Jinan All Best Laser Technology Co., Ltd

Jinan All Best Laser Technology Co., Ltd Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Jinan All Best Laser Technology Co., Ltd, Machine Shop, J1, High-tech Wanda office building, Shandong Province, Jinan.

17/08/2026

Plate & Tube Combo Cutter – Square Tube and Sheet Cutting Demo

Square tube and flat sheet – two very different geometries, one machine handling both without compromise.

On square tube:
The rotary chuck grips the tube securely while the cutting head follows the contour of each side. The result is consistent, clean cuts on all four faces—no burrs, no distortion, no secondary cleanup.

On sheet:
The same machine switches to flat sheet mode. The cutting head auto-focuses for the material thickness, and the bed supports the sheet for stable processing. Thin sheets cut fast and stay flat – no burn-through, no warping.

The takeaway:
Two applications. One setup. The machine doesn't care if it's processing tube or sheet – it just delivers clean cuts on both.

DM me "Combo demo" for the full video.

15/08/2026

CNC Press Brake in Action – Precision Bending Demo

A CNC press brake transforms sheet metal with speed and accuracy that manual methods can't match. With ESA S829 CNC control, operators can dial in parameters quickly and get consistent results across batches.

Watch how the machine handles a typical part requiring multiple bends. The CNC back gauge positions automatically between steps – no manual measuring, no layout time. The ram drives to the programmed depth, compensating for material springback.

What you get in the end: parts that come off the bed with consistent angles, ready for assembly. No grinding. No rework. Just clean geometry, bend after bend.

DM me "Press brake demo" for the full video.

Machine packaging and shipping – wrapped, crated, secured, and ready to go.⚡ Corner guards, stretch film, steel strappin...
14/08/2026

Machine packaging and shipping – wrapped, crated, secured, and ready to go.

⚡ Corner guards, stretch film, steel strapping – full protection
⚡ Heavy-duty crating – weatherproof, impact-resistant
⚡ Container loaded – safe transit ahead

Your machine is on its way.

Comment "SHIP" and I’ll send you more shipping photos! 👇

11/08/2026

CNC Press Brake in Action – Precision Bending Demo

Bending repeatable parts demands more than just force—it requires control. The CNC back gauge adjusts automatically between bends, eliminating manual measuring and layout time. A short test piece confirms the angle is spot on before the full run begins.

In this demo, the machine handles a typical part requiring two bends. Within moments, the finished piece comes off the bed—no grinding, no rework, just consistent geometry.

Key advantages:

CNC back gauge eliminates manual setup

Consistent angles on every part

No secondary operations required

DM me "Press brake demo" for the full video.

10/08/2026

6012 Tube Laser Cutter – Round Tube Cutting Demo

The 6012 model is purpose-built for round tube processing. With a clamping range of Φ15mm to Φ120mm, it handles everything from slender profiles to structural pipe .

Key capabilities in this demo:

The pneumatic chuck delivers high clamping force with fast cycle times. The cutting head maintains consistent focus across the tube surface, producing clean edges with minimal burr. With cutting speeds up to 60m/min and positioning accuracy of ±0.03mm, the machine runs efficiently while maintaining precision .

What stands out:

Tail length is minimized to 30mm, reducing material waste . The feed system handles tube loading smoothly, and the cutting process runs in one continuous operation.

Round tube jobs just got faster and cleaner.

DM me "6012 round tube" for the full demo video.

08/08/2026

Semi-Automatic Loading Tube Laser Cutter – Loading & Cutting Demo

Semi-automatic loading bridges the gap between manual handling and full automation. Operators place the tube onto the infeed rack, and the machine's feed rollers take over—automatically pulling the tube into position for cutting.

The real advantage is in the workflow. Single 6-meter tubes load in about 30 seconds, compared to 2 minutes with manual lifting. Operators spend less time handling material and more time running parts.

What you're seeing in this demo:

Operator assists with tube placement

Feed rollers automatically position the tube

Precision cutting with minimal operator intervention

Clean cuts, consistent results

The semi-automatic approach reduces physical strain while maintaining cutting precision. Small-batch shops get the efficiency boost without the full automation investment.

DM me "Semi-auto tube" for the full demo video.

07/08/2026

Fully Automatic Loading Tube Laser Cutter – Hands-Free Production

Manual tube loading is a bottleneck. It slows production, increases labor costs, and introduces handling errors. A fully automatic loading system changes that entirely.

How it works: Bundle-loaded tubes feed automatically into the machine. The system handles separation, alignment, and continuous feeding into the chucks . Once running, operator intervention is minimal.

What it delivers:

The cutting process runs uninterrupted. The machine never waits for material. Simultaneous loading and cutting boosts overall processing efficiency by more than 20% . Loading time drops to around eight seconds per cycle .

The result: Higher throughput, fewer operators, and consistent production across long shifts. From mass production to high-volume tube processing, this is tube cutting without the manual overhead.

DM me "Auto loading tube" for the full demo video.

06/08/2026

Square Tube Drilling & Cutting in One Setup

Square tube processing usually means separate steps – drilling on one machine, cutting on another. That's handling twice, alignment twice, errors twice.

In this demo, the laser cuts the tube to length, drills the holes, and finishes the ends – all in one setup. No repositioning, no alignment drift.

What you're seeing:

Holes placed with ±0.1mm accuracy

Clean cuts on all four sides – no deformation, no burrs

Multiple operations handled through the same clamping

The result: Fewer steps, consistent results, and parts that go straight to welding without rework.

DM me "Square tube demo" for the full video.

04/08/2026

Stainless square tube – handheld laser welding makes it clean and fast.

⚡ Thin walls – no burn-through
⚡ Corners & gaps – one pass, no grinding
⚡ Any angle – torch goes where you need it

Weld comes out smooth. No cleanup needed.

Comment "TUBE" and I'll send you the welding video! 👇

03/08/2026

H-Beam. One machine. Cut, drill, bevel, mark, cope – all in one pass.

⚡ 3-4x faster than traditional
⚡ 15% less material waste
⚡ Clean edges – no grinding needed

One setup. Zero repositioning. Ready for welding.

Comment "HBEAM" and I'll send you the full cutting video! 👇

Address

J1, High-tech Wanda Office Building, Shandong Province
Jinan
250200

Website

Alerts

Be the first to know and let us send you an email when Jinan All Best Laser Technology Co., Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category