Major Electricals.

08/08/2026

Three motor-rewinding quotations may look similar.

They are not.

One scope may include:

• core inspection
• rotor testing
• new insulation system
• VPI
• shaft and housing checks
• dynamic balancing
• electrical tests
• no-load trial and documentation

Another may include only copper, varnish and painting.

The difference is usually invisible on dispatch day.

It appears months later as heating, vibration, lower reliability or repeat failure.

For critical motors, do not compare only the final rate.

Compare the scope.
Compare the process.
Compare the test records.
Compare the warranty.

The cheapest quotation can become the most expensive repair.

07/08/2026

Rewinding is not replacing burnt copper.

A quality rewind begins before the old coils are removed.

The workshop must:

• document the original winding data
• identify the cause of failure
• inspect the stator core and rotor
• check the shaft, bearings and housings
• reproduce the coil geometry and insulation system
• control curing or VPI
• dynamically balance and electrically test the motor

If the root cause is not corrected, new copper only resets the countdown.

The motor may rotate again.

That does not mean reliability has been restored.

A rewind should return the motor with evidence, test results and a clear repair history—not only fresh paint.

06/05/2026

05/05/2026

Ready for dispatch completely rewound stator of 600 KW/ 800 HP, 6.6 KV motor.