Optima Engineering

Call Directions Contact the business

Optima Engineering Engineering updates

🏗️ POST-TENSION (PT) SLAB – Quick Facts🔹 What is a PT Slab?A concrete slab where high-strength steel tendons are stresse...
30/07/2026

🏗️ POST-TENSION (PT) SLAB – Quick Facts

🔹 What is a PT Slab?
A concrete slab where high-strength steel tendons are stressed after the concrete hardens, improving its strength and reducing cracks.

🔹 PT Slab vs RC Slab
✅ PT: Longer spans, thinner slabs, fewer columns, less cracking.
✅ RC: Shorter spans, thicker slabs, more reinforcement.

🔹 Tendon Geometry
📐 Tendons follow a parabolic (curved) profile—high at supports and low at mid-span.

🔹 Advantages
✔️ Longer spans 🏢
✔️ Thinner slabs 📏
✔️ Fewer columns 🏗️
✔️ Better crack control 💪
✔️ Cost-effective for large buildings 💰

Why like this. Comment your ideas below ゚viralシ
30/07/2026

Why like this.
Comment your ideas below
゚viralシ


General guidance for Engineers.How to decide beam size based on the span
30/07/2026

General guidance for Engineers.
How to decide beam size based on the span

Valuable table from Indian standards
10/07/2026

Valuable table from Indian standards

10/07/2026

Anti-Static Epoxy Application: An Overview
Anti-static epoxy (also known as ESD-conductive epoxy) is a specialized flooring system engineered to safely dissipate static electricity. It is designed to prevent electrostatic discharge (ESD) that could damage sensitive electronic components or ignite flammable materials.
The Application Process:
1. Surface Preparation: The substrate is mechanically ground to ensure it is clean, porous, and free of contaminants, providing an ideal profile for adhesion.
2. Priming: A specialized conductive primer is applied to ensure a strong bond between the substrate and the coating.
3. Grounding System: A copper conductive tape grid or a grounding rod is installed, which serves as the pathway for static electricity to exit the flooring to a designated building ground.
4. Conductive Base Coat: A base layer containing conductive fillers (such as carbon or metal fibers) is applied to connect the floor to the grounding system.
5. Topcoat: A high-performance, ESD-rated topcoat is applied. This layer maintains the required surface resistivity while providing chemical and wear resistance.
Hashtags for Maximum Reach

10/07/2026

Colombo lotus tower


03/07/2026

The Secret to Flawless Plastering 🧱✨
Before the smooth finish, comes the critical foundation. To ensure a permanent bond between concrete and plaster, we apply a "Rough Coat" (or spatter dash). This textured layer acts as a mechanical anchor, preventing future cracks and delamination.
Quality isn't just what you see—it's what you do beneath the surface. 🏗️💪

03/07/2026

PT Slab Steel work.

Building the future, one span at a time. 🏗️✨ Precision in engineering is what defines the skyline. From substrate preparation to the final structural finish, quality isn't just a requirement—it’s our signature. 🏙️💎
Stay tuned for more behind-the-scenes looks at high-end urban construction. 👷‍♂️📈

Address

Colombo

Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00
Saturday 09:00 - 17:00
Sunday 09:00 - 17:00

Telephone

0771592473

Website

Alerts

Be the first to know and let us send you an email when Optima Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Optima Engineering:

Shortcuts

Share