Cybernetik

Cybernetik Successfully delivering turnkey automation solutions since 1989. Cybernetik Technologies Pvt. Ltd. From 10 people operating in less than 100 sq.m.

Cybernetik is an industrial automation company that blends experience with innovation to design, build, and install automation solutions that help manufacturing companies improve their processes and output. (CTPL) is an Indian industrial automation company that blends experience with innovation to design, build, and install end-to-end, customized automation solutions for the food, pharmaceutical,

chemical, and manufacturing industries across the world. Headquartered in India with two design offices and four manufacturing plants, we provide automation and robotics solutions to tackle complex industrial challenges for a global clientele through innovation and advanced technologies. Cybernetik Technologies was set up as a consultancy in 1989 by a group of engineers from the Indian Institute of Technology (IIT)-Madras, India and the State University of New York at Buffalo, USA. workspace, our footprint in India has expanded to 30,000+ sq.m. across four units, two each in Pune, Maharashtra and Nadiad, Gujarat. Our global operations are based out of three international offices:
Vietnam (for Southeast Asia), Dubai (for Middle East and Africa) and United States (for North America).

20/08/2026

Thousands of times an hour. No pause, no wasted movement.

There is something about watching automation in action that holds your attention longer than you would expect.

Here are a few moments of our High-Speed EV Battery Cell Sorting System from the factory floor.

Cybernetik is hiring Mechanical and Service Engineers at our Unit 1 facility in Pune.We build automation for process and...
19/08/2026

Cybernetik is hiring Mechanical and Service Engineers at our Unit 1 facility in Pune.

We build automation for process and material handling across the pharma, food and chemical industries. The Mechanical Engineer role takes systems from drawings and component selection through trials, commissioning and handover. The Service Engineer roles install, commission and troubleshoot that equipment in the field, where it has to run reliably day after day.

What connects them is genuine ownership of real solutions, from powder handling, to pneumatic conveying, conveyors, silos, dust collection and more. We have openings for both experienced engineers and those early in their careers, so if you have a mechanical engineering background and want hands-on work with automation solutions installed worldwide, we would like to meet you.

To apply, email [email protected] or contact +91 80077 72549.

15/08/2026

A palletizing system that handles neat, rigid cartons has a relatively straightforward task. A bag of sand, cement or fine powder is a different problem altogether.

Filled bags are heavy, flexible and inconsistent. Their contents shift, their thickness varies from one bag to the next, and the material itself is often abrasive and dust-laden. Stacked as they arrive, they form an unstable pallet, one that leans, settles unevenly, or fails in transit. The difficulty is not the weight. It is that no two bags present the same shape.

The approach, therefore, is to make each bag consistent before it is stacked, aligning it and evening out its thickness so that every layer sits true and the finished pallet holds through handling and transport.

Palletizing a heavy or abrasive material at the end of your line? Contact our team to discuss end-of-line automation built around your product. Write to us at [email protected]

hashtag hashtag hashtag

A spice blend has to deliver the same flavor in every batch. That depends on holding an exact ratio of ingredients that ...
14/08/2026

A spice blend has to deliver the same flavor in every batch. That depends on holding an exact ratio of ingredients that behave nothing alike.

Spices differ in particle size, density and moisture, and those differences work against a uniform mix. Finer, lighter particles tend to separate from coarser, heavier ones during blending and handling, so a blend that looks even can still drift out of ratio. When it comes to micro-ingredient dosing, a small dosing error becomes a large one in proportion, which is exactly where flavor consistency breaks down.

Carryover between batches is usually treated as a cleaning problem. More often it is a design one. If a blender traps powder in dead zones or does not discharge fully, cleaning alone will not solve it. The dependable fix is equipment designed to empty and clean out completely, so a trace of one batch does not carry into the next.

Where does your blend lose consistency, in the mix or between batches? Let us know in the comments.

11/08/2026

Most processing lines are designed around the equipment. Food paste does not permit that approach.

Among the most demanding products to process, food paste is highly perishable, exacting in its hygiene requirements, and dependent on precise cooking to remain both safe and consistent. These constraints cannot be addressed after the fact. They determine how the entire line is designed, from the first stage to the last.

Is your process defined by constraints that allow little margin for error? Get in touch with us at [email protected] to discuss hygienic, precise food processing.

Sugar is one of the most familiar materials on a confectionery line. It is also one of the most hazardous, and it is rar...
08/08/2026

Sugar is one of the most familiar materials on a confectionery line. It is also one of the most hazardous, and it is rarely treated that way.

Ground into fine powder and suspended in air, it becomes combustible, and the hazard is present long before the air looks dusty enough to raise concern. The harder part is that the risk is not isolated to the mill. It carries through storage and packaging too, where an incident at any one stage can travel to the next.

That is why protecting each machine on its own falls short. Our Sugar Grinding System treats milling, storage and packaging as one integrated line, pairing dust-free handling that prevents airborne sugar with pressure-shock-resistant construction rated to 12 bar, within an ATEX-compliant design, and isolation between stages that stops any adverse event from spreading.

Handling combustible powder as part of your process? Let us know in the comments below.

In many industries, a small inaccuracy costs money. In pharmaceuticals, it can cost the entire batch, or even compromise...
06/08/2026

In many industries, a small inaccuracy costs money. In pharmaceuticals, it can cost the entire batch, or even compromise patient safety.

Batch size is part of the reason. A fixed error, or a trace of carryover from the previous product, is diluted across a fifty-ton batch. In a fifty-kilo batch, there is far less volume to absorb it, so the same deviation carries more weight. Many active ingredients are also potent and dosed in very small quantities, which makes the accuracy a line must hold more demanding than bulk production requires.

Verification differs as well. There is no large run to average across. Each batch is tested and released on its own record, so a single out-of-specification batch is rejected regardless of the batches before it. And every step must be documented thoroughly enough to prove what happened, not merely assert it.

Smaller batches also mean more frequent changeovers, and each changeover is a point where contamination or mix-up has to be engineered out rather than corrected afterward.

None of this is accuracy for its own sake. At pharmaceutical scale, it is what keeps a product safe and a batch releasable.

How does your line prove accuracy on every batch, rather than on average? Contact our team to discuss precision process automation for pharmaceuticals. Write to us at [email protected]

Ask which step in a food, pharmaceutical or chemical plant is the most critical, and cleaning is rarely the first answer...
04/08/2026

Ask which step in a food, pharmaceutical or chemical plant is the most critical, and cleaning is rarely the first answer. It belongs closer to the top than most people think.

Nothing about a cleaning cycle appears in the finished product. But what happens between batches, from the residue removed to the microbes killed, and even the traces of one product kept out of the next, is often what decides whether that product is safe to ship at all. Done by hand, that step is hard to repeat and harder to prove. That is exactly why it is worth automating.

We broke down why it matters. Swipe through for the full picture.

The fully automated, lights-out factory makes a compelling headline. What works on the ground is more selective. Automat...
31/07/2026

The fully automated, lights-out factory makes a compelling headline. What works on the ground is more selective.

Automate the task that is unsafe to do by hand. The one that has to be identical ten thousand times in a row. The single station that decides the throughput of the whole line. Then leave the judgment calls to the people who are good at them.

The newer tools follow the same logic. Vision inspection, in-line data, flexible robotic cells. They are not there to empty the floor. They remove the work that wears people down, catch the errors that are hard to see, and let skilled staff move to where they add more value.

The return rarely comes from switching off the lights. It comes from choosing the right few tasks to automate, and getting those genuinely right.

Where would automation actually help most on your line? Let us know in the comments.

Global scale is one of the most common claims in industrial automation. It is also one of the easiest to make and the ha...
28/07/2026

Global scale is one of the most common claims in industrial automation. It is also one of the easiest to make and the hardest to prove.

Most of the time it means a map. A list of countries, a spread of logos, a count of regions served. That is reach, and reach has value. But it is not the same as scale. The real test is quieter. When a line built on one continent has to run, and be supported, on another, does the standard hold?

That is the question we built the company around. Here is how we think about it.

Address

Gat No 365, Village Urawade, Mulshi Taluka
Pune
412108

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm

Telephone

+912067909600

Website

Alerts

Be the first to know and let us send you an email when Cybernetik posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Cybernetik:

Shortcuts

Share

Category