WHAT IS AN EXTREME BEARING? Extreme Bearing housings are made of stainless steel 316 with a double row of rollers and a special seal. They are a better choice for applications where traditional bearings quickly become worn down by heavy load, rust, soiling, dust, chemicals and the penetration of water. Extreme Bearings are designed for tough and wet corrosive environments involving heavy loads such as on conveyors, wash drums and graders in potato and seafood processing factories. Thanks to the excellent seals, Extreme Bearings are also very suitable in dry places where there is a lot of dust in combination with heavy bearing loads such as in mining and the extraction of sand on sorting equipment, conveyors and crushers. Technical features:
The housing is made of stainless steel 316. The bearing unit is interchangeable with most known brands of housing and can therefore be used in existing operating machinery. Self-aligning, double row ball bearings to handle high radial and thrust loads. Particularly suitable in harsh conditions and where agressive media is used. SS 316 has a very high resistance to chemicals and sea water. Standard bearing insert, so a replacement bearing insert can be found anywhere in the world. IP66: water projected in powerful jets against the enclosure from any direction shall have no harmful effects. The bearings are very easy to clean. Rounded corners and smooth surfaces both at the front and reverse side do not encourage the build-up of dirt or the growth of microorganisms. Extreme Bearing housings are available in shaft diameters from 25 to 100 mm.
