Aspiring Engineering & Jet Care

Aspiring Engineering & Jet Care Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Aspiring Engineering & Jet Care, Engineering service, 3 Frederick Street Wanaka, Wanaka.

Aspiring Engineering is a aluminum, steel and stainless steel fabrication workshop based in Wanaka
Jet Care focuses on jet boat unit servicing brands such as Hamilton jets, Scott waterjets, Southern jets and more.

Something a little different come through the door this week. 100mm jet unit needing an impeller replacement.
18/07/2026

Something a little different come through the door this week. 100mm jet unit needing an impeller replacement.

Custom outdoor bbq frame with incorporated draws. This was installed with a granite benchtop and a cedar frame underneat...
11/07/2026

Custom outdoor bbq frame with incorporated draws. This was installed with a granite benchtop and a cedar frame underneath. The steel was finished with a wax coating to prevent rust and keep the epic raw steel look.

Big N70 Hilux in for a new bull bar. With the truck running a body lift, we had to do some custom work on the mounts to ...
04/07/2026

Big N70 Hilux in for a new bull bar. With the truck running a body lift, we had to do some custom work on the mounts to get it sitting right.

Custom 3" stainless exhaust fabricated in house. Tucked up higher than the chassis rails. This Laurel is going to rip.
15/06/2026

Custom 3" stainless exhaust fabricated in house. Tucked up higher than the chassis rails. This Laurel is going to rip.

From design to completion, this was one epic project. Alloy trailer built to house a roofing iron roll former, steel fra...
14/06/2026

From design to completion, this was one epic project. Alloy trailer built to house a roofing iron roll former, steel frame to hold two coils above, drum roller to feed the machine and clip together roller conveyors to go out the back.

This Scott 852 got the treatment. New wear rings, cutlass bearings, reshaped tailpipe vanes, rebuilt trim nozzle and bla...
14/06/2026

This Scott 852 got the treatment. New wear rings, cutlass bearings, reshaped tailpipe vanes, rebuilt trim nozzle and blades.

Large biz450 pipe we fabricated for a local gold miners dredge.
14/06/2026

Large biz450 pipe we fabricated for a local gold miners dredge.

This 212 is ready to rip after an impeller rebuild, new wear ring and cutlass bearing.
14/06/2026

This 212 is ready to rip after an impeller rebuild, new wear ring and cutlass bearing.

A pair of grandstands we completed in house for the Wanaka A&P show.
14/06/2026

A pair of grandstands we completed in house for the Wanaka A&P show.

When the customer's criteria is "Make something nice" you know it's going to be a fun project.
14/06/2026

When the customer's criteria is "Make something nice" you know it's going to be a fun project.

Address

3 Frederick Street Wanaka
Wanaka
9305

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 3:30pm

Website

Alerts

Be the first to know and let us send you an email when Aspiring Engineering & Jet Care posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category