Sandvik Coromant INDIA

Sandvik Coromant INDIA Sandvik Coromant is the world’s leading supplier of tools, tooling solutions, and know-how to the metalworking industry. We love a challenge!

Welcome to the Sandvik Coromant Official page. This page is a forum for exchange of ideas and interesting dialogue. We encourage you to interact, share and discuss with us and others. Please note that you are personally responsible for your postings and you warrant that you will (a) not submit, post or upload files or material that contain intellectual property rights which are owned by a

ny third party or which are protected by rights of privacy or publicity of any third party without having received all necessary consents, and (b) not submit any material which is prohibited by any applicable data protection or privacy legislation. Comments, pictures, videos and other type of material posted by users on the Sandvik Coromant page ("User Content") are not necessarily representative of the opinions of Sandvik Coromant. Sandvik Coromant (a) does not confirm, represent or warrant the accuracy of any User Content posted on this page, (b) does not endorse any opinions expressed on this page, (c) is not responsible for any User Content on this page or content of external Internet sites nor any other sites linked to this page, and (d) shall not be liable for any loss or damage arising out of the use of the User Content posted on this page. Please note also that Sandvik Coromant may collect and use User Content and information directly from users of this page. By posting or uploading material on this page, you consent to such collection and use of posted content and information. As a part of our partnership with you, we will do our very best to keep this page a friendly and factual place. However, since we are not able to monitor every posting or dialogue, we realize that the occasional objectionable post may show up from time to time. We reserve the right to remove User Content that is:

- Abusive, defamatory or obscene
- Fraudulent, deceptive or misleading
- In violation of any intellectual property rights
- In violation of any law or regulation
- Otherwise offensive
- Off topic
- Sales pitches
- Spam

We also reserve the right to block users from the Sandvik Coromant page who exhibit these or otherwise offensive/intrusive behaviors and report such users to Facebook.

11/08/2026

When high-value components are on the line, process reliability isn't optional — it's the whole job.

https://shorturl.at/o00N0

CoroMill® MR20 delivers predictable, trouble-free profiling with unmatched stability and process security, cut after cut.

05/08/2026

High-volume hole making shouldn't come with a learning curve — or downtime you can't predict.
https://shorturl.at/qpiXZ
CoroDrill® DE10 delivers plug-and-play functionality, high feed capability, and quick tip changes for consistent, predictable performance across a wide range of applications.
What's your current bottleneck in high-volume hole making — cycle time, tip changes, or something else?

31/07/2026

Composite machining can be challenging, but with the right approach, you can significantly improve the results.

https://shorturl.at/6dDee

In this video, we share the application tips that make the biggest difference when working with CoroMill® Plura composite 2P350. Watch, apply, and get more out of every cut.

What's it actually take to outperform on stainless steel drilling?https://shorturl.at/qpiXZ — see the full cutting data ...
30/07/2026

What's it actually take to outperform on stainless steel drilling?

https://shorturl.at/qpiXZ — see the full cutting data breakdown.

On a stainless steel plate component (AISI 316L austenitic, M1.02.40) machined on a Doosan NHP6300, CoroDrill® DE10 ran at a higher cutting speed (55 m/min vs. 40) and feed rate (0.16 mm vs. 0.14 mm) than the competitor tool — delivering +57% productivity, +43% tool life, and a -36% reduction in CO2 emissions per year. Hole surface quality and diameter stayed in line with expectations, with even longer tool life expected using grade GC2334.

Just invested in a new machine? Every idle day is money left on the table.https://shorturl.at/aLOuh  — see how to cut pa...
29/07/2026

Just invested in a new machine? Every idle day is money left on the table.

https://shorturl.at/aLOuh — see how to cut payback time by up to 12 months.

Typical machine investments require a three-to-five-year payback period. With the right tooling strategy from day one — quick-change solutions, modular tool assemblies, dampened tooling for vibration control, and digital machining solutions — Sandvik Coromant can help shorten that payback period by up to 12 months, lowering cost of debt and increasing your rate of return.

Ever lose hours chasing down tools or tracking down what's actually in stock?https://shorturl.at/QLQAtCoroPlus® Tool Sup...
28/07/2026

Ever lose hours chasing down tools or tracking down what's actually in stock?
https://shorturl.at/QLQAt

CoroPlus® Tool Supply gives you full control over inventory and circulating consumption, with logistics management software that surfaces real data on tool use. It cuts waste, frees up time, and can include vending machine models to automate transactions — keeping the right tools available exactly when you need them.
How are you currently tracking tool consumption on your shop floor?

08/07/2026

Ever wished gear machining didn't mean swapping machines for every feature?

https://shorturl.at/ti1CP

This power skiving demo shows milling across multiple gear and spline features, completed in a single set-up on a multi-task machine. Compared with broaching, shaping and hobbing, cycle times drop, and re-clamping and handling disappear. Dry machining also cuts coolant costs and supports a more sustainable process.
What gear feature would you want to see milled in one set-up?

Machining high-value components where reliability isn't optional?https://shorturl.at/o00N0CoroMill® MR20 delivers contro...
07/07/2026

Machining high-value components where reliability isn't optional?

https://shorturl.at/o00N0

CoroMill® MR20 delivers controlled profiling with unmatched stability, built for processes where reliability and predictability are non-negotiable. Its innovative design ensures superior stability, enabling secure operations and consistent results, with trouble-free profiling versatility across ISO M, ISO S, and ISO P materials — boosting both productivity and confidence.
What material are you profiling that needs more predictable results?

06/07/2026

How do you stay in control of a cut you can't even see?
https://shorturl.at/ChBlx - see how in-tool sensing solves it.

In a fully closed-door environment, precision is everything. By combining sensorized tooling, process control, and years of trusted collaboration with Niles-Simmons (part of the NSH Group), we delivered a turnkey solution for aerospace landing gear machining that proved control doesn't require line of sight.
Project in collaboration with Niles-Simmons.
What's your approach to process security when you can't see the cut?

Address

Sandvik Coromant India Pvt Ltd, Old Pune/Mumbai Highway, Dapodi
Pune
411012

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Alerts

Be the first to know and let us send you an email when Sandvik Coromant INDIA posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Sandvik Coromant INDIA:

Shortcuts

Share