J&K HDPE Lining and Construction

24/03/2025

Kerja-kerja di minggu akhir ramadan sebelum kami bercuti sempena aidilfitri.

12/03/2025

The refurbishment work on the water tank has been successfully completed at Sekolah Agama Padang Jawa.👍👍

If you require our services, you can contact us 013-986 8215 or 018-2524734 (Mr.Kamal) for more information.

Why spend more on a new tank? We refurbish your existing one for durability, efficiency, and savings

05/12/2024

The refurbishment work on the water tank has been successfully completed at Istara Condominium, Petaling Jaya.👍👍

If you require our services, you can contact us 013-986 8215 or 018-2524734 (Mr.Kamal) for more information. There's no need to replace the tank with a new one,we only refurbish the existing tank at a reasonable price.

05/07/2024

Scope of work :

Installation 2mm HDPE Lining for Pressed Steel Tank at SRA Sementa, Klang.

Completed !! 🤝🤝💪💪

20/05/2024

Gambaran sebenar keadaan di dalam tangki air yg tidak di cuci dan tidak melakukan kerja-kerja penyelenggaraan sekurang-kurangnya 1 tahun sekali.

Terutamanya rumah jenis "High-Rise Building" yang banyak menggunakan tangki air seperti ini. Sudahkan pihak JMB di tempat anda telah melakukan penyelenggaraan tangki air?

11/01/2024

Scope of work :

Installation 2mm HDPE Lining for Suction WaterTank at Bandar Saujana Putra.

Completed !! 🤝🤝💪💪

20/12/2023

Thank you for your feedback. Our team will improve all the shortcomings to be better in the future!! 💪💪💪

01/12/2023

Scope of work :

Supply and install 3m x 2m x 2m (H) Fibre Reinforce Plastic (FRP) Watertank at Bandar Saujana Putra.

Completed !! 🤝🤝💪💪

10/10/2023

A. Hot Wedge Double Fusion Welding

The primary type of welding equipment used today for welding of polyethylene panels is the hot wedge double fusion welding system. It provides an excellent welding consistency by reducing human error and error caused by fatigue, this self-propelled hot
wedge welder is used to weld long continues seams and can travel at speeds of three (3) to five(5) meters per minute. The unit contains a high temperature split wedge used to melt the plastic along the weld lines on the overlapped panels. The liner panels are then squeezed together by pressure rollers so that the two sheets fuse together

B. Extrusion Welding

The extrusion welder provides heat and an extrudate of molten plastic made from the same material as the sheet. The molten plastic is deposited over the edge of two surface to be welded. The surface to be welded are tacked together at overlap to form a
temporary bond prior to welding. The area to be used for welding will then be grinned.



to provide a roughened surface for the extrudate to better adhere to the surface.

10/10/2023

Scope of work :

Supply and install new 2.0mm HDPE Geomembrane in RC suction watertank at Bandar Country Home, Rawang

Completed !! 🤝🤝💪💪

17/07/2023

Scope of work :
Repair and cleaning Fibreglass Reinforce Plastic (FRP) watertank at Petaling Jaya Condominium.

The client is very satisfied !! 🤝🤝💪💪👍👍

07/06/2023