CHAMY Engineering and Lubrications PL

CHAMY Engineering and Lubrications PL Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from CHAMY Engineering and Lubrications PL, Industrial Company, thane, Thane.

Sigma Therm N (-50°C) to 280°Chashtag Fluid for Heating and Cooling #Sigma Therm - N is a Heat Transfer Fluid based on ...
15/09/2025

Sigma Therm N (-50°C) to 280°C
hashtag Fluid for Heating and Cooling #

Sigma Therm - N is a Heat Transfer Fluid based on Alkylated Aromatic, used in fluid Heating and Cooling applications #

Application:
Indirect closed heat transfer systems: (-50°C) to 280°C

This single fluid caters the dual demand heating and cooling in #, Chemical # and other #

Benefits:
Simplifies by eliminating multiple fluids for and cooling #
Engineered for Longevity and lasting performance.
Cost Optimized Solution for maximum value
Effortless operations with minimum maintenance
It serves as a superior alternative to conventional dual steam & # or & brine systems #.

59 # Sigma Therm N #

Sigma Therm – 200 (-50°C) to 175°C)Sigma THERM®-200 is a synthetic organic heat transfer fluid based on Inhibited Glyc...
08/09/2025

Sigma Therm – 200 (-50°C) to 175°C)

Sigma THERM®-200 is a synthetic organic heat transfer fluid based on Inhibited Glycol # and corrosion inhibitors.

Application:
ØIndirect closed heat transfer systems from (–50) °C to 175 °C.

ØThis single fluid-based solution is used for challenging requirement of Pharmaceutical, Fine Chemicals, HVAC, and other industries where two different circuits with different fluids are there for cooling and heating purpose.

Applications:
& Beverage Processing # Pharmaceutical Processing #

THERM 200 # SIGMA THERM 200 # CLARIANT N ANTIFREEZE #

Sigma Therm – V (-115°C) to 175°C fluid for Heating and Cooling #Sigma THERM®-V is an -low temperature heat transfer f...
08/09/2025

Sigma Therm – V (-115°C) to 175°C
fluid for Heating and Cooling #

Sigma THERM®-V is an -low temperature heat transfer fluid # for Single Fluid Heating and Cooling System.

Application:
Indirect closed heat transfer systems: (-115 °C) to 175 °C.

This single fluid caters the dual demand for heating and cooling in # Fine Chemicals # and other #

Application:
It has got boiling point of 99°C. For higher operating temperature care should be taken for proper design of system. It is highly recommended to use # Blanketing in expansion tank. Pressure release devices should be provided at appropriate places.

# Therminol VLT #

JET-LOK III ZINC-FREE THREADLOCKER / TWO-PART EPOXYJET-LOK III is a two-part zinc-free epoxy with largely non-metallic f...
08/09/2025

JET-LOK III
ZINC-FREE THREADLOCKER / TWO-PART EPOXY

JET-LOK III is a two-part zinc-free epoxy with largely non-metallic fillers that can be used to permanently lock threaded connections under normal operating conditions. Both the handy-pak and kit use a new catalyst for added pot life and durability with lower toxicity and less heat generation making it the optimum choice for any application. It is designed for use on all threaded joints or fasteners where an exceptionally strong and durable bond is required. It is especially useful on drilling tools, casing, and other tubulars where the effective prevention of joint loosening is required.

The catalyst is emptied into the container containing the base epoxy resin, where the two are thoroughly mixed. The applicator is used to completely cover the male threads with the mixture, and the joint is then coupled. The catalyst/hardener when stirred homogeneously into the resin results in a pot life of the mixture under average conditions of 25-75 minutes, during which time it remains in a workable consistency. The mixture of the resin and catalyst also result in lower exotherm, temperatures stay below 150°F (66°C), so safer for the user. The resin is cured and the connection ready for service in 4-6 hours. The cure time can be reduced by elevating the temperature up to 250°F (121°C) and increased by spreading to a thinner film to reduce the heat generated by the reaction.

III # BAKERLOK # FORUMLOK # TORQLOK # Thread locker # Oil and Gas #

Sigma Therm - P (-94) °C to 230 °C Sigma THERM -P is a Food Grade synthetic organic heat transfer fluid.Application:Ø In...
08/09/2025

Sigma Therm - P (-94) °C to 230 °C

Sigma THERM -P is a Food Grade synthetic organic heat transfer fluid.

Application:
Ø Indirect closed hashtag transfer systems # from (-94) °C to 230 °C in liquid phase. Without pressurization of system up to 170°C and with proper pressurization up to 230°C.

Ø This single fluid is used for challenging requirement of #, hashtag Chemicals # and other # where two different circuits with different fluids are there for cooling and heating purpose.
ØFormulation of sigma THERM®-P is based on all ingredients complies with US FDA, chapter 21 CFR, 178.3570 , HT1 category.

D12 # SigmaTherm P #

Applications:
Processing # Food Grade Heat Transfer Fluid #

Sigma Therm – F (-10°C) to 320°C ) Grade Heat Transfer Fluid #Sigma THERM®-F is a thermally stable food grade heat tran...
08/09/2025

Sigma Therm – F (-10°C) to 320°C )
Grade Heat Transfer Fluid #

Sigma THERM®-F is a thermally stable food grade heat transfer fluid. It is recommended up to 320 ˚C bulk oil temperature into closed loop heat transfer system.

Formulation of sigma THERM®-F is based on all ingredients complies with US FDA, chapter 21 CFR, 178.3570.

Sigma THERM®-F is registered with NSF for HT1 grade (Reg. No. 145290) (HT – Heat Transfer, 1 – Incidental Food Contact) – Highest Safety

Application:
ØUsed as a heat transfer media in all types of Food and Pharma industries like Edible Oil Refinery, Spices, Herbs, Namkeen, Sweets, Restaurants, Bakery, Dairy, Confectionery items, Distillery, etc.

ØSigma THERM®-F meets highest safety standers for food industries and fit perfectly in HACCP (Hazard Analysis and Critical Control Point) and GMP (Good Manufacturing Practice) plans.

Grade Heat Transfer Fluids #

Applications:
PROCESSING # Food & Beverage Processing # Industrial Manufacturing # Bio Diesel # OIL AND GAS #

Sigma Therm - G (- 3 °C to 350 °C ) Temperature Liquid Phase # Heat Transfer Fluid #Sigma THERM®-G is a # organic t...
08/09/2025

Sigma Therm - G (- 3 °C to 350 °C )
Temperature Liquid Phase # Heat Transfer Fluid #

Sigma THERM®-G is a # organic transfer fluid # based on Partially Hydrogenated Terphenyl or Modified Terphenyl. This chemistry has been used successfully in high temperature application since so many years.

Application:
Indirect closed loop liquid heat transfer systems from - 3 °C to 350 °C. It can also be used in the system containing similar chemistry heat transfer fluids for top up or replacement purpose.

It is highly recommended to use Nitrogen Blanket in Expansion tank to prevent oxidation of heat transfer fluid.

Ø Yarn Manufacturing Process #
Ø Process #
Ø oil recovery #
Ø Production #
Ø Processing #

66 # DOWTHERM RP hashtag THERM G # Marlotherm SH # FRAGOLTHERM 660 # RENOLITH THERM 380S # BP OLEX WF 0801 # BP TRANSCAL SA # PERFECTO HTS 16 # FRAGOLTHERM 620 #

/ FORUMLOK™ # Thread-Locking Compound #Fast Cure Forumlok Thread-Locking Compound replaces welding for casing joints ...
02/09/2025

/ FORUMLOK™ # Thread-Locking Compound #

Fast Cure Forumlok Thread-Locking Compound replaces welding for casing joints on the bottom lengths to prevent unscrewing while drilling out cement. Welding of shoes, couplings, and collars to casing often weakens the casing and should be avoided wherever possible.

Application:
and Gas #

SIGMA THERM 100 (-50°C to 175°C) Fluid for Heating and Cooling #Sigma THERM®-100 is a synthetic organic heat transfer f...
02/09/2025

SIGMA THERM 100 (-50°C to 175°C)
Fluid for Heating and Cooling #

Sigma THERM®-100 is a synthetic organic heat transfer fluid based on # Inhibited Ethylene Glycol # and corrosion inhibitors with reserve alkalinity.

Application:
Ø Indirect closed heat transfer systems from (- 50) °C to 175 °C.
Ø This single fluid-based solution is used for challenging requirement of Pharmaceutical, Fine Chemicals, HVAC and other industries where two different circuits with different fluids are there for cooling and heating purpose.

Benefits:
Ø Eliminates dual fluids for heating and cooling
Ø Long Life
Ø Cost Effective Solution
Ø Trouble free Operation

# DOW THERM 100 # SIGMA THERM 100 #

Applications
PROCESSING # WINDMILL #

Sigma Therm – K Up to 320°CSigma THERM®-K is a synthetic heat transfer fluid. Application:ØIndirect closed heat transfer...
02/09/2025

Sigma Therm – K Up to 320°C

Sigma THERM®-K is a synthetic heat transfer fluid.

Application:
ØIndirect closed heat transfer systems up to 320°C.
ØFor best life it should be used at or below 300°C.

Sigma THERM®-K has lower Viscosity as compared to other thermic fluids - lower power consumption of circulating pump and high co-efficient of heat transfer.

Sigma THERM®-K has been thoroughly tested in the laboratory with different proportionate of mineral oil at various high temperatures for stability and other related parameters.

Based on results it is proved that Sigma THERM®-K could be used for top- up purpose in the systems already containing mineral oil based thermic fluids or similar chemistry synthetic fluid.

55 # Sigma Therm K #

Applications
and Gas # Industrial Manufacturing # Bio Diesel # Solar # Chemical Processing # Plastic, Polymer & Styrene # Asphalt # Marine #

SIGMA THERM - A ( 12ºC to 400ºC ) High Temperature Vapour/Liquid Phase # Heat Transfer Fluid #Description: Sigma ® T H ...
02/09/2025

SIGMA THERM - A ( 12ºC to 400ºC )
High Temperature Vapour/Liquid Phase # Heat Transfer Fluid #

Description:
Sigma ® T H E R M - A is a thermally stable pure heat transfer fluid which offer you excellent heat transfer capabilities in both liquid and v***r phase up to 400ºC.
Ø This highly stable heat transfer fluid has an application temperature range of 12ºC to 400ºC as a liquid phase and 257ºC to 400ºC as a v***r phase.
Ø In addition, it's cost-effective! sigma THERM®-A is thermally more stable thermic fluid than general thermic fluids available in market.
Ø Sigma T H E R M - A also is non-corrosive to metals and is chemically stable. Finally, in keeping with our commitment to the environment, sigma THERM®-A can be fully reprocessed.
Ø Sigma ® T H E R M - A can also be used for top up / make up for the system containing other similar fluids.

-VP1 # DOW THERM - A # SIGMA THERM A # FRAGOLTHERM DPO #

Applications:
Processing # Bio Diesel # Solar # Chemical Processing # Plastic, Polymer & Styrene # Asphalt #

Sigma Therm - S (- 80 °C to 300 °C) fluid for Heating and Cooling # Heat Transfer Fluid #Sigma THERM®-S is a synthetic ...
21/08/2024

Sigma Therm - S (- 80 °C to 300 °C)
fluid for Heating and Cooling # Heat Transfer Fluid #

Sigma THERM®-S is a synthetic organic heat transfer fluid based on Alkylated aromatic.

Application:
ØIndirect closed heat transfer systems from - 80 °C to 160 °C in liquid phase without pressurization of system and with proper pressurization up to 300°C

ØThis single fluid is used for challenging requirement of Pharmaceutical, Fine Chemicals and other industries where two different circuits with different fluids are there for cooling and heating purpose.

ØIt replaces traditional dual steam & glycol or steam & brine systems.

LT # Dowtherm J # SigmaTherm S #

Applications:
Processing # Chemical Processing #

Email: [email protected]

Address

Thane
Thane
400610

Telephone

+919920337763

Website

Alerts

Be the first to know and let us send you an email when CHAMY Engineering and Lubrications PL posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category