CS Waterpumps

09/02/2025

Catalogo 2025

CATALOGO Gennaio 2025

30/01/2025

New Grinder submersible pump

20/12/2024

28/07/2024

- Inserimento statore avvolto in carcassa di alluminio e lavorazione meccanica
- Insertion of stator wrapped in aluminum casing and mechanical processing

14/06/2024

Selfpriming jet inox water pumps with a very high hydraulic performance and a considerable pressure capacity. Able to pump up to mt. 8 depth and work perfectly even in soda-water. Suitable for water drainage and distrbution in domestic households in place of pressure tank units, as they are self-controlled.

- Liquid temperature up to 35°C (for home use according to EN 60335-2-41)
- Temperature max. liquid: 35°C (for other uses)
- Ambient temperature up to 40°C
- Total suction lift up to 8 mt.
- Continuous duty
- Pump body: Stainless Steel
- Motor Support: Aluminium
- Impeller: Noryl / Stainless Steel
- Diffuser: Noryl
- Pump fl**ge: Stainless Steel
- Shaft with rotor: Stainless Steel
- Mechanical seal: Ceramic/Graphite/NBR

28/04/2024

-Elettropompe Centrifughe per irrigazioni a scorrimento
-Centrifugal Electric Pumps for Sliding Irrigation
-Electropompes centrifuges à débit moyen et hateur élevé
-Electrobombas centrifugas de desplazamiento de caudal medio y alto

https://irp-cdn.multiscreensite.com/2fa5b084/files/uploaded/CS.pdf

18/02/2024

Drainage pumps with recessed impeller type Vortex or Two-channel for pumping charged water and liquids with suspended bodies; ideal for civil and domestic applications.

FEATURES:
Cast iron pump body with 1 "1/2 ports;
Reverse cast iron impeller of the Vortex type;
Double seal with oil barrier;
Silicon carbide on the pump side, sealing ring on the motor side;
Motor shaft in AISI 416 steel;
Ball bearings;
Liquid temperature 0 - 40 ° C;
Equipped with 10 meters of HO7 RNF cable;
Available with or without float.

MOTOR:
2-pole electric induction motor in oil bath suitable for continuous service;
Slats for stator with low specific loss;
Class F insulation;
IP 68 protection;
Condenser inserted inside;
Thermal protection for single-phase models;
For three-phase models, protection is the responsibility of the user.

OPTIONAL:
Other operating voltages and frequencies; Special liquids.

17/02/2024

Peripheral volumetric pumps suitable for small domestic systems and for modest industrial applications; characterized by a remarkable relationship between the services offered and the power required.

03/02/2024

Extremely silent single-impeller centrifugal pumps suitable for civil and industrial domestic applications with an extremely flat curve that guarantees almost constant pressures when the flow rate varies.

FEATURES :

Cast iron pump body with threaded suction and delivery ports;
Motor support in cast iron and aluminum for the models CM 75 and CM 100;
Noryl impeller and brass request for models CM 50 - CM 75 - CM 100;
Brass impeller for models CM 150 / CMT 550;
Mechanical seal in ceramic - graphite;
Motor shaft in AISI 416 steel;
Ball bearings;
Engine liquid temperature 0 - 90 ° C brass impeller / 0-50 ° C for noryl impeller;
Operating pressure max 8 bar.

MOTOR :

2-pole electric induction motor suitable for continuous operation;
Slats for stator with low specific loss;
Class F insulation;
IP 44 protection;
Thermal protection for single-phase models, for three-phase models protection is the responsibility of the user.
OPTIONAL:
Other operating voltages and frequencies; special mechanical seal; special liquids.