Quali sono gli orari di apertura?

Lunedì 08:30 - 18:30 Martedì 08:30 - 18:30 Mercoledì 08:30 - 18:30 Giovedì 08:30 - 18:30 Venerdì 08:30 - 18:30

STEP Lab

Name: STEP Lab
Address: Via Castellana 199, Resana, 31023, IT
Telephone: +3904231999391

Chiama Indicazioni Sito Web Contatta l'azienda

Servizi di consulenza e attrezzature di test per lo sviluppo e il controllo qualità dei prodotti

12/10/2026

STEP Lab at the Automotive Testing Expo North America 2026!

Stop by our booth to see STEP Lab damper testing solutions in combination with VI-grade advanced simulation systems for Hardware-in-the-loop simulations.
Physical testing and driving simulation in one place. Come and talk to us.

📍 Novi, Michigan | Booth T1834
📅 October 27–29, 2026

06/10/2026

High strain rate testing measures how a material behaves when a load is applied at speeds far above standard mechanical testing.

The result matters directly for automotive crash safety and aerospace impact resistance, where standard test data doesn't reflect real-world load conditions.
From automotive crash safety to aerospace impact resistance, understanding material behavior at these speeds is critical.

Swipe through to see the solutions for high strain rate testing.

01/10/2026

Tensile. Compression. Impact. Fatigue.

Whatever you need to know about how your material behaves under load, there's a test for it, and a STEP Lab system built to run it.

Static or dynamic, one cycle or millions, our testing solutions adapt to the test, not the other way around.

Upgrade your lab with STEP Lab. Get in touch with us!

24/09/2026

🚀 Next stop: Toulouse

Join us at the Aerospace Test and Development Show and stop by stand 604 (Hall 7) to explore our innovative test solutions designed to elevate quality, scale efficiency, and accelerate your aerospace projects.

🗓️ 29-30 September
📍 MEETT, Toulouse, France

Aerospace Testing International

16/09/2026

Bellows look simple: they just flex, over and over.

But every fold is a stress point, and over thousands of cycles, that stress adds up until failure happens where you least expect it.
Testing bellows means reproducing that exact flexing motion, cycle after cycle, under controlled and repeatable conditions, so you know where and when a failure will occur before it happens in the field.

Interested in what a fatigue test could reveal about your bellows design?
Get in touch with Us.

www.step-lab.com

27/08/2026

See you next week at the AIAS Conference in Milan!

You can find us at from 2 to 4 September. Our experts will be waiting for you to discuss how STEP Lab solutions can enhance your testing processes.

📍 Campus Bovisa, La Masa, Edificio 28 - Politecnico di Milano
📅 September 2-4, 2026

See you there!

24/08/2026

Introducing a new module for prosthetic testing 🦿🆕

We've extended our software Test Center with a dedicated module for structural and cyclic testing of ankle-foot devices, in line with ISO 22675.

From parameter setup to automatic ex*****on of inertial compensation, stiffness estimation, and motion profile initialization, the module runs the full stance-phase sequence so your team can focus on the results.

At the core of the test control is EEPIC, our iterative learning algorithm that corrects the input motion profile in real time based on the error measured in previous cycles.

Swipe through to see how it works.

18/08/2026

Electromechanical excellence for testing prostheses 🦿

This machine, featuring an EA050 linear actuator and a torsional axis, delivers dynamic forces up to 50 kN and speeds up to 1470 mm/s for testing prosthetic components.
ISO 22675 sets the bar for how prosthetic ankle-foot systems must perform under repeated loading. Meeting it in the lab means results you can defend, not just numbers you hope hold up.

Next week, we will show you the new dedicated software for ISO 22675 testing.

Stay tuned!

29/07/2026

At STEP Lab, high-strain-rate testing is well-known territory.

It's a field we know inside out: machine, sensors, and software working together to capture what happens in milliseconds. Here, our drop weight tower DW2000 delivers the impact, while a Photron high-speed camera follows it frame by frame, from first contact to peak deformation.

This is what experience looks like in the lab. Not just running a test, but knowing exactly what to measure, and how to measure it right.

Looking for a high-strain-rate testing solution?
Visit our website or contact us directly!

22/07/2026

💥 Looking for an impact test system, but not sure where to start?

Meet the DW Series by STEP Lab, a powerful lineup of drop weight towers engineered to meet your specific needs.

The DW Series offers three unique machines tailored to your exact specifications:

-DW750 – The most compact tower, suitable for small spaces.
-DW1000 – It supports the acceleration system and climatic chamber.
-DW2000 – The most powerful tower. Top-of-the-range model.

One series. Boundless testing capabilities. That is the DW Series.

👉 Find the perfect fit for your lab. Explore the specs here: https://step-lab.com/drop-tower/

Indirizzo

Via Castellana 199
Resana
31023

Orario di apertura

Lunedì	08:30 - 18:30
Martedì	08:30 - 18:30
Mercoledì	08:30 - 18:30
Giovedì	08:30 - 18:30
Venerdì	08:30 - 18:30

Telefono

+3904231999391

Sito Web

http://www.step-lab.com/

Notifiche

Lascia la tua email e sarai tra i primi a sapere quando STEP Lab pubblica novità e promozioni. Il tuo indirizzo email non verrà utilizzato per nessun altro scopo e potrai annullare l'iscrizione in qualsiasi momento.