 1955 | Pakur, Jharkhand
📞 +91 9973815757 / +91 9955972456
🌐 www.agarwalla.com | ✉ [email protected]

17/05/2026

🪨 Are your screens producing inconsistent aggregate sizes? The problem is almost always one of these 7 things.

Most crusher plant operators focus entirely on the jaw crusher — and ignore the screening section. But a poorly set screen costs you more in rework, oversize rejection and lost TPH than almost any other mistake in the plant.

We've put together 7 Basic Screening Concepts that every crusher plant operator, supervisor and plant owner must know:

✅ 01 — Deck Selection: match decks to your output gradations
✅ 02 — Screen Media: wire mesh vs rubber vs perforated sheet
✅ 03 — Blinding: why throughput drops and how to fix it
✅ 04 — Stroke & RPM: the balance that most operators get wrong
✅ 05 — Inclination Angle: efficiency vs capacity — you cannot have both at maximum
✅ 06 — Screening Efficiency: target 90–95% — never sacrifice this for raw TPH
✅ 07 — Maintenance: a well-maintained screen outlasts a neglected one 3×

Save this post. Share it with your plant supervisor and operators. It could save you lakhs in unnecessary downtime and rework.

📍 Agarwalla Crushers — Built for Performance. Engineered for India.
🏭 M/s BPA Engineering Equipments Pvt. Ltd. | Est. 1955 | Pakur, Jharkhand
📞 +91 9973815757 / +91 9955972456
🌐 www.agarwalla.com | ✉ [email protected]

14/05/2026

12/05/2026

Built for performance. Engineered for reliability.
Ready to power the next generation of infrastructure and mining projects.

⚙ Robust Jaw Crushing Solution
⚙ Heavy Duty Construction
⚙ Designed for Continuous Operation
━━━━━━━━━━━━━━━
🏭 Manufactured By:

M/s BPA Engineering Equipments Pvt. Ltd.
(Agarwalla Crushers)
📍 Pakur, Jharkhand, India
📞 +91 9973815757 / 9955972456
🌐 www.agarwalla.com
━━━━━━━━━━━━━━━

11/05/2026

On the move to Central India 🔥

Dispatch of 100 TPH Crusher Plant machinery for an upcoming project in Chhattisgarh / Madhya Pradesh.

Every machine leaving our factory carries:
✔ Strength
✔ Precision
✔ Performance
✔ Agarwalla Trust

From manufacturing to site ex*****on — we deliver solutions built for the toughest applications.

By Agarwalla Crushers 🇮🇳

🏭 Manufactured By:

M/s BPA Engineering Equipments Pvt. Ltd.
(Agarwalla Crushers)

📍 Pakur, Jharkhand, India
📞 +91 9973815757 / 9955972456
🌐 www.agarwalla.com

11/05/2026

https://whatsapp.com/channel/0029VbCaBQk1yT20rNgJIH0n

Follow Agarwalla Crushing Solutions's WhatsApp Channel. India’s trusted manufacturer of Crushing & Screening Plants.
Jaw Crushers | Cone Crushers | Screens | Conveyors | Turnkey Solutions
Manufactured by Agarwalla Crushers. Join 81 followers for the latest updates.