Control Devices New Zealand

Control Devices New Zealand Our solution will be fit for purpose and designed as swap out/swap in.
(1)

Control Devices can provide solutions to meet existing man-machine interface requirements by replacing an existing controller that is obsolete, or a new concept from Design to Finish.

UNIVERSAL SIGNAL BEACONS are multifunctional signal beacons designed for applications where visual and audible signallin...
01/09/2026

UNIVERSAL SIGNAL BEACONS are multifunctional signal beacons designed for applications where visual and audible signalling can be integrated into industrial machinery and automation environments.

🔴 Key Features
• Lens Diameter: 70 mm
• LED Module: SMD
• Light Colours: Red, Green, Yellow, Blue, White
• Sound: 2 melodies
• Mounting: Surface & Wall
• Certifications: CE, EAC, RoHS, E37*

A practical option to consider for Factory Automation, Machine Control, Industrial Machinery, Material Handling and equipment status indication applications.

Looking for an Industrial Signal Beacon for your machine or automation system? The TER Universal Signal Beacons may be worth considering depending on your application requirements.

*E37 is not available on all versions.

📩 Contact Control Devices NewZealand for technical support and product selection assistance.
📞 0800 443 346
Inbox : Control Devices NewZealand
Website : www.controldevices.co.nz�

P133 MID STROKE LINEAR POSITION SENSORPosition feedback for machinery where compact installation and controlled linear m...
25/08/2026

P133 MID STROKE LINEAR POSITION SENSOR

Position feedback for machinery where compact installation and controlled linear measurement matter.

The POSITEK P133 uses non-contacting inductive technology to measure linear movement, with the sensor travel calibrated to the customer’s required specification.

Its compact stainless-steel construction and configurable mechanical and electrical options make it suitable for consideration in a range of industrial and OEM machinery applications.

Potential applications include:
• Agricultural Machinery
• Mobile Machinery
• Hydraulic & Mechanical Equipment
• OEM Machinery
• Industrial Automation
• Test & Measurement Equipment

Key Features
• Non-contacting inductive technology to eliminate wear
• Travel set to customer’s requirement
• Short body length
• High durability and reliability
• High accuracy and stability
• Sealing to IP65/IP67 as required

For machinery designers looking for linear position feedback within a compact installation, the P133 provides a configurable approach to mid-stroke position measurement.

If your application requires a specific travel range or mounting arrangement, the P133 can be considered as part of the sensor selection process.
📩 Contact Control Devices NewZealand for technical support and product selection assistance.
📞 0800 443 346
Inbox : Control Devices NewZealand
Website : www.controldevices.co.nz�

P510 ROTARY SENSOR | High Shaft Loading Position FeedbackWhen a rotary mechanism requires accurate position feedback and...
21/08/2026

P510 ROTARY SENSOR | High Shaft Loading Position Feedback

When a rotary mechanism requires accurate position feedback and the sensor shaft may experience both axial and radial loading, the right sensor design matters.

The Positek P510 Rotary Sensor is an inductive position sensor developed for industrial and scientific feedback applications, particularly where a rugged rotary sensing solution is required.

🔹 Output calibrated to the required angle between 11° and 60°
🔹 Linear output proportional to input shaft rotation
🔹 Full 360° rotational freedom
🔹 Rugged stainless-steel body and shaft
🔹 IP67 sealing
🔹 Suitable for OEM and industrial machinery applications

The P510 can be considered for industrial machinery, OEM equipment, mechanical linkages and rotary position feedback applications where shaft loading is an important consideration.

Developing a machine or looking for rotary position feedback for a demanding mechanical application?
📩 Contact Control Devices NewZealand for technical support and product selection assistance.
📞 0800 443 346
Inbox : Control Devices NewZealand
Website : www.controldevices.co.nz�

PKI MODULAR CANBUS KEYPAD | HMI for Industrial Machinery & VehiclesAs machines become more multifunctional, operators ne...
19/08/2026

PKI MODULAR CANBUS KEYPAD | HMI for Industrial Machinery & Vehicles

As machines become more multifunctional, operators need a control interface that keeps essential functions clear, accessible and easy to identify.

PKI Modular CANbus Keypad is a configurable HMI designed with CANopen and J1939 communication, RGB LED rings and icon backlighting to provide clear visual feedback for machine functions.

Suitable for applications such as:
• Mining & Construction Equipment
• Excavators & Loaders
• Agricultural Machinery
• Material Handling Equipment
• Electric & Off-Highway Vehicles
• Industrial Machinery

Key Features
• RGB rings and icon backlighting
• Actuation life: 3 million operations
• Sealing: IP67 / IP69K
• UV Resistance: UVB 400 hrs
• Operating Temperature: -40°C to +70°C
• Storage Temperature: -40°C to +85°C
• Supply voltage: 12–24V DC nominal (8–32V DC range)
• CANopen / J1939 communication

A practical option for machine manufacturers, system integrators and engineers developing CANbus control panels and operator interfaces for demanding mobile equipment.

Working on a new machine control panel? Get in touch with us to discuss the PKI configuration for your application.

📩 Contact Control Devices NewZealand for technical support and product selection assistance.
📞 0800 443 346
Inbox : Control Devices NewZealand
Website : www.controldevices.co.nz

KP6 SERIES SWITCH PANELDesigned for compact operator control applications where multiple functions need to be integrated...
19/08/2026

KP6 SERIES SWITCH PANEL

Designed for compact operator control applications where multiple functions need to be integrated into a limited panel space.

6 customisable keys | LED indication | Backlit legends | 1M mechanical cycles | Snap-in mounting

A practical panel interface for mobile machinery, mining equipment, agricultural machinery and construction equipment.

What functions would you integrate into a 6-key operator panel?

📩 Contact Control Devices NewZealand for technical support and product selection assistance.
📞 0800 443 346
Inbox : Control Devices NewZealand
Website : www.controldevices.co.nz�

HC HAND CONTROLLER Designed for remote equipment, robotics and unmanned ground vehicle (UGV) applications, the HC Hand C...
18/08/2026

HC HAND CONTROLLER

Designed for remote equipment, robotics and unmanned ground vehicle (UGV) applications, the HC Hand Controller provides multiple interface options for integrating handheld control into industrial and field-based systems.

Plug-and-play installation options:
• USB
• Ethernet
• CANopen
• J1939
• Analogue

Key specifications:

• Operating temperature: -40°C to +85°C
• Storage temperature: -40°C to +85°C
• Panel sealing: IP67
• Humidity resistance: 93% humidity at +40°C for 16 hours
• Designed to meet MIL-STD-810G

Suitable for applications including:

UGV • Field Robotics • Remote Equipment • Industrial Machinery • Mobile Equipment • Robotics Control

Looking for a hand controller for a UGV, robotics platform or remote-controlled industrial system?

HC Hand Controller is worth considering for your next control system.

📩 Contact Control Devices NewZealand for technical support and product selection assistance.
📞 0800 443 346
Inbox : Control Devices NewZealand
Website : www.controldevices.co.nz�

LTR10 MULTIFUNCTIONAL TIME RELAYMulti-Function Time Control for Industrial AutomationThe LUMEL LTR10 Multifunctional Tim...
18/08/2026

LTR10 MULTIFUNCTIONAL TIME RELAY

Multi-Function Time Control for Industrial Automation

The LUMEL LTR10 Multifunctional Time Relay is designed for control applications requiring multiple timing functions within electrical and automation systems.

Key Features

• 10 time functions
• 10 time ranges
• 12…240 V AC/DC supply
• 2 changeover contacts
• 17.5 mm modular housing
• Direct DIN-rail mounting

Suitable for applications involving Control Panels, Machine Control, Industrial Automation and electrical control systems.

Working on a control panel or automation application that requires multiple timing functions?

G150Z GYROSCOPE The Gladiator Technologies G150Z is a compact single-axis analog MEMS gyroscope designed for application...
17/08/2026

G150Z GYROSCOPE

The Gladiator Technologies G150Z is a compact single-axis analog MEMS gyroscope designed for applications requiring accurate angular-rate measurement and motion control.

Key Specifications
• 1.2°/h Short Term Bias Stability
• 0.001°/s/√Hz ARW
• ±100°/s, ±175°/s and ±300°/s rate ranges
• 200 Hz bandwidth
• 28 g mass
• 500 g shock rating
• Low-noise MEMS sensing
• Analog output

Typical applications include stabilization, flight control, high-speed train monitoring, and automotive testing, making the G150Z relevant to a wide range of motion-sensing and control applications.

What type of platform are you working with—UAV, flight control, rail/high-speed train or automotive testing?

JC8000 MULTI-AXIS INDUSTRIAL JOYSTICKDesigned for demanding operator-control applications in off-highway vehicles, the J...
14/08/2026

JC8000 MULTI-AXIS INDUSTRIAL JOYSTICK
Designed for demanding operator-control applications in off-highway vehicles, the JC8000 combines a highly robust mechanical design with non-contact Hall-effect sensing for long operational life.

Key features include:
• Rated for 5-million cycles
• Hall-effect sensor technology
• Centre detent for enhanced return-to-centre performance
• Dual outputs with sense options
• Electronics sealed to IP69K
• 78 mm minimum under-panel depth
• Multiple grip options

The JC8000 is particularly suited to physically demanding machinery applications, including skid-steer loader controls and other off-highway equipment.

What type of machinery would you specify a multi-axis joystick for?

📩 Contact Control Devices NewZealand for technical support and product selection assistance.
📞 0800 443 346
Inbox : Control Devices NewZealand
Website : www.controldevices.co.nz�

HERGA 6240 Footswitch Bellows is a compact footswitch range featuring a tough flexible PVC cover and IPX7 protection.Key...
13/08/2026

HERGA 6240 Footswitch Bellows is a compact footswitch range featuring a tough flexible PVC cover and IPX7 protection.

Key features include:
• Ideal for hand or foot operation
• Tough flexible PVC cover
• Choice of colours
• Change-over contact variants
• Aluminium or plastic base plate options
• Anti-slip rubber or foam pad options

Designed with flexibility in mind, the 6240 can be considered for a wide range of equipment and custom applications where compact foot control is required.

📩 Contact Control Devices NewZealand for technical support and product selection assistance.
📞 0800 443 346
Inbox : Control Devices NewZealand
Website : www.controldevices.co.nz�

#6240

Address

5E, 14 Waikumete Road
Glen Eden
0602

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 5pm

Telephone

+6498130871

Website

Alerts

Be the first to know and let us send you an email when Control Devices New Zealand posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share