ITIS (Industrial Testing & Inspection Services)

ITIS (Industrial Testing & Inspection Services) ITIS is an independent technical service company and has expert knowledge and experience to provide: Leak Testing, Valve Testing, NDT and Inspections.

A valve can pass a factory test and still fail in real operation.Because real conditions such as pressure, temperature, ...
05/05/2026

A valve can pass a factory test and still fail in real operation.

Because real conditions such as pressure, temperature, dynamic loads expose what standard tests miss.

At ITIS, we test components under realistic conditions to verify leak tightness and performance before deployment.

In our monthly newsletter, we share cases, field insights and lessons from components under stress.

No theory. Just results.

Want to stay ahead of failure risks?

Subscribe via https://itis-nl.com or send us a DM to be subscribed.

Years of experience with the same valves. Never a problem. Until the test showed something unexpected.Read our blog here...
24/04/2026

Years of experience with the same valves. Never a problem. Until the test showed something unexpected.

Read our blog here: https://www.itis-nl.com/nieuws/

Do you know for certain your valves meet the emission requirements in your permit? Not based on what the supplier says, ...
21/04/2026

Do you know for certain your valves meet the emission requirements in your permit? Not based on what the supplier says, but provably. We test them independently, accredited under ISO 17025.

https://itis-nl.com/fugitive-emission-test

Fugitive emissions might be small, but together they can lead to serious environmental and safety risks.The challenge is...
13/04/2026

Fugitive emissions might be small, but together they can lead to serious environmental and safety risks.

The challenge is that you usually don’t see them. That’s why we test valves, seals and flanges using highly sensitive methods with helium or methane, so even the smallest leaks don’t go unnoticed.

Want to know how your equipment is really performing?

We’re happy to take a closer look and test it for you.

A valve failure during a fire can be catastrophic. That is why fire safe certification exists and why the testing behind...
03/04/2026

A valve failure during a fire can be catastrophic. That is why fire safe certification exists and why the testing behind it is so important.

At ITIS, we test valves under extreme heat conditions to prove they keep working when it matters most. We check whether seals hold, whether the valve can still be operated and whether hazardous substances can escape. If it passes, you know it is built to perform in a real emergency.

This is not just a certificate on the wall. It is proof that your installation is protected.

Want to know more about what fire safe testing involves? We explain it here: https://www.itis-nl.com/fire-safe-test-2/?lang=en

Did you know?During a fire safe test, valves and gaskets are exposed to extreme heat to check whether they can still sea...
31/03/2026

Did you know?

During a fire safe test, valves and gaskets are exposed to extreme heat to check whether they can still seal and operate during a fire.
Sounds intense? It is.

Necessary? Absolutely!

Want to know what a fire safe test looks like? We’ll show you at https://www.itis-nl.com/fire-safe-test/

Stap in de wereld van techniekOp zaterdag 20 september openen wij samen met vijf andere technische bedrijven onze deuren...
10/09/2025

Stap in de wereld van techniek

Op zaterdag 20 september openen wij samen met vijf andere technische bedrijven onze deuren. Bij ITIS kunt u van dichtbij zien hoe industriële testen worden uitgevoerd. Daarnaast zijn er demonstraties op het gebied van machinebouw, robotica en autotechniek.

Datum: zaterdag 20 september
Tijd: 10.00 – 15.00 uur
Locatie: De Poel II, Goes
Toegang: gratis

Een mooie gelegenheid om te zien en te beleven wat techniek in de praktijk inhoudt.

Aankondiging Open Dag ITISOp zaterdag 20 september opent ITIS samen met andere bedrijven op bedrijventerrein De Poel II ...
03/09/2025

Aankondiging Open Dag ITIS

Op zaterdag 20 september opent ITIS samen met andere bedrijven op bedrijventerrein De Poel II in Goes de deuren voor het publiek. Tussen 10:00 en 15:00 uur zijn alle geïnteresseerden welkom om kennis te maken met ons ISO 17025-geaccrediteerde testlaboratorium.

Beleef van dichtbij hoe wij industriële afsluiters testen onder extreme omstandigheden, zoals Fire Safe (vuurbestendigheidsproeven), cryogene beproevingen met vloeibare stikstof en hoge-druktesten. Onze specialisten geven uitleg en laten zien waarom ons motto luidt: “You’re never sure unless ITIS tested.”

Er is een rondleiding, een hapje en een drankje: een leerzaam en leuk uitje voor jong en oud!

📍 Locatie: ITIS, Columbusweg 65, Goes (De Poel II)
🗓 Datum: Zaterdag 20 september | Tijd: 10:00 – 15:00 uur

Adres

Columbusweg 64
Goes
4462HB

Meldingen

Wees de eerste die het weet en laat ons u een e-mail sturen wanneer ITIS (Industrial Testing & Inspection Services) nieuws en promoties plaatst. Uw e-mailadres wordt niet voor andere doeleinden gebruikt en u kunt zich op elk gewenst moment afmelden.

Contact

Stuur een bericht naar ITIS (Industrial Testing & Inspection Services):

Delen