KJ Kobewel SDN BHD

Call Directions Contact the business

KJ Kobewel SDN BHD Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from KJ Kobewel SDN BHD, 26, Jalan Rosmerah 2/17, Taman Johor Jaya, Johor Bahru.

KJ KOBEWEL SGN BHD
SSM: 202001016368(1372688-M)
KJ Kobewel Sdn Bhd represent full range of highest quality standards Kobewel Welding and Cutting products including Machines, Accessories, Welding Consumable, Retail division, and Service & Support.

⚡ CHOOSING A PLASMA CUTTER? START WITH YOUR JOB.The right setup depends on what you cut, the results you need and what y...
14/11/2026

⚡ CHOOSING A PLASMA CUTTER? START WITH YOUR JOB.
The right setup depends on what you cut, the results you need and what your workshop can support.
Swipe through our guide to explore:
🔹 Material type, usual thickness and occasional maximum thickness
🔹 Electrical supply, compressed-air requirements and cutting workload
🔹 The details to share when asking for equipment advice
💡 Recommended cutting capacity and maximum severance are different. A machine may separate thicker metal at a slower speed with a rougher edge—so consider your everyday cutting requirements when comparing equipment.
Featuring the Kobewel CUT 120AP, our enquiry checklist helps you prepare for a more useful discussion with KJ Kobewel.
Tell us your material, thickness, application and expected finish, along with your available power and compressor details. A workpiece photo helps too!
📌 Save this guide for your next equipment enquiry.
📲 WhatsApp: +60 12-766 8686
KJ Kobewel Sdn Bhd
One SOURCE for All Your Needs.

⚡ GOOD PLASMA CUTTING STARTS WITH A GOOD SETUP.Knowing what plasma cutting does is the first step. Understanding how the...
11/11/2026

⚡ GOOD PLASMA CUTTING STARTS WITH A GOOD SETUP.
Knowing what plasma cutting does is the first step. Understanding how the equipment works together helps you prepare for the job.
In this guide, we take a closer look at:
🔹 The cutting setup—power source, torch, air supply and work clamp
🔹 How the arc melts metal and moving gas clears it away
🔹 Essential checks before cutting begins
Featuring our Kobewel CUT 120, the setup illustration shows how the main equipment fits together. Always follow your machine’s manual for exact connections and operating requirements.
Before you start, check your work connection, air supply, consumables and settings. Suitable protective equipment, ventilation and a clear work area matter too.
📌 Save this guide for reference alongside your equipment manual.
Need help with your plasma cutting setup? Tell us your machine model, material and thickness.
📲 WhatsApp: +60 12-766 8686
KJ Kobewel Sdn Bhd
One SOURCE for All Your Needs.

⚡ MEET PLASMA CUTTING — THE ARC MELTS. THE GAS CLEARS.How does a plasma torch cut through metal? 🤔Plasma is an electrica...
09/11/2026

⚡ MEET PLASMA CUTTING — THE ARC MELTS. THE GAS CLEARS.
How does a plasma torch cut through metal? 🤔
Plasma is an electrically energised gas that conducts electricity. During cutting, the plasma arc melts the metal while fast-moving gas blows the molten material away—creating a cut.
It works on electrically conductive metals such as mild steel, stainless steel and aluminium. Cutting capability depends on the equipment and material thickness.
Swipe through our beginner-friendly guide to discover:
🔹 What plasma cutting is and how it works
🔹 The plasma torch’s main components and their roles
🔹 Applications in fabrication, sheet-metal work, repairs and everyday workshop tasks
From preparing blanks before welding to cutting openings in panels, plasma cutting helps turn metal into parts for your next job.
📌 Save this guide for your workshop reference.
Have a metal-cutting job in mind? Tell us your material, thickness and application—we’ll help you explore a suitable setup.
📲 WhatsApp: +60 12-766 8686
KJ Kobewel Sdn Bhd
One SOURCE for All Your Needs.

🪔✨ Happy Deepavali from KJ KOBEWEL! ✨🪔This Festival of Lights, we celebrate the values that brighten every journey — hop...
08/11/2026

🪔✨ Happy Deepavali from KJ KOBEWEL! ✨🪔
This Festival of Lights, we celebrate the values that brighten every journey — hope,
prosperity, craftsmanship, and togetherness.
Just as precision and skill shape metal into something strong and lasting, may this Deepavali
bring light to your path, success to your business, and joy to your family.
From all of us at KJ KOBEWEL SDN BHD, we wish you a meaningful and prosperous
Deepavali filled with happiness, peace, and brighter opportunities ahead.
KJ KOBEWEL — Stronger Welds, A Brighter Tomorrow.
📞 WhatsApp: +60 12-766 8686
📘 Facebook: KJ Kobewel Sdn Bhd


🔥 CHOOSE THE RIGHT TORCH. MATCH THE RIGHT NOZZLE.Buying a cutting nozzle? Start with your fuel gas, torch compatibility ...
07/11/2026

🔥 CHOOSE THE RIGHT TORCH. MATCH THE RIGHT NOZZLE.

Buying a cutting nozzle? Start with your fuel gas, torch compatibility and steel thickness.

Swipe through our four-flyer guide:
🔹 Choosing a cutting torch for your job
🔹 ANME vs PNME—understanding fuel-gas compatibility
🔹 PNME 9 vs PNME 18—what the preheat groove numbers mean
🔹 Matching nozzle size to cutting thickness

Remember: PNME 18 does not mean “cuts 18 mm.” Preheat design and cutting size are separate specifications. Always check the manufacturer’s chart for your nozzle series.

Not sure which nozzle fits? Send us your:
✅ Fuel gas type
✅ Steel thickness
✅ Torch model or clear photos
✅ Application—hand or machine cutting

📌 Save this guide for your next equipment enquiry.

📲 WhatsApp: +60 12-766 8686
📘 Facebook: KJ Kobewel Sdn Bhd

KJ KOBEWEL — One SOURCE for All Your Needs.

🔥 SMALL COMPONENT. IMPORTANT PROTECTION.When using oxy-fuel equipment, safety matters at both the cylinders and the torc...
06/11/2026

🔥 SMALL COMPONENT. IMPORTANT PROTECTION.

When using oxy-fuel equipment, safety matters at both the cylinders and the torch.

A **flashback arrestor helps stop a flame travelling backwards through the gas line**, helping protect your equipment and the people working around it.

📍 **Regulator-mounted:** Between the regulator outlet and the hose.
📍 **Torch-mounted:** Between the hose and the torch inlet.

Oxygen and fuel gas need their own suitable devices. Always match the gas, mounting position, connections and flow capacity, and follow the manufacturer’s installation instructions.

⚠️ Reverse gas flow can create an explosive mixture inside a hose. A flashback can damage hoses and regulators and, in severe cases, reach the cylinder.

Correct pressures, suitable nozzles, equipment checks and safe operating procedures all matter. **Flashback arrestors add protection—they do not replace safe working practices.**

Unsure which arrestor suits your setup? Send us a photo of your equipment and its model details.

📲 WhatsApp: +60 12-766 8686
📘 Facebook: KJ Kobewel Sdn Bhd

**One SOURCE for All Your Needs.**

🔥 A GOOD CUT STARTS BEFORE THE FLAME.From steel plate cutting to fabrication and workshop repairs, understanding your ox...
05/11/2026

🔥 A GOOD CUT STARTS BEFORE THE FLAME.

From steel plate cutting to fabrication and workshop repairs, understanding your oxy-fuel equipment is part of preparing for the job.

Swipe through our guide to explore:
🔹 Common oxy-fuel cutting applications
🔹 Equipment and work-area checks before cutting
🔹 Regulator-mounted and torch-mounted flashback arrestors

Check your gas identification, equipment condition and connections. Prepare the work area, wear suitable protection and follow your equipment manufacturer’s instructions.

Small components deserve attention too—choose flashback arrestors suited to the gas, flow requirements and mounting position.

📌 Save this guide for your workshop team.
Need help choosing equipment or accessories? Contact us.

📲 WhatsApp: +60 12-766 8686
📘 Facebook: KJ Kobewel Sdn Bhd

KJ KOBEWEL — One SOURCE for All Your Needs.

🔥 KNOW YOUR OXY-FUEL CUTTING SYSTEMA good cut starts with understanding your equipment. Whether you’re learning the basi...
03/11/2026

🔥 KNOW YOUR OXY-FUEL CUTTING SYSTEM

A good cut starts with understanding your equipment. Whether you’re learning the basics or choosing equipment for your workshop, get to know the parts that work together.

Swipe through our flyers to explore:
🔹 The basics of oxy-fuel cutting
🔹 Key equipment—from gas cylinders and regulators to hoses, flashback arrestors and the cutting torch
🔹 Cutting torch components and their functions

Working with mild steel? Tell us your cutting thickness and fuel gas—we’ll help you choose suitable equipment and nozzles.

📲 WhatsApp: +60 12-766 8686
📘 Facebook: KJ Kobewel Sdn Bhd

KJ KOBEWEL — One SOURCE for All Your Needs.

🎃🔥 HAPPY HALLOWEEN FROM KJ KOBEWEL! 👻⚡FORGED IN FIRE, BUILT TO LAST! 🔥This Halloween, we're bringing a little spooky cre...
31/10/2026

🎃🔥 HAPPY HALLOWEEN FROM KJ KOBEWEL! 👻⚡
FORGED IN FIRE, BUILT TO LAST! 🔥
This Halloween, we're bringing a little spooky creativity into the welding workshop! 🎃🔧
From glowing steel pumpkins to precision welds, even the spookiest creations begin with
skill, craftsmanship, and a strong weld.
Because at KJ KOBEWEL, we believe that quality craftsmanship never goes out of style
— not even on Halloween! 💪⚙️
Wishing everyone a Happy Halloween filled with creativity, excitement, and a little spark of
inspiration! 🦇🌕
KJ KOBEWEL — STRONGER WELDS, A BRIGHTER TOMORROW.
📞 WhatsApp: +60 12-766 8686
📘 Facebook: KJ Kobewel Sdn Bhd


GOOD WELDING STARTS BEFORE THE ARC.Knowing the differences between MIG/MAG, TIG and ARC/MMA is the beginning. The nextst...
30/10/2026

GOOD WELDING STARTS BEFORE THE ARC.
Knowing the differences between MIG/MAG, TIG and ARC/MMA is the beginning. The next
step is applying that knowledge to your workshop’s actual requirements.
To complete our October “Know Your Welding Process” series, this guide takes you through
three practical stages:
▪ UNDERSTAND THE JOB
Identify the material, check both pieces’ thicknesses, and understand the joint, alignment
and intended use.
▪ PLAN THE SETUP
Follow a mild-steel bracket example to understand how the process, consumables, machine
capability and preparation work together.
▪ CHECK BEFORE PRODUCTION
Use a representative test piece, review visible imperfections, check dimensions and record
the accepted setup. A neat-looking weld alone does not confirm its strength or internal
quality—follow the job’s required inspection and testing procedures.
Swipe through for clear explanations you can refer to when planning your next welding job.
Save this guide for your workshop team.
Need help choosing suitable welding equipment and consumables? Send us your material,
thickness, application and available power supply.
WhatsApp: +60 12-766 8686
KJ Kobewel Sdn Bhd
One SOURCE for All Your Needs.

Address

26, Jalan Rosmerah 2/17, Taman Johor Jaya
Johor Bahru
81100

Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00
Saturday 09:00 - 12:00

Telephone

+6073541888

Website

Alerts

Be the first to know and let us send you an email when KJ Kobewel SDN BHD posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to KJ Kobewel SDN BHD:

Shortcuts

Share

Nearby engineering companies