28/05/2026
๐ ๐ฑ ๐บ๐ถ๐ฐ๐ฟ๐ผ๐ป ๐ณ๐ถ๐น๐๐ฒ๐ฟ ๐ฐ๐ฎ๐ป ๐๐๐ผ๐ฝ ๐ฑ๐ถ๐ฟ๐.
๐๐๐ ๐ถ๐ ๐๐ผ๐ป'๐ ๐๐๐ผ๐ฝ ๐ฎ๐น๐น ๐๐ต๐ฒ ๐ผ๐ถ๐น ๐๐ต๐ฎ๐ ๐ฐ๐ฎ๐ป ๐ฑ๐ฒ๐๐๐ฟ๐ผ๐ ๐๐ผ๐๐ฟ ๐จ๐ ๐ผ๐ฟ ๐ฅ๐ข ๐บ๐ฒ๐บ๐ฏ๐ฟ๐ฎ๐ป๐ฒ๐.
As water scarcity becomes a growing global challenge, more companies are forced to use lower-quality water sources for industrial processes and water reuse applications.
The reality is that many of these water sources contain traces of hydrocarbons from industrial activities, stormwater runoff, shipping, refineries, production facilities, or aging infrastructure.
The contamination is often invisible.
And that's exactly what makes it dangerous.
Many engineers assume that installing a 5-micron cartridge filter upstream of their UF or RO system provides sufficient protection. Unfortunately, oil contamination doesn't behave like solid particles.
Small oil droplets and emulsified hydrocarbons can easily pass through conventional particle filters and eventually reach the membrane surface.
The result:
- Membrane fouling
- Increased differential pressure
- More frequent CIP cleaning
- Reduced membrane life
- Higher operating costs
- Unplanned downtime
Once oil attaches itself to a membrane surface, restoring the original performance can be difficult and expensive.
A smarter approach is to remove the oil before it ever reaches the membranes.
This is where Oillockยฎ oil absorption elements come in.
Water flows through the element at a very high flux rate while hydrocarbons are selectively absorbed by a specialized polymer media. The oil reacts with the polymer and forms a solid gel inside the filter structure.
As more oil is captured, the differential pressure gradually increases until the element reaches its capacity and physically blocks the flow.
The key advantage?
๐ง๐ต๐ฒ๐ฟ๐ฒ ๐ถ๐ ๐ป๐ผ ๐ผ๐ถ๐น ๐ฏ๐ฟ๐ฒ๐ฎ๐ธ๐๐ต๐ฟ๐ผ๐๐ด๐ต.
Unlike many separation technologies, a saturated Oillockยฎ element does not allow captured hydrocarbons to pass downstream. The flow simply stops, protecting the UF or RO membranes from contamination.
A relatively simple filtration step can prevent expensive membrane replacements, reduce chemical consumption, minimize downtime and extend the life of the entire water treatment system.
The question is not whether your feed water contains solids.
The question is:
๐๐ผ๐ ๐บ๐๐ฐ๐ต ๐ผ๐ถ๐น ๐ถ๐ ๐ฟ๐ฒ๐ฎ๐ฐ๐ต๐ถ๐ป๐ด ๐๐ผ๐๐ฟ ๐บ๐ฒ๐บ๐ฏ๐ฟ๐ฎ๐ป๐ฒ๐ ๐๐ถ๐๐ต๐ผ๐๐ ๐๐ผ๐ ๐ธ๐ป๐ผ๐๐ถ๐ป๐ด ๐ถ๐?
Have you encountered oil fouling challenges in UF or RO systems? We'd be interested to hear how you solved them.
