Tsubaki Power Transmission - Malaysia

23/07/2026

https://www.facebook.com/TsubakiChain/posts/1753636472906439

【Series: Environmentally Resistant Chain – Part 4】

Need corrosion resistance in outdoor, saltwater, or weather-exposed environments without reducing chain strength?

Tsubaki’s Surface Treated Chain NEP Series, also known as NEPTUNE, is an RS roller chain with special coating and special resin coating.

Key features:
✅ Excellent corrosion resistance in saltwater, weather, chemicals, and other environmental conditions
✅ Same tensile strength and allowable tension as standard steel RS roller chain
✅ No rust after 1,000 hours in salt spray testing under JIS Z 2371
✅ RoHS compliant and free of harmful hexavalent chromium in anti-rust surface treatment

The NEP Series is suitable for outdoor equipment, coastal environments, and applications exposed to water droplets.

🔽 Learn more about the Surface Treated Drive Chain NEP Series:
https://en.tt-net.tsubakimoto.co.jp/tecs/pdct/cdc/pdct_CNEP.asp?utm_source=facebook&utm_medium=social&utm_campaign=pt_sns_env_resistant_chain&utm_content=20260723_product_image1_env_resistant_chain_series04_nep_spec

Thank you for following this 4-part series.
See the full lineup here:
https://www.facebook.com/TsubakiChain/posts/pfbid02efEq54UDRor4oBcgRvGLZnC5iY81rrijwe8V2Z9GDhoF7arKgN2JsVjQKhMiCNdWl

21/07/2026

https://www.facebook.com/TsubakiChain/posts/1752682889668464

【Series: Environmentally Resistant Chain – Part 1】

Are corrosion, wear elongation, or frequent chain replacement becoming an issue in wet, corrosive, or outdoor environments?

Tsubaki offers a wide lineup of Environmentally Resistant Chains to suit different operating conditions, including corrosion resistance, allowable load, temperature range, and maintenance requirements.

This is the first post in a 4-part series. In the following posts, we will introduce three key specifications:

🔹 Part 2: Stainless Steel Chain SS Series:
https://www.facebook.com/TsubakiChain/posts/pfbid02FCbNkfhqkMHTHXmHba99fXUy7xbjKRS2TK8v3h1KLCgrC11cab6sremzZgfCMd3el

For applications requiring high corrosion resistance, resistance to both high and low temperatures, and sanitary performance.

🔹 Part 3: Stainless Steel Chain HS Series:
https://www.facebook.com/TsubakiChain/posts/pfbid0SdVyHKV6DtmtkDu8v9EYax9s3Q3nubZY1YzzhjYzoAt2AFDKUmMf6qsPv7SShD9xl

For applications requiring higher maximum allowable load than SS Series while maintaining corrosion resistance.

🔹 Part 4: Surface Treated Chain NEP Series:
https://www.facebook.com/TsubakiChain/posts/pfbid03MSnVB6FZK5fSeD2AZYNyXPxJrpkfkCWjHSZN5pJwdhxRZ9i4g931bHS4HyaPsR8l

For outdoor, saltwater, and weather-exposed environments where RS roller chain strength is also required.

Other specifications, such as NS Series, Poly-steel Chain, Titanium Chain, and NP Series, are also available depending on the operating environment.

🔽 Learn more about the full lineup:
https://en.tt-net.tsubakimoto.co.jp/tecs/pdct/cdc/feat/pdct_feat_cdc_CTKK.asp?utm_source=facebook&utm_medium=social&utm_campaign=pt_sns_env_resistant_chain&utm_content=20260716_product_image1_env_resistant_chain_series01

21/07/2026

https://www.facebook.com/TsubakiChain/posts/1753635176239902

【Series: Environmentally Resistant Chain – Part 2】

High corrosion resistance with the Stainless Steel Chain SS Series.

Tsubaki’s Stainless Steel Chain SS Series is made of 18-8 stainless steel and is suitable for corrosive atmospheres such as underwater, acidic, and alkaline environments.

Key features:
✅ High corrosion resistance compared with RS roller chains and RS coated chains
✅ Wide operating temperature range: -20°C to 400°C
✅ For applicable sizes upgraded in October 2022, seamless bushes improve wear life and maximum allowable load compared with the SS Series before the upgrade.

The SS Series is suitable for applications where corrosion resistance, resistance to both high and low temperatures, and sanitary performance are important, such as food machinery and chemical-related equipment.

🔽 Learn more about the Stainless Steel Drive Chain SS Series:
https://en.tt-net.tsubakimoto.co.jp/tecs/pdct/cdc/pdct_CSS.asp?utm_source=facebook&utm_medium=social&utm_campaign=pt_sns_env_resistant_chain&utm_content=20260721_product_image1_env_resistant_chain_series02_ss_spec

Missed Part 1?
https://www.facebook.com/TsubakiChain/posts/pfbid02efEq54UDRor4oBcgRvGLZnC5iY81rrijwe8V2Z9GDhoF7arKgN2JsVjQKhMiCNdWl

Next: HS Series, for applications requiring higher maximum allowable load than SS Series.

16/07/2026

https://www.facebook.com/share/v/1DDmm7i15R/

08/07/2026

https://www.facebook.com/TsubakiChain/posts/pfbid02UfshWKZiCBJFtC3tvPpQtMg1LS3oUnowuMmSVm2wYrnxwMCC7KhLCu8t5pLKEGF2l

🔎 Solution Case Study: Reduced particle generation and improved safety for collaborative robot traversal sections in clean rooms.

In wafer manufacturing equipment, particles generated by the plastic Cable Carrier (CABLEVEYOR) systems themselves, as well as by the cables and tubing, had been a cause for concern.
Therefore, to address this issue, FLATVEYOR ZP Type was adopted, allowing cables and tubing to be housed within an openable PVC tube.
This not only addresses the particle generation issue of previous models but also improves the manufacturing environment and product yield.

💡 Adopted products
Cable Carrier (CABLEVEYOR) FLATVEYOR ZP Type

This is a freestanding flat cable system with Tsubaki's originally designed openable tube and support member, using PVC tubes that are flexible, durable, and have good sliding properties.
Achieving ISO Class 1 cleanliness contributes to improved yield.

View the full solution case study:
👉 https://en.tt-net.tsubakimoto.co.jp/info/solution/0094?utm_source=facebook&utm_medium=social&utm_campaign=pt_sns_cable_carrier&utm_content=20260708_case_image1_flatveyor_zp

View the product details:
👉 https://en.tt-net.tsubakimoto.co.jp/tecs/pdct/ccv/pdct_CVFVZP.asp?utm_source=facebook&utm_medium=social&utm_campaign=pt_sns_cable_carrier&utm_content=20260708_case_image1_flatveyor_zp

07/07/2026

https://www.facebook.com/TsubakiChain/posts/pfbid02aVzKEYarataVk6FefYBVc8YNDd6H34UzzBJ6cHiDA9ArM2nqWFxZLe8cZVy4vhh4l

Are you designing for corrosion… or just accepting it?

500 hours.
No red rust.

Tsubaki’s PDU High Anti-Rust Specification is engineered to perform in harsh coastal and corrosive environments.
✅ No red rust after 500 hours of salt spray testing*
✅ Ideal for outdoor conveyors and coastal plants
✅ Designed for long-term reliability

If corrosion is a concern in your application, let’s connect.

Learn more:
👉 https://en.tt-net.tsubakimoto.co.jp/tecs/pdct/cdc/pdct_CPDU.asp?utm_source=facebook&utm_medium=social&utm_campaign=pt_sns_pdu&utm_content=20260707_product_image1_pdu

*Based on in-house test results.

01/07/2026

https://www.facebook.com/reel/2347828099080574/

26/06/2026

https://www.facebook.com/TsubakiChain/posts/pfbid0bNmQBUqi7epDzXu5CMpdbezLw93Ro716H3cdGWm8vmoCZGcvFo8dz14pozuEEKynl

🔎 Tsubaki Case Study: Miter Gear Box in Pipe-Forming Equipment

Here is a case study of Tsubaki’s Miter Gear Box used in the drive unit of pipe-forming equipment.
The equipment originally used multiple motors, creating several challenges:
⚠️ A large space was required for the drive unit.
⚠️ Control devices and wiring became more complex.
⚠️ Design, maintenance, shaft alignment, and readjustment work became more burdensome.
To address these issues, Tsubaki’s Miter Gear Box was adopted.

💡 What is a Miter Gear Box?
A Miter Gear Box is a right-angle spiral bevel gearbox that changes the direction of power transmission by 90°. It can also distribute power horizontally or vertically, helping simplify multi-axis drive layouts.

By reducing the number of motors and simplifying the drive configuration, the customer was able to achieve:
✅ A more compact drive unit
✅ Simpler wiring and control configuration
✅ Reduced design, assembly, and maintenance work

Discover the full story:
👉 https://en.tt-net.tsubakimoto.co.jp/info/solution/0122?utm_source=facebook&utm_medium=social&utm_campaign=pt_sns_reducers&utm_content=20260625_case_image1_miter_gear_box

24/06/2026

https://www.facebook.com/TsubakiChain/posts/pfbid02xa2sFnKStkRB6386yTXEndnTLhPsyFWVgyNF82r3ShSovQLeHyAoVqMxK5JnSPPHl

Product Spotlight: Tsubaki Tray Packer Chain (Lambda Chain)

✅ Long life in a lubrication-free environment
Tsubaki Lambda Chain can meet customer needs for long life in a lubrication-free environment, resulting in a reduction in overall long-term costs.

✅ Interchangeable with current tray packing systems
Interchangeable with the chain in your current tray packing system, allowing replacement with a lube-free chain.

✅ NSF H1 compliant lubricant
Lambda Chain uses NSF H1 compliant lubricant, making it suitable for food machinery applications.

Learn more:
https://en.tt-net.tsubakimoto.co.jp/tecs/pdct/csc/pdct_csc_3csmk.asp?utm_source=facebook&utm_medium=social&utm_campaign=pt_sns_small_conveyor_chain&utm_content=20260623_product_image1_lambda_chain

18/06/2026

https://www.facebook.com/TsubakiChain/posts/pfbid02ktP4uaiBUsfxb5V4tZG4voWkcxDxcb1jLMhFSFzCbjyKR5ixitM1NXYkE9ZMtUvbl