Fabric air ducts Texair

18/02/2022

Air ducts for cooling a meat boning room were delivered to a Klin MPC. Due to the facility's compact dimensions, a single air distributor was used that would pass through all three facilities without the use of any coupling tubes.

10/02/2022

The TEXAIR catalog includes a wide range of products for ventilation systems. Including, there are filters for textile air ducts. The standard size range of these filters is represented by models with a filter insert length of 250mm, 500mm, 750mm, 1000mm for diameters from 200mm to 500mm. Air ducts Ø500-1000mm can be equipped with a duct filter with a filter insert 500mm, 750mm, 1000mm, 1250mm, 1500mm, 1750mm, 2000mm long. For air ducts larger than Ø1000mm, filters are made to order.

According to the degree of purification, they belong to fine filters, and are recommended for installation in ventilation systems with coarse air purification (degree G1, G2, G3, G4). According to the cleaning class, they are divided into five degrees - F5, F6, F7, F8, F9.

Separately, I would like to draw attention to cases where the unit incorporates an F5 or F7 fine filter, but the operating conditions require an F9 air purification class. Installing a channel filter in this case can save the situation with little blood. This primarily concerns medical institutions.

The initial difference pressure drop across the filter depends on the specific flow rate of air passing through the filter material and the throughput of the material itself. The throughput of the material, as a rule, decreases with an increase in the cleaning class. Other things being equal, class F5 filter inserts may be shorter than class F9. The recommended initial air pressure drop across the filter is 10-100Pa. The final pressure drop for a clogged filter should not exceed 450Pa.

TEXAIR produces filters in four modifications:

• Basic
• With differential pressure gauge MINIHELIC
• With differential pressure sensor
• Three previous modifications, but for installation on metal air ducts (with two connections)

The design of the filter excludes the ingress of unfiltered air into the textile air duct, and, accordingly, into the working area of the facility with textile air distribution systems. Ideally, each air distribution system needs a filter of a certain length and class of purification, depending the environment in the area where the facility is located and the requirements for clean air in the working area. However, in reality, you can use the standard size range presented at the beginning, choosing the model that is most suitable for the conditions.

07/02/2022

At the beginning of 2022, TEXAIR air ducts were installed in the workshop for the preparation of semi-finished products of Vostochny LLC.

Project details:

• Air duct type, system purpose: supply air, ventilation/cooling.
• Duct shape: circle
• Airflow, static pressure: 10600 m³/h (total, 6 ducts), 100-250 Pa
• Duct length: 100 m (total)
• Fabric: TEX-Sti (Staпdard lmpermeble): air impermeable polyester 100%
• Supply air temperature: +8 ° C to +18 ° C
• Air distribution: even distribution throughout the whole room
• Installation height (from floor to duct axis): 3000-5000 mm

Information about the customer: Vostochny is a full-cycle meat company, the largest enterprise in the Udmurt Republic with a full technological cycle from reproduction to slaughter and meat processing. It is part of the agro-industrial holding KOMOS GROUP. The structure of the company includes three pig farms, a feed elevator and two meat processing plants. The company employs 1500 people. Vostochny takes the 25th place in the rating of Russian pig farms in terms of pork production. It produces more than 40 thousand tons of pork per year (in live weight), produces more than 15 thousand tons of finished meat products. The company's brand is known not only in Udmurtia. The company's products are successfully sold in 35 regions of Russia, including abroad. Vostochny is a major employer and taxpayer in Udmurtia, the only enterprise in Udmurtia that works with raw materials of its own production, which means that the consumer always receives only fresh and high-quality products in accordance with GOST!

03/02/2022

At the beginning of 2022, TEXAIR air ducts were installed at the processed cheese factory of the President brand, which is one of the enterprises of the world famous company Lactalis.

Project details:

• Air duct type, system purpose: supply air, ventilation/c.
• Duct shape: circle
• Airflow, static pressure: 11000 m³/h (total, 4 ducts), 100-250 Pa
• Duct length: 156m (total)
• Fabric: TEX-Sti (Staпdard lmpermeaЫe): air impermeaЫe polyester 100%
• Supply air temperature: +8 ° C to +18 ° C
• Air distribution: even distribution throughout the whole room
• Installation height (from floor to duct axis): 3000-5000mm

01/02/2022

Before the TEXAIR textile air ducts are finally sewn into finished products, the fabric components prepared according to design calculations come from the laser cutting shop with the appropriate dimensions and perforation holes. Then comes the final stage of production, when our highly qualified seamstresses complete the assembly of air ducts, and the products go to quality control.

28/01/2022

One of the most important areas of application of TEXAIR textile air ducts is modern technological greenhouse facilities, equipped at the level of the most advanced standards of current agricultural production. TEXAIR usually has several such projects in the works. The photo shows several relatively thin perforated ducts with built-in assembly guids for mounting on profiles.

24/01/2022

Textile air ducts TEXAIR, among other things, have one remarkable feature - this is the possibility of applying graphics to the fabric surface of the air duct. This is necessary in order to fit the design of the duct into the overall design of the room and to focus on one or another visual aspect. Many TEXAIR duct customers take advantage of this option and order products with their company logo, giving the product an element of corporate identity.

20/01/2022

One of TEXAIR's current projects: the production of an air duct with inserts made of highly permeable TEX-HP (Highly Permeable) fabric for installation in a fish products workshop. Air ducts of this design are used in order to ensure the distribution of a large volume of air at a low speed. In this case, the design parameters are a static pressure of 100 Pa at an air flow rate of 0.5 m/s at a distance of one meter from the duct surface.

Typically, such air ducts are needed in small areas where it is necessary to distribute a large volume of air. For example, in small food industries that need refrigeration. It is inefficient to perforate the duct under such conditions because the number of holes exceeds the maximum number for the one duct sector, and therefore the impermeable fabric duct construction with high permeability fabric inserts is used. Thus, TEXAIR fabric ducts can be suitable for absolutely any task.

18/01/2022

Perforation is one of the most important design elements of textile air ducts, since it is perforation that has a direct impact on such an important parameter as the air supply rate, which is one of the main design criteria in the project of air ducts. Accordingly, the number, size and location of perforations are carefully calculated on a case-by-case basis, depending on the customer's needs.

17/01/2022

There is the middle of winter, and there is a lot of white snow on the continent. Perhaps in connection with this, we have increased orders for white air ducts. We remind you that you can choose any of the eleven basic colors (white, beige, yellow, orange, black, red, light gray, green, light blue, dark gray, blue), or order some of your own special color options.

24/12/2021

22/12/2021

Don't you know what color of the fabric air ducts is one of the most popular within TEXAIR's customers? The blue one!