Motor Bearing Specialists - MBS

Call Directions Website

Motor Bearing Specialists - MBS We're predictive maintenance experts, specialising in: Vibration Analysis, Laser Alignment, Thermal Imaging and Dynamic Balancing.

Down in the pump chamber, getting eyes on what matters.Wherever the plant takes us - confined spaces, remote sites, awkw...
20/10/2026

Down in the pump chamber, getting eyes on what matters.

Wherever the plant takes us - confined spaces, remote sites, awkward access - we get in and get the data. That's how you stay ahead of failures before they shut down production.

📞 Need us on site? Get in touch.

A good condition monitoring report doesn't just tell you what we found. It tells you what it means and what to do about ...
13/10/2026

A good condition monitoring report doesn't just tell you what we found. It tells you what it means and what to do about it.

Clear fault descriptions, severity ratings, recommended actions, and a timeline for follow-up - so the maintenance manager can take it straight to the team and make a decision without having to decode anything.

That's what 30 years of reporting looks like. No jargon, no fluff - just the information you need to act.

📞 Want to see what our reports look like? Get in touch.

Already have your Cat I? The next step is Vibration Analysis Category II — coming to Hamilton in November.This is where ...
08/10/2026

Already have your Cat I? The next step is Vibration Analysis Category II — coming to Hamilton in November.

This is where you move from collecting data to diagnosing faults. Five days covering advanced fault analysis, signal processing, spectrum and phase analysis, shaft alignment, balancing, and more — finishing with the MIBoC VCAT II certification exam.

📅 9–13 November 2026
📍 Hamilton, NZ
🎓 MIBoC VCAT II certification exam included

📩 Get in touch to register

Not a bad office view. 🌄The job takes us all over New Zealand — Bluff to Cape Reinga, wherever the plant needs us. Not e...
06/10/2026

Not a bad office view. 🌄

The job takes us all over New Zealand — Bluff to Cape Reinga, wherever the plant needs us. Not every day looks like this, but we're not complaining when it does.

📞 Need us on site? Get in touch - we travel.

Vibration Analysis Category I is coming to Christchurch this October.If you're responsible for collecting vibration data...
30/09/2026

Vibration Analysis Category I is coming to Christchurch this October.

If you're responsible for collecting vibration data and want to formalise your skills with internationally recognised certification, this is the course for you. Four days covering the fundamentals — vibration measurement, spectrum analysis, common fault conditions, and alarm limits — finishing with the MIBoC VCAT I certification exam.

📅 27–30 October 2026
📍 Christchurch, NZ
🎓 MIBoC VCAT I certification exam included

📩 Get in touch to register

Rotating machinery takes a beating. When it's out of balance, everything downstream pays for it - bearings, seals, struc...
29/09/2026

Rotating machinery takes a beating. When it's out of balance, everything downstream pays for it - bearings, seals, structure, and ultimately your production schedule.

MBS has the expertise to get it running true and keep it that way.
📞 Get in touch.

Scheduled monitoring visits give you a snapshot. Online condition monitoring gives you the full picture - continuously.S...
22/09/2026

Scheduled monitoring visits give you a snapshot. Online condition monitoring gives you the full picture - continuously.

Sensors fitted to critical assets feed data around the clock, flagging changes in vibration, temperature, and other key indicators the moment they start trending the wrong way. No waiting for the next scheduled visit to find out something's gone sideways.

📩 Want to know if online monitoring makes sense for your operation? Get in touch.

Fan balancing on-site using the MBS Microlog analyser.Out-of-balance fans put unnecessary stress on bearings and surroun...
15/09/2026

Fan balancing on-site using the MBS Microlog analyser.

Out-of-balance fans put unnecessary stress on bearings and surrounding structure - the vibration builds over time and the wear adds up. On-site dynamic balancing corrects it without the need to remove the fan from service.

Quick to do. Makes an immediate difference.
📞 Got a fan or rotating asset that's running rough? Get in touch.

If your team is responsible for lubrication on critical plant — yes, it probably is.The Noria ML-1 course is designed fo...
09/09/2026

If your team is responsible for lubrication on critical plant — yes, it probably is.

The Noria ML-1 course is designed for lubrication techs, fitters, maintainers, reliability staff, and condition monitoring technicians. The people doing the work every day.

📅 29 Sept – 2 October · Hamilton, NZ
Group pricing available. Your employer may fund it.

Most equipment failures trace back to poor lubrication practices. Wrong product, wrong amount, wrong interval — it adds ...
02/09/2026

Most equipment failures trace back to poor lubrication practices. Wrong product, wrong amount, wrong interval — it adds up fast.

The Noria Machinery Lubrication I (ML-1) course is coming to Hamilton this September. Practical training covering lubricant selection, application, contamination control, oil sampling and more — the skills that directly reduce failures on your plant floor.

📅 29 Sept – 2 October · Hamilton, NZ

Address

Timaru

Opening Hours

Monday 8am - 4:30am
Tuesday 8am - 4:30am
Wednesday 8am - 4:30am
Thursday 8am - 4:30am
Friday 8am - 4:30am

Telephone

+6436887542

Website

Alerts

Be the first to know and let us send you an email when Motor Bearing Specialists - MBS posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category