Toueishoji Co., Ltd.

アクセス

Toueishoji Co., Ltd. Toueishoji Co., Ltd., founded in 1982 as a subsidiary of Eiwa Kogyo, is a trusted trading company in the Ebara network.

With 40+ years of experience, we supply pumps, compressors, flexible tubes, and joints to various industries across Japan.

Maintenance requirements are an important part of pump selection—not just initial performance.The 𝗙𝗠𝗤 𝗧𝘆𝗽𝗲 uses 𝘀𝗲𝗮𝗹𝗲𝗱 𝗯...
2026/10/02

Maintenance requirements are an important part of pump selection—not just initial performance.

The 𝗙𝗠𝗤 𝗧𝘆𝗽𝗲 uses 𝘀𝗲𝗮𝗹𝗲𝗱 𝗯𝗮𝗹𝗹 𝗯𝗲𝗮𝗿𝗶𝗻𝗴𝘀, eliminating the need for lubrication and helping make maintenance easier.

It's a relatively simple design feature, but it highlights an important engineering principle: 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗰𝗼𝗻𝘀𝗶𝗱𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 𝘀𝗵𝗼𝘂𝗹𝗱 𝗯𝗲 𝗽𝗮𝗿𝘁 𝗼𝗳 𝘁𝗵𝗲 𝗲𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁 𝗱𝗲𝘀𝗶𝗴𝗻 𝗳𝗿𝗼𝗺 𝘁𝗵𝗲 𝗯𝗲𝗴𝗶𝗻𝗻𝗶𝗻𝗴.

For systems used in general water supply and irrigation, practical maintenance features can support easier routine servicing.

𝗘𝗕𝗔𝗥𝗔 × 𝗧𝗼𝘂𝗲𝗶𝘀𝗵𝗼𝗷𝗶 — 𝗲𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝘁𝗵𝗮𝘁 𝗰𝗼𝗻𝘀𝗶𝗱𝗲𝗿𝘀 𝗯𝗼𝘁𝗵 𝗼𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲.

𝗦𝗲𝗹𝗳-𝗽𝗿𝗶𝗺𝗶𝗻𝗴 𝗰𝗮𝗽𝗮𝗯𝗶𝗹𝗶𝘁𝘆 𝘄𝗶𝘁𝗵 𝗺𝘂𝗹𝘁𝗶𝘀𝘁𝗮𝗴𝗲 𝗽𝘂𝗺𝗽 𝗰𝗼𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻.The 𝗘𝗕𝗔𝗥𝗔 𝗙𝗠𝗤 𝗧𝘆𝗽𝗲 𝗠𝘂𝗹𝘁𝗶𝘀𝘁𝗮𝗴𝗲 𝗦𝗲𝗹𝗳-𝗣𝗿𝗶𝗺𝗶𝗻𝗴 𝗣𝘂𝗺𝗽 is designed fo...
2026/09/30

𝗦𝗲𝗹𝗳-𝗽𝗿𝗶𝗺𝗶𝗻𝗴 𝗰𝗮𝗽𝗮𝗯𝗶𝗹𝗶𝘁𝘆 𝘄𝗶𝘁𝗵 𝗺𝘂𝗹𝘁𝗶𝘀𝘁𝗮𝗴𝗲 𝗽𝘂𝗺𝗽 𝗰𝗼𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻.

The 𝗘𝗕𝗔𝗥𝗔 𝗙𝗠𝗤 𝗧𝘆𝗽𝗲 𝗠𝘂𝗹𝘁𝗶𝘀𝘁𝗮𝗴𝗲 𝗦𝗲𝗹𝗳-𝗣𝗿𝗶𝗺𝗶𝗻𝗴 𝗣𝘂𝗺𝗽 is designed for applications requiring general water supply or irrigation.

Its 𝟮-𝗽𝗼𝗹𝗲 𝗱𝗲𝘀𝗶𝗴𝗻 𝗽𝗿𝗼𝘃𝗶𝗱𝗲𝘀 𝗮 𝗰𝗼𝗺𝗽𝗮𝗰𝘁 𝗮𝗻𝗱 𝗹𝗶𝗴𝗵𝘁𝘄𝗲𝗶𝗴𝗵𝘁 𝗽𝘂𝗺𝗽, while sealed ball bearings eliminate the need for lubrication and help make maintenance easier. The pump provides maximum self-priming performance of 𝟲 𝗺 under the specified conditions.

The FMQ is equipped with an 𝗜𝗘𝟯 𝗧𝗼𝗽 𝗥𝘂𝗻𝗻𝗲𝗿 𝗺𝗼𝘁𝗼𝗿 and is designed for indoor installation under the specified environmental conditions.

𝗧𝗼𝘂𝗲𝗶𝘀𝗵𝗼𝗷𝗶 𝗽𝗿𝗼𝘂𝗱𝗹𝘆 𝗽𝗮𝗿𝘁𝗻𝗲𝗿𝘀 𝘄𝗶𝘁𝗵 𝗘𝗕𝗔𝗥𝗔 to provide pumping solutions designed around practical application requirements.

𝗘𝗕𝗔𝗥𝗔 × 𝗧𝗼𝘂𝗲𝗶𝘀𝗵𝗼𝗷𝗶 — 𝗰𝗼𝗺𝗽𝗮𝗰𝘁 𝗱𝗲𝘀𝗶𝗴𝗻 𝘄𝗶𝘁𝗵 𝘀𝗲𝗹𝗳-𝗽𝗿𝗶𝗺𝗶𝗻𝗴 𝗮𝗻𝗱 𝗺𝘂𝗹𝘁𝗶𝘀𝘁𝗮𝗴𝗲 𝗰𝗮𝗽𝗮𝗯𝗶𝗹𝗶𝘁𝘆.

hashtag hashtag hashtag hashtag hashtag hashtag hashtag

What if a pumping system needs 𝘀𝗲𝗹𝗳-𝗽𝗿𝗶𝗺𝗶𝗻𝗴 𝗰𝗮𝗽𝗮𝗯𝗶𝗹𝗶𝘁𝘆 𝘄𝗶𝘁𝗵𝗼𝘂𝘁 𝗴𝗶𝘃𝗶𝗻𝗴 𝘂𝗽 𝘁𝗵𝗲 𝗮𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗺𝘂𝗹𝘁𝗶𝘀𝘁𝗮𝗴𝗲 𝗽𝘂𝗺𝗽? The 𝗙𝗠𝗤 𝗧𝘆...
2026/09/28

What if a pumping system needs 𝘀𝗲𝗹𝗳-𝗽𝗿𝗶𝗺𝗶𝗻𝗴 𝗰𝗮𝗽𝗮𝗯𝗶𝗹𝗶𝘁𝘆 𝘄𝗶𝘁𝗵𝗼𝘂𝘁 𝗴𝗶𝘃𝗶𝗻𝗴 𝘂𝗽 𝘁𝗵𝗲 𝗮𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗺𝘂𝗹𝘁𝗶𝘀𝘁𝗮𝗴𝗲 𝗽𝘂𝗺𝗽?

The 𝗙𝗠𝗤 𝗧𝘆𝗽𝗲 𝗠𝘂𝗹𝘁𝗶𝘀𝘁𝗮𝗴𝗲 𝗦𝗲𝗹𝗳-𝗣𝗿𝗶𝗺𝗶𝗻𝗴 𝗣𝘂𝗺𝗽 combines these two design concepts in one pump.

Its multistage construction is paired with a 2-pole design that provides a 𝗰𝗼𝗺𝗽𝗮𝗰𝘁 𝗮𝗻𝗱 𝗹𝗶𝗴𝗵𝘁𝘄𝗲𝗶𝗴𝗵𝘁 𝗽𝘂𝗺𝗽, while its maximum self-priming performance is 𝟲 𝗺 under the specified test conditions.

The FMQ is designed for 𝗴𝗲𝗻𝗲𝗿𝗮𝗹 𝘄𝗮𝘁𝗲𝗿 𝘀𝘂𝗽𝗽𝗹𝘆 𝗮𝗻𝗱 𝗶𝗿𝗿𝗶𝗴𝗮𝘁𝗶𝗼𝗻 applications.
Understanding the actual system requirement is the first step toward selecting the appropriate pump design.

𝗘𝗕𝗔𝗥𝗔 × 𝗧𝗼𝘂𝗲𝗶𝘀𝗵𝗼𝗷𝗶 — 𝗽𝗿𝗮𝗰𝘁𝗶𝗰𝗮𝗹 𝗽𝘂𝗺𝗽𝗶𝗻𝗴 𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀 𝗳𝗼𝗿 𝗱𝗶𝗳𝗳𝗲𝗿𝗲𝗻𝘁 𝘄𝗮𝘁𝗲𝗿-𝘀𝘆𝘀𝘁𝗲𝗺 𝗻𝗲𝗲𝗱𝘀.

A pump doesn't only need to perform well during operation. 𝗠𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗮𝗰𝗰𝗲𝘀𝘀 𝗶𝘀 𝗮𝗹𝘀𝗼 𝗮𝗻 𝗶𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝗱𝗲𝘀𝗶𝗴𝗻 𝗰𝗼𝗻𝘀𝗶𝗱𝗲𝗿𝗮𝘁𝗶𝗼𝗻....
2026/09/25

A pump doesn't only need to perform well during operation. 𝗠𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗮𝗰𝗰𝗲𝘀𝘀 𝗶𝘀 𝗮𝗹𝘀𝗼 𝗮𝗻 𝗶𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝗱𝗲𝘀𝗶𝗴𝗻 𝗰𝗼𝗻𝘀𝗶𝗱𝗲𝗿𝗮𝘁𝗶𝗼𝗻.

The 𝗙𝗤 𝗧𝘆𝗽𝗲 𝘂𝘀𝗲𝘀 𝗕𝗮𝗰𝗸 𝗣𝘂𝗹𝗹 𝗢𝘂𝘁 (𝗕𝗣𝗢) construction, allowing disassembly and inspection without removing the suction/discharge piping or thermal insulation materials.

For equipment installed as part of an established water system, this design can help make inspection and servicing more practical.

Because good engineering looks beyond installation and operation—it also considers what happens when maintenance is required.

𝗘𝗕𝗔𝗥𝗔 × 𝗧𝗼𝘂𝗲𝗶𝘀𝗵𝗼𝗷𝗶 — 𝘀𝘂𝗽𝗽𝗼𝗿𝘁𝗶𝗻𝗴 𝗿𝗲𝗹𝗶𝗮𝗯𝗹𝗲 𝗲𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁 𝘁𝗵𝗿𝗼𝘂𝗴𝗵 𝗽𝗿𝗮𝗰𝘁𝗶𝗰𝗮𝗹 𝗲𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝗱𝗲𝘀𝗶𝗴𝗻.

𝗖𝗼𝗺𝗽𝗮𝗰𝘁 𝗱𝗲𝘀𝗶𝗴𝗻 𝗺𝗲𝗲𝘁𝘀 𝘀𝗲𝗹𝗳-𝗽𝗿𝗶𝗺𝗶𝗻𝗴 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲.The 𝗘𝗕𝗔𝗥𝗔 𝗙𝗤 𝗧𝘆𝗽𝗲 𝗦𝗲𝗹𝗳-𝗣𝗿𝗶𝗺𝗶𝗻𝗴 𝗣𝘂𝗺𝗽 features a 2-pole design that provides...
2026/09/23

𝗖𝗼𝗺𝗽𝗮𝗰𝘁 𝗱𝗲𝘀𝗶𝗴𝗻 𝗺𝗲𝗲𝘁𝘀 𝘀𝗲𝗹𝗳-𝗽𝗿𝗶𝗺𝗶𝗻𝗴 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲.

The 𝗘𝗕𝗔𝗥𝗔 𝗙𝗤 𝗧𝘆𝗽𝗲 𝗦𝗲𝗹𝗳-𝗣𝗿𝗶𝗺𝗶𝗻𝗴 𝗣𝘂𝗺𝗽 features a 2-pole design that provides a compact and lightweight pump, while delivering self-priming performance of up to 7 m under specified conditions.

Its 𝗕𝗮𝗰𝗸 𝗣𝘂𝗹𝗹 𝗢𝘂𝘁 (𝗕𝗣𝗢) construction also allows disassembly and inspection without removing the suction/discharge piping or thermal insulation materials. The pump uses an IE3 Top Runner motor.

The 𝗙𝗤 is designed for general water supply, irrigation, rainwater drainage, and snow-melting water spray applications.

𝗧𝗼𝘂𝗲𝗶𝘀𝗵𝗼𝗷𝗶 𝗽𝗿𝗼𝘂𝗱𝗹𝘆 𝗽𝗮𝗿𝘁𝗻𝗲𝗿𝘀 𝘄𝗶𝘁𝗵 𝗘𝗕𝗔𝗥𝗔 to provide pumping solutions designed around practical system requirements.

𝗘𝗕𝗔𝗥𝗔 × 𝗧𝗼𝘂𝗲𝗶𝘀𝗵𝗼𝗷𝗶— compact, practical, and application-focused.

Starting a water transfer system isn't always as simple as connecting a pump and piping.  𝗦𝘂𝗰𝘁𝗶𝗼𝗻 𝗰𝗼𝗻𝗱𝗶𝘁𝗶𝗼𝗻𝘀 𝗰𝗮𝗻 𝗯𝗲 𝗮𝗻 𝗶...
2026/09/21

Starting a water transfer system isn't always as simple as connecting a pump and piping.

𝗦𝘂𝗰𝘁𝗶𝗼𝗻 𝗰𝗼𝗻𝗱𝗶𝘁𝗶𝗼𝗻𝘀 𝗰𝗮𝗻 𝗯𝗲 𝗮𝗻 𝗶𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝗽𝗮𝗿𝘁 𝗼𝗳 𝗽𝘂𝗺𝗽 𝘀𝗲𝗹𝗲𝗰𝘁𝗶𝗼𝗻.

The EBARA FQ Type Self-Priming Pump is designed for self-priming performance of up to 7 m under specified conditions, while its 2-pole design provides a compact and lightweight pump.
It is designed for applications including general water supply, irrigation, rainwater drainage, and snow-melting water spray.

When designing a pumping system, understanding the suction requirements can help identify the appropriate pump configuration.

𝗘𝗕𝗔𝗥𝗔 𝘅 𝗧𝗼𝘂𝗲𝗶𝘀𝗵𝗼𝗷𝗶 - 𝘀𝘂𝗽𝗽𝗼𝗿𝘁𝗶𝗻𝗴 𝗽𝗿𝗮𝗰𝘁𝗶𝗰𝗮𝗹 𝗽𝘂𝗺𝗽𝗶𝗻𝗴 𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀 𝗳𝗼𝗿 𝗱𝗶𝗳𝗳𝗲𝗿𝗲𝗻𝘁 𝘄𝗮𝘁𝗲𝗿- 𝘀𝘆𝘀𝘁𝗲𝗺 𝗮𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀.

Pump maintenance can become more complicated when equipment needs to be disconnected from the piping system just to insp...
2026/09/18

Pump maintenance can become more complicated when equipment needs to be disconnected from the piping system just to inspect internal components.

The FQD Type addresses this with 𝗕𝗮𝗰𝗸 𝗣𝘂𝗹𝗹 𝗢𝘂𝘁 (𝗕𝗣𝗢) 𝗰𝗼𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻, allowing disassembly and inspection without removing the suction/discharge piping or thermal insulation materials.

It also uses a 𝗺𝗲𝗰𝗵𝗮𝗻𝗶𝗰𝗮𝗹 𝘀𝗲𝗮𝗹 for the shaft seal, making maintenance easier.
This is a good reminder that pump selection isn't only about performance during operation.
𝗠𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗮𝗰𝗰𝗲𝘀𝘀 𝗮𝗻𝗱 𝘀𝗲𝗿𝘃𝗶𝗰𝗲𝗮𝗯𝗶𝗹𝗶𝘁𝘆 𝘀𝗵𝗼𝘂𝗹𝗱 𝗮𝗹𝘀𝗼 𝗯𝗲 𝗽𝗮𝗿𝘁 𝗼𝗳 𝘁𝗵𝗲 𝗱𝗲𝘀𝗶𝗴𝗻 𝗰𝗼𝗻𝘀𝗶𝗱𝗲𝗿𝗮𝘁𝗶𝗼𝗻.

𝗘𝗕𝗔𝗥𝗔 × 𝗧𝗼𝘂𝗲𝗶𝘀𝗵𝗼𝗷𝗶 — 𝗲𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀 𝗱𝗲𝘀𝗶𝗴𝗻𝗲𝗱 𝘄𝗶𝘁𝗵 𝗼𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗶𝗻 𝗺𝗶𝗻𝗱.

𝗟𝗼𝗼𝗸𝗶𝗻𝗴 𝗳𝗼𝗿 𝗮 𝗽𝘂𝗺𝗽 𝗱𝗲𝘀𝗶𝗴𝗻𝗲𝗱 𝗳𝗼𝗿 𝗮𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 𝘄𝗵𝗲𝗿𝗲 𝘀𝗲𝗹𝗳-𝗽𝗿𝗶𝗺𝗶𝗻𝗴 𝗶𝘀 𝗶𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁?The 𝗘𝗕𝗔𝗥𝗔 𝗙𝗤𝗗 𝗧𝘆𝗽𝗲 𝗦𝗲𝗹𝗳-𝗣𝗿𝗶𝗺𝗶𝗻𝗴 𝗣𝘂𝗺𝗽 combin...
2026/09/16

𝗟𝗼𝗼𝗸𝗶𝗻𝗴 𝗳𝗼𝗿 𝗮 𝗽𝘂𝗺𝗽 𝗱𝗲𝘀𝗶𝗴𝗻𝗲𝗱 𝗳𝗼𝗿 𝗮𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 𝘄𝗵𝗲𝗿𝗲 𝘀𝗲𝗹𝗳-𝗽𝗿𝗶𝗺𝗶𝗻𝗴 𝗶𝘀 𝗶𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁?

The 𝗘𝗕𝗔𝗥𝗔 𝗙𝗤𝗗 𝗧𝘆𝗽𝗲 𝗦𝗲𝗹𝗳-𝗣𝗿𝗶𝗺𝗶𝗻𝗴 𝗣𝘂𝗺𝗽 combines self-priming capability with practical design features for water supply and drainage applications.

Its 𝗕𝗮𝗰𝗸 𝗣𝘂𝗹𝗹 𝗢𝘂𝘁 (𝗕𝗣𝗢) 𝗰𝗼𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻 allows disassembly and inspection without removing the suction or discharge piping. A mechanical seal is also used for the shaft seal, helping make maintenance easier.

The FQD can be installed 𝗶𝗻𝗱𝗼𝗼𝗿𝘀 𝗼𝗿 𝗼𝘂𝘁𝗱𝗼𝗼𝗿𝘀 and is designed for applications including general water supply, irrigation, rainwater drainage, and snow-melting water spray.

𝗧𝗼𝘂𝗲𝗶𝘀𝗵𝗼𝗷𝗶 𝗽𝗿𝗼𝘂𝗱𝗹𝘆 𝗽𝗮𝗿𝘁𝗻𝗲𝗿𝘀 𝘄𝗶𝘁𝗵 𝗘𝗕𝗔𝗥𝗔 to provide practical pumping solutions for different industrial and water-system requirements.

𝗘𝗕𝗔𝗥𝗔 × 𝗧𝗼𝘂𝗲𝗶𝘀𝗵𝗼𝗷𝗶 — 𝗽𝗿𝗮𝗰𝘁𝗶𝗰𝗮𝗹 𝗲𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝗳𝗼𝗿 𝗿𝗲𝗮𝗹-𝘄𝗼𝗿𝗹𝗱 𝗮𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀.

Not every pumping system has ideal suction conditions.That’s where a 𝘀𝗲𝗹𝗳-𝗽𝗿𝗶𝗺𝗶𝗻𝗴 𝗽𝘂𝗺𝗽 can offer a practical advantage. ...
2026/09/14

Not every pumping system has ideal suction conditions.

That’s where a 𝘀𝗲𝗹𝗳-𝗽𝗿𝗶𝗺𝗶𝗻𝗴 𝗽𝘂𝗺𝗽 can offer a practical advantage. The FQD Type is designed for self-priming performance of up to 𝟳 𝗺, depending on the model and specified conditions.
It is suitable for applications such as general water supply, irrigation, rainwater drainage, and snow-melting water spray.

For systems where suction conditions need careful consideration, choosing the right pump design can make a difference.

𝗚𝗼𝗼𝗱 𝗽𝘂𝗺𝗽 𝘀𝗲𝗹𝗲𝗰𝘁𝗶𝗼𝗻 𝘀𝘁𝗮𝗿𝘁𝘀 𝘄𝗶𝘁𝗵 𝘂𝗻𝗱𝗲𝗿𝘀𝘁𝗮𝗻𝗱𝗶𝗻𝗴 𝘁𝗵𝗲 𝗮𝗰𝘁𝘂𝗮𝗹 𝗮𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻.

𝗢𝗻𝗲 𝗽𝘂𝗺𝗽𝗶𝗻𝗴 𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻 𝗰𝗮𝗻 𝘀𝗲𝗿𝘃𝗲 𝗺𝗼𝗿𝗲 𝘁𝗵𝗮𝗻 𝗼𝗻𝗲 𝘀𝘆𝘀𝘁𝗲𝗺.The P121 is designed for several clean-water applications, including...
2026/09/11

𝗢𝗻𝗲 𝗽𝘂𝗺𝗽𝗶𝗻𝗴 𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻 𝗰𝗮𝗻 𝘀𝗲𝗿𝘃𝗲 𝗺𝗼𝗿𝗲 𝘁𝗵𝗮𝗻 𝗼𝗻𝗲 𝘀𝘆𝘀𝘁𝗲𝗺.

The P121 is designed for several clean-water applications, including 𝗵𝗼𝘁 𝗮𝗻𝗱 𝗰𝗵𝗶𝗹𝗹𝗲𝗱 𝘄𝗮𝘁𝗲𝗿 𝗰𝗶𝗿𝗰𝘂𝗹𝗮𝘁𝗶𝗼𝗻, 𝗵𝗼𝘁 𝘄𝗮𝘁𝗲𝗿 𝘀𝘂𝗽𝗽𝗹𝘆, 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗶𝗼𝗻 𝗶𝗻𝘁𝗼 𝗺𝗮𝗰𝗵𝗶𝗻𝗲𝗿𝘆 𝘀𝘆𝘀𝘁𝗲𝗺𝘀, 𝗮𝗻𝗱 𝗴𝗲𝗻𝗲𝗿𝗮𝗹 𝘄𝗮𝘁𝗲𝗿 𝘀𝘂𝗽𝗽𝗹𝘆.

It can handle clean water from 0–80°C, subject to the specified application conditions.
This makes application requirements an important part of pump selection—not simply the pump's size or capacity.

𝗘𝗕𝗔𝗥𝗔 × 𝗧𝗼𝘂𝗲𝗶𝘀𝗵𝗼𝗷𝗶 provide pumping solutions for a wide range of water circulation and supply needs.

𝗧𝗵𝗲 𝗿𝗶𝗴𝗵𝘁 𝗽𝘂𝗺𝗽 𝘀𝘁𝗮𝗿𝘁𝘀 𝘄𝗶𝘁𝗵 𝘁𝗵𝗲 𝗿𝗶𝗴𝗵𝘁 𝗮𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻.

住所

〒105-0014
Tokyo Minato
3-30-1 Shiba

営業時間

月曜日 08:00 - 17:00
火曜日 08:00 - 17:00
水曜日 08:00 - 17:00
木曜日 08:00 - 17:00
金曜日 08:00 - 17:00

ウェブサイト

アラート

Toueishoji Co., Ltd.が新しいニュースやキャンペーンを投稿したら、いち早くメールでお知らせします。メールアドレスが他の目的に使われることはなく、いつでも配信を停止できます。

ショートカット

共有する

カテゴリー

近くのエンジニアリング会社