SOKO Fasteners

14/04/2026

Soko Fasteners N-851 Heavy Duty Pneumatic Stapler Machine ❤️.
Key Features📝🤞
​Adjustable Depth Control:Features a dial or setting to control how deep the staples are driven into the material.
​Quick-Jam Release: ✔️👌The front latch opens easily to clear staple jams in seconds, minimizing downtime.😎
​Ergonomic Grip: Contoured, anti-slip rubber handle designed to reduce vibration and hand fatigue during long shifts.
​Industrial Durability: Built with a high-torque piston system and anti-dust seals, making it suitable for sawdust-heavy workshops.
​Primary Applications🦺⚒️
​This stapler is designed for high-volume industrial tasks, including:
​Woodworking: Furniture framing, cabinet assembly, and plywood frame building.
​Construction: Wall sheathing, sub-flooring, and roof decking.
​Logistics:👍 Assembly of wooden pallets, crates, and heavy-duty packaging.
​General: Vinyl siding, fencing, and stretching canvas.
​Maintenance Tip: To ensure a long service life, it is recommended to add 2–3 drops of pneumatic tool oil into the air inlet daily before use.
Feature Specification📝✔️
Model N851 (100 Series Xpro)
Staple Gauge 16 Gauge (1.60mm x 1.40mm wire)
Crown Width 7/16" (approx. 10.8mm to 11.1mm)
Staple Length 25mm to 51mm (1" to 2")
Magazine Capacity 140 to 160 Staples
Operating Pressure 70 – 120 PSI (5 – 8.3 bar)
Body Material Die-cast Aluminum
Weight Approximately 2.35kg to 3.2kg .

25/03/2026

Presenting Soko fasteners Pneumatic Clinching Clip Tool a specialized industrial fastener used primarily in the assembly of bedding, automotive seating, and wire-to-wire applications.
​These tools are designed to wrap a metal clip around two wires or a wire and a frame, "clinching" them together securely.
​Key Technical Specifications
​While specific performance varies by the exact model number, pneumatic clinching tools typically operate within these parameters:
​Operating Pressure: Generally between 5.5 to 7.0 bar (80–100 PSI).
​Actuation: Pneumatic piston drive for consistent, high-speed clipping.
​Magazine Type: Curved rail (as seen in the image) designed to hold strips of clips, often called "Omega" or "CL" clips.
​Weight: Usually ranges from 2.0kg to 4.0kg depending on the jaw size and build material.
​Common Applications
​Upholstery & Bedding: Securing spring coils to border wires in mattresses.
​Automotive: Assembling car seat frames and lumbar supports.
​Industrial Fencing: Attaching wire mesh to tension wires.
​Packaging: Closing heavy-duty bags or securing wire cages and crates.
​Maintenance & Safety Tips
​Air Lubrication: These tools require a constant supply of oiled air. Using an In-line FRL (Filter-Regulator-Lubricator) unit is highly recommended to prevent internal O-ring wear.
​Jaw Inspection: Regularly check the "jaws" or the clinching mechanism for metal shavings or debris that could cause jams.
​Pressure Regulation: Never exceed the maximum rated PSI, as this can lead to premature seal failure or damage the return spring.
​Would you like me to draft a technical datasheet or a promotional product description based on this tool?

21/03/2026

We offer a comprehensive range of pneumatic tools, staple pins, brad nails, coil nails, and all packaging materials. 💼🔧🔨📦💥

02/03/2026

31/01/2026

New Arrival 📢🪇🥁✨️Industrial Pneumatic SFCN130 Coil Nailer 💪
🔧 Industrial Pneumatic 130 mm Coil Nailer
Tool Type:
Heavy-Duty Pneumatic Coil Nailer (130 mm)
🔩 Nail Specifications
Nail Type: Wire-welded / wire-collated coil nails
Nail Length: 65 mm – 130 mm
Nail Diameter: 2.9 – 4.2 mm
Coil Angle: 15°
Magazine Capacity: 250 – 300 nails per coil
💨 Air & Performance
Operating Pressure: 5 – 8 bar (70 – 120 PSI)
Air Inlet: 1/4" BSP
Driving Power: Extra-high impact force for thick hardwood
Trigger System: Sequential / Contact firing (model dependent)
🛠️ Construction & Features
Heavy-duty aluminium alloy body
Industrial piston & cylinder for continuous use
Side handle support for better control
Adjustable depth control
Quick-release magazine
Rubber grip handle for reduced vibration
Protective nose tip to avoid surface damage
⚙️ Applications
Heavy pallet & crate manufacturing
Wooden cable drum assembly
Export packaging
Timber construction.
⚖️ Weight
Approx. 5.5 – 6.5 kg
✅ Key Advantages
✔ Handles extra-long 130 mm nails
✔ Strong & stable for industrial production
✔ High durability, low maintenance
✔ Designed for 24/7 factory operation
If you want.👌

30/01/2026

SOKO 🥁🪇MODEL-SFCN130🔥which is a high-capacity industrial pneumatic coil nailer made in taiwan 💪.🦺 These are specifically designed for demanding tasks like assembling wooden cable drums (reels), pallets, and crates.
​Because cable drums require structural integrity to hold heavy wire or fiber optics, using the right technique is key.
​🛠️ Application Overview: Wooden Cable Drums
​For wooden cable drums, you are likely fastening the fl**ges (the round ends) to the barrel staves (the wooden slats in the middle).
​1. Technical Specifications
​Fastener Type: Wire-collated coil nails.
​Nail Length: The SFCN130 typically handles lengths from 75mm to 130mm (approx. 3" to 5 1/8").
​Operating Pressure: Usually between 70–120 PSI (5–8 bar).
​Note: Ensure your compressor can maintain a high CFM (cubic feet per minute) since this tool consumes a lot of air per shot.
​2. Best Practices for Assembly
​Grain Orientation: When nailing the staves to the fl**ge, try to drive nails at a slight angle (toenailing) if the wood is prone to splitting.
​Safety Guard: Always keep the plastic nose shield (visible in your photo) attached. It prevents wood splinters from flying back at you during high-pressure firing.
​Depth Adjustment: Use the dial near the nose to ensure the nail heads are flush. For cable drums, protruding heads can snag the cable, and over-driven nails weaken the joint.
​3. Maintenance for High-Volume Work
​If you are running a production line for these drums:
​Lubrication: Add 2–3 drops of pneumatic tool oil into the air inlet every morning.
​Clearance: Check the feed pawl (inside the black drum) for debris. Sawdust buildup from the drum wood can cause feeding jams.
​⚠️ Important Safety Reminder
​The SFCN130 is a powerful "jumbo" nailer. Because of the force required to drive 130mm nails, the recoil can be significant. Always use two hands—one on the trigger handle and one on the secondary support handle—to maintain control.
​Would you like me to help you calculate the number of nails or the coil capacity you'll need based on how many cable drums you're building? 🎉👍💪

27/01/2026

SOKO✨️🪇🥁T50PB Auto Shut-Off Pneumatic Screwdriver 💪
✅ Type
Auto Shut-Off Pneumatic Screwdriver
Stops automatically once the preset torque is reached (prevents over-tightening)
✅ Drive
1/4 inch Hex Bit Holder
Compatible with standard screwdriver bits
✅ Torque Range
Approx. 5 – 50 kgf·cm
(≈ 0.5 – 5.0 Nm)
✅ Speed
~1000 RPM (typical for T50 series)
✅ Air Pressure
6 – 6.3 bar (90 PSI recommended)
✅ Air Consumption
~6 – 8 CFM
✅ Direction
Forward & Reverse
Push-to-start operation
✅ Body & Grip
Lightweight aluminum body
Anti-slip rubber grip for operator comfort
Compact and ergonomic for continuous use
✅ Accuracy
High torque repeatability
Suitable for precision assembly work
🏭 Common Applications
Electronics assembly
Electrical panels
Automotive interiors
Appliance manufacturing
Light industrial fastening
Furniture & hardware assembly
⭐ Key Advantages
✔ Auto shut-off prevents screw damage
✔ Consistent torque output
✔ Low operator fatigue
✔ Ideal for production lines
✔ Long service life

26/01/2026

Wishing a Happy Republic Day 🎉🇮🇳👏💕😊

23/01/2026

New Arrival Soko✨️🪇🥁SFCN 90 pneumatic Industrial Coil Nailer –
Specifications..👇
Model Type: SFCN90
Tool Category: Pneumatic Coil Nailer
Drive Type: Air-powered
Origin: made in Taiwan 🇹🇼
Nail Compatibility
Nail Type: Wire-collated coil nails
Nail Length Range: 45 mm – 90 mm
Nail Diameter (Shank): 2.5 – 3.8 mm
Head Type: Flat / offset round head
Collation Angle: 15°
🌀Air & Performance
Operating Pressure: 70 – 120 PSI (5 – 8 bar)
Air Consumption: Approx. 2.5 – 3.0 CFM
Recommended Compressor:
Minimum 2 HP motor
30L tank or above (your earlier compressor is suitable)
Magazine & Speed
Magazine Capacity: 200 – 300 nails (coil)
Firing Modes:
Sequential
Contact (bump fire)
Cycle Speed: Fast industrial firing
Build & Ergonomics
Body: Aluminum alloy housing
Grip: Rubber anti-slip handle
Weight: ~ 3.6 – 4.0 kg
Exhaust: Adjustable (top or rear)
Depth Adjustment: Yes
Applications
✔ Wooden pallets
✔ Cable drums
✔ Crates & boxes
✔ Roofing & siding
✔ Timber framing
✔ Packaging industry
🔑Key Features
Heavy-duty industrial piston
Tool-free nose opening (easy jam clearing)
Safety nose mechanism🦺
High-impact driver blade💪
Durable for continuous use👍

23/01/2026

SOKO Air Compressor – 30 Liter Tank
Power Your Projects with Reliable Performance
Key Specifications
Tank Capacity: 30 Liters
Type: Oil-free / Low-maintenance (typical for compact units)
Motor Power: ~1.5–2 HP
Max Pressure: Up to 8 bar / 115 PSI
Voltage: 220–240V, Single Phase
Air Output: Suitable for light to medium pneumatic tools
Noise Level: Low-noise design for workshop use
Portability: Compact body with sturdy base
Build Quality: Durable steel tank with corrosion-resistant coating
Ideal Applications
Tyre inflation
Air blow cleaning
Nail guns & staplers
Spray painting (small jobs)
Home garages & workshops
Light industrial and service use
Why Choose SOKO
✔ Reliable performance
✔ Durable construction
✔ Easy maintenance
✔ Trusted fastening & tool solution 🌟💫🔥🎯💪