Apiste Corporation

27/10/2026

🔍 Want to reduce trips to the measuring room and improve production efficiency?

Mitutoyo Asia Pacific × Apiste brings measurement directly to the production floor!

Apiste’s PAU Precision Air Conditioner provides localized temperature control around measuring instruments.
Combined with Mitutoyo measuring instruments, it helps create an environment where parts can be measured on-site immediately after machining.

✅ Key benefits of on-site measurement
・High-precision temperature control of ±0.1°C
・Stable temperatures, dehumidification, and dust protection
・Less time spent moving parts to the measuring room
・Lower costs and shorter lead times for setting up a dedicated measuring room

Make measurement part of your production process to shorten cycle times and improve productivity!

WhatsApp 📞 +81 80-5330-1083
Please contact us!

23/10/2026

🔧 Unsure where to start when replacing the fan in your control panel cooling unit?

Apiste’s maintenance video guides you through the process using an actual unit, from removing the panel to replacing and securing the fan.

See how to disconnect the connectors and secure the fan—steps that can be difficult to picture from written instructions alone.

🎥 Watch the replacement process in about two minutes!
Use this video to prepare for maintenance or share the procedure with your team.

https://youtu.be/H3jdLGfiIzU?si=AD9sD00NhfYD17OH

The video explains how to maintenance Apiste's control panel coolin...

20/10/2026

Are you facing any of these challenges when choosing a chiller?

"I want to choose a chiller that is not subject to fluorocarbon and GWP regulations."
"I need a chiller that supports a wide temperature range."
"I want reliable performance even in harsh environments."
"Energy efficiency is also a priority."

💡 With Apiste's extensive chiller lineup, you can find the right solution for your specific applications and operating conditions.

・Non-fluorocarbon chillers to address fluorocarbon and GWP regulations
・Wide temperature range from -10°C to +80°C
・Up to 50% energy savings
・High-precision temperature control of ±0.05°C
・Suitable for outdoor use and high-temperature environments
・Both air-cooled and water-cooled models available

❄️ From cooling capacity to circulating water temperature ranges, Apiste offers solutions tailored to a wide variety of requirements.

More than just cooling — Apiste chillers are designed to solve real challenges on the factory floor.

With our extensive lineup, we meet a wide range of industrial cooling needs.

WhatsApp 📞 +81 80-5330-1083
Please contact us!

15/10/2026

🪶 Is the weight of your mist collector causing problems?

Conventional mist collectors are often heavy, making installation and maintenance difficult and time-consuming.

Apiste's GME Series is changing that with its innovative lightweight design!

💡 Up to 55.7% Lighter!
Thanks to its aluminum die-cast body, the GME Series achieves significant weight reduction compared to conventional mist collectors.

This lightweight design offers several key benefits:

✅ Easy Installation!
The lightweight and compact design makes installation easier, even on top of equipment.

✅ Easy Maintenance!
The lightweight and modular body design allows for smooth internal cleaning and parts replacement.

Apiste's GME Series combines lightweight construction with excellent maintainability.

Improve equipment efficiency and streamline maintenance operations with the GME Series!

WhatsApp 📞 +81 80-5330-1083
Please contact us!

09/10/2026

Could “Measurement Errors” or “Dimensional Errors” be caused by changes in temperature and humidity?

In precision inspection and measurement processes, fluctuations in ambient temperature can lead to inconsistent measurement results.
In manufacturing environments, changes in temperature and humidity can also affect workpiece dimensions, potentially impacting product quality.

🔍 One effective solution is “Localized Air Conditioning,” which precisely controls temperature and humidity only in the areas where it is needed.

Apiste’s Precision Air Conditioning System, “PAU series,” provides high-precision temperature and humidity control by enclosing the target area within a dedicated booth.
・Temperature Control: ±0.1°C
・Humidity Control: ±0.5% RH

🌡️ By conditioning only the required space instead of the entire room, the PAU series achieves both energy savings and highly precise temperature and humidity control.

It minimizes the effects of environmental changes caused by weather, day-night temperature differences, and seasonal variations, helping improve measurement reliability and stabilize manufacturing conditions.

Are you experiencing inconsistencies in product quality?

The solution might start with better temperature and humidity control!

WhatsApp 📞 +81 80-5330-1083
Please contact us!

06/10/2026

🚗 Support Stable Automotive Manufacturing with Enclosure Cooling Units.

In automotive manufacturing, control panels are used throughout many processes, including casting, forging, heat treatment, machining, pressing, resin molding, welding, painting, assembly, inspection, and material handling.

Heat, dust, and humidity inside control panels can cause electronic component failures and unexpected equipment downtime.

Apiste’s ENC Series Enclosure Cooling Units use a closed-loop cooling system that does not draw in outside air, helping cool the control panel while preventing dust and moisture from entering.

The lineup is also designed with energy efficiency and easy maintenance in mind. 💡
・HFC alternative refrigerant
・Energy-saving operation with inverter control
・Filterless design for reduced maintenance
・Cooling, dust protection, and dehumidification for control panels

The ENC Series can be used with a wide range of equipment in automotive manufacturing, including injection molding machines, presses, welding and painting robots, CNC lathes, inspection systems, and material handling equipment.

Looking to improve equipment reliability and extend service life?

It may be time to review the thermal management of your control panels.

WhatsApp 📞 +81 80-5330-1083
Please contact us!

29/09/2026

Regular maintenance is essential to keep your mist collector performing at its best.
This time, we’re introducing how to clean the front cover and rear unit of Apiste’s high-performance GME-S-Pro Mist Collector.

🧹 Cleaning Tips
・Use a mild alkaline, mild acidic, or neutral detergent
・Apply the detergent, then wash thoroughly with a high-pressure washer
・After washing, wipe off all remaining moisture with a dry cloth

Both the front cover and rear unit can be cleaned in the same way.

🔧 Regular cleaning and maintenance help keep your mist collector in good working condition.

Watch the video for detailed cleaning instructions.
https://youtu.be/Achm0QV1iJU?si=1MmfY02ETA7ktkVr

You can also find other maintenance videos on our YouTube channel.
Check them out and make them part of your regular maintenance routine.

The video explains how to operate Apiste's high-performance mist co...

17/09/2026

Variations in quality and inspection data may be caused by the air-conditioning environment.

In manufacturing and research environments, changes in temperature, humidity, and air-conditioning conditions can affect product quality and measurement results.

⚠️ Are you facing any of these challenges?

・Quality varies depending on the time of day or season
・Yield changes significantly depending on the weather
・Test and inspection data fluctuate depending on the installation environment

For these challenges, instead of air-conditioning the entire facility, it can be effective to precisely control only the space where stable conditions are required.

Apiste’s Precision Air Conditioner allows temperature, humidity, and cleanliness to be controlled according to your application.

🌡️ Temperature control: ±0.1°C or better
💧 Humidity control: ±0.5%RH or better
Cleanliness control: Class 10–10,000

By precisely controlling only the areas that require a stable environment, such as inspection and measurement processes or research equipment, you can create more consistent conditions for your operations.

If you are experiencing variations in quality or inspection data, please feel free to contact Apiste.

WhatsApp 📞 +81 80-5330-1083
Please contact us!

15/09/2026

🔧 Stable factory operations start with proper measures against “heat,” “dust,” and “condensation” inside control panels.

Apiste’s ENC Series Enclosure Cooling Units help maintain appropriate temperatures inside control panels and reduce the risk of electronic equipment failures.

At one automotive parts manufacturer, the number of control panel-related failures decreased by approximately 57% after installing ENC units.

Reducing equipment failures can also help lower repair costs, spare parts inventory, production losses caused by line stoppages, and maintenance workload.

🌱 In addition, inverter control adjusts operation according to the cooling load, achieving energy savings of up to 55%.

The finless and filterless design eliminates the need for filter replacement, helping reduce maintenance work.

Why not review your control panel heat countermeasures to achieve both stable equipment operation and cost savings?

WhatsApp 📞 +81 80-5330-1083
Please contact us!

14/09/2026

Apisute maintains an inventory of the ENC series in Thailand.🇹🇭
We can ship your order immediately—no waiting for export!