E&W Supply

Call Directions Contact the business

E&W Supply ផ្គត់ផ្គង់គ្រឿងអគ្គិសនី និង​គ្រឿងទឹក

18/09/2026

🔥 Top 10 DCS Brands in Industrial Automation – 2026

Distributed Control Systems (DCS) are at the heart of many process industries, providing centralized monitoring, control, alarm management, and process optimization.

Some major DCS platforms widely encountered in industrial automation include:

1️⃣ Honeywell – Experion PKS
2️⃣ Emerson – DeltaV
3️⃣ ABB – System 800xA
4️⃣ Yokogawa – CENTUM VP
5️⃣ Siemens – PCS 7 / PCS neo
6️⃣ Schneider Electric – EcoStruxure Foxboro DCS
7️⃣ Rockwell Automation – PlantPAx
8️⃣ Mitsubishi Electric – Process-control solutions
9️⃣ Valmet – Valmet DNA
🔟 Azbil – Harmonas-DEO

Each platform has its own architecture, engineering tools, controllers, I/O systems, communication options, redundancy features, and application strengths.

💡 For an automation engineer, knowing the fundamentals of DCS architecture is often more important than knowing only one particular brand.

Which DCS platform are you currently working with? 👇

16/09/2026

💧 Sand Filter – Water Treatment System

A sand filter is a simple and effective water filtration system designed to remove suspended solids, dirt, and impurities from water. It works by passing water through layers of sand and graded gravel, where particles are trapped before the filtered water is collected.

🔹 How It Works

1. Inlet: Unfiltered water enters the filter vessel.

2. Top Diffuser: Distributes water evenly over the sand bed.

3. Sand Bed: Fine sand traps suspended solids and impurities.

4. Gravel Bed: Supports the sand and helps distribute water toward the collection system.

5. Underdrain System: Laterals/strainers collect the filtered water.

6. Outlet: Cleaned water exits the filter.

7. Drain: Used during backwashing to remove accumulated dirt.

🔄 Backwashing Process

Regular backwashing is necessary to maintain filtration efficiency. Water is introduced upward through the underdrain, expanding and loosening the sand bed. The trapped dirt and impurities are then carried out through the top and discharged to waste. After rinsing, normal filtration is resumed.

📏 Typical Filter Media

Sand: Effective size approximately 0.5–1.0 mm

Gravel: Approximately 2–6 mm, arranged in graded layers

🏗️ Typical Applications

Sand filters are commonly used for:

Drinking water treatment

Industrial water treatment

Swimming pools

Irrigation systems

Pre-treatment for RO systems

Key advantages: simple design, low operating cost, easy operation, effective filtration, and reusable filter media through regular backwashing.

Follow CIVIL Tech Time

04/09/2026

Cartridge filter working principle:

A cartridge filter is an efficient filtration device used to remove suspended solid particles, dirt, dust, and other contaminants from liquids or gases. It works by passing the process fluid through one or more replaceable filter cartridges, where unwanted particles are trapped while the clean fluid continues toward the outlet. ⚙️🔬

⚙️ how does a cartridge filter work?

🔹 1. dirty fluid enters
The contaminated liquid or gas enters the filter housing through the inlet connection.

🔹 2. fluid passes through the filter cartridges
The process stream flows through the filter media inside the cartridges.

🔹 3. particles are captured
Solid contaminants are trapped on the surface or within the pores of the filter media, depending on the filtration design.

🔹 4. clean fluid exits
After filtration, the cleaned process fluid flows through the outlet for further processing or use. 💧

🔹 5. cartridge cleaning or replacement
When the pressure drop across the filter increases or the cartridge becomes clogged, the filter element can be cleaned or replaced to maintain efficient operation.

🏭 main components

⚙️ Filter housing
🧪 Filter cartridge / filter element
🔩 Clamp or bolt closure
📊 Vent and pressure gauge connection
➡️ Dirty fluid inlet
💧 Clean fluid outlet
🗑️ Collection area
🔧 Drain connection

🔬 common types of cartridge filters

🔹 Single cartridge filter – Suitable for compact and low-flow applications.

🔹 Multi-cartridge filter – Uses multiple cartridges to handle higher flow rates and provide a larger filtration area.

🔹 Liquid cartridge filter – Designed to remove suspended solids and contaminants from liquids.

🔹 Gas cartridge filter – Used for removing dust and particulate matter from gases and compressed air.

🌍 industrial applications

✅ Water treatment and wastewater treatment
✅ Chemical processing
✅ Pharmaceutical manufacturing
✅ Food and beverage industry
✅ Oil and gas operations
✅ Paint and coating filtration
✅ Boiler feed water systems
✅ Compressed air and gas filtration

⚠️ important operating considerations

📌 Select the correct micron rating for the required filtration level.
📌 Monitor pressure drop across the filter.
📌 Replace or clean cartridges at the recommended operating limit.
📌 Ensure proper sealing to prevent fluid bypass.
📌 Choose filter materials compatible with the process fluid and operating temperature.

Cartridge filters are widely used because they offer high filtration efficiency, compact design, easy maintenance, and flexible filtration options. Proper cartridge selection and regular maintenance are essential for reliable and consistent process performance. 🔧💧⚙️

💬 Which type of cartridge filter do you use in your industry—single, multi-cartridge, liquid, or gas filtration?

04/09/2026

Sand filter working overview:

A sand filter is one of the most widely used and reliable water filtration systems for removing suspended solids, dirt, turbidity, and other physical impurities from water. 💧🔧 It works by passing unfiltered water through carefully arranged layers of filter media, where unwanted particles are trapped and cleaner water is collected.

🔹 1. water enters through the inlet
Unfiltered water enters the vessel and is distributed evenly through the top diffuser.

🔹 2. filtration through the sand bed
As water flows downward through the sand bed, suspended solids and impurities become trapped between the media particles.

🔹 3. gravel support layer
The filtered water then passes through the gravel bed, which supports the sand and helps maintain proper flow distribution.

🔹 4. underdrain collection
The underdrain system collects the filtered water and directs it toward the outlet.

🔹 5. clean water exits
The treated water leaves the filter through the outlet for further treatment or direct use. 🚰

♻️ backwashing process:
Over time, trapped impurities increase the pressure drop across the filter. During backwashing, water flows upward through the underdrain, expanding the sand bed and carrying accumulated dirt and contaminants out through the wash outlet. This restores filtration efficiency.

⚙️ key advantages:
✔️ Simple and reliable design
✔️ Effective removal of suspended solids
✔️ Easy operation and maintenance
✔️ Low operating cost
✔️ Suitable for industrial and municipal water treatment

🏭 Sand filters are commonly used in drinking water treatment, wastewater treatment, industrial process water, cooling water systems, irrigation, swimming pools, and pretreatment systems.

29/08/2026

PLC vs DCS vs SCADA | Complete Industrial Automation Comparison ⚙️ | Control & Instrumentation

22/08/2026
21/08/2026

⚙️ Popular Siemens PLC Models – Which One Should You Choose?

Siemens offers a wide range of PLC platforms designed for applications ranging from simple machine control to large industrial automation systems.

🔹 S7-1200 – A popular choice for small to medium machines, compact automation, and OEM applications.

🔹 S7-1500 – Designed for higher-performance applications, advanced diagnostics, complex machines, and large automation systems.

🔹 ET 200SP CPU – Ideal when you need compact, distributed automation with flexible I/O.

🔹 S7-300 & S7-400 – Legacy PLC families that are still widely encountered in existing industrial plants and retrofit projects.

🔹 LOGO! – Suitable for simple control tasks, small machines, building automation, and basic applications.

Choosing a PLC isn't just about CPU performance. Consider I/O requirements, communication protocols, processing speed, diagnostics, scalability, application complexity, and future expansion.

💡 For beginners: Start with S7-1200 and TIA Portal, then move toward S7-1500 and more advanced automation architectures.

Which Siemens PLC do you work with most often?

Address

Chroy Changvar
Phnom Penh
12000

Telephone

+85589629152

Website

Alerts

Be the first to know and let us send you an email when E&W Supply posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to E&W Supply:

Shortcuts

Share