https://www.facebook.com/286727638701879/

VNC Ventures, Antipolo (2026)

06/06/2021

5500W SOLAR INVERTER HYBRID MPPT OFF-GRID 48V MPPT 500V DC INPUT 100A SOLAR CHARGING WITH WIFI

Product details of 5.5KW NEW OFF-GRID SOLAR INVERTER 6000 WATTS PV ARRAY PURE SINE WAVE 100A MPPT SOLAR CHARGE CONTROLLER 48V 220V 50/60Hz WITH WIFI WORKS WITHOUT BATTERY 6000 dc
·
Pure sine wave inverter
·
Solar charger of the maximum charging current is 100A
·
120-500V wide PV input
·
Lithium battery
·
Can work without battery
·
Generate power from PV directly to supply load, even without battery
·
PV to AC efficiency is much higher
·
wifi mode,can connect with your phone
This is multi-function inverter/charger ,combining functions ofinverter,MPPT solar charger and battery charger to offer uninterruptible powersupport with portable size .Its comprehensive LCD display offersuser-configurable and easy-accessible button operation such as battery charging current .AC/Solar charger priority ,and acceptable input voltage based on different applications

06/06/2021

1000W Solar Inverter SUN-GENERATION 2 GRID TIED INVERTER 45-90V MPPT with EXTERNAL Limiter Sensor, WIFI Monitoring 45-90V and Cable/US Plug

*1000 KW Grid Tie Inverter DC Input 45-90Voc *Start-up Voltage 49V & Voc must not exceed 90V * Grid Tie Inverter with Limiter Sensor.
Delivers only the power needed by the load * Battery discharge power mode,* Can auto regulate depth of discharge of the battery banK
Micro Inverter Max Power Point Tracking and AC Stackable, Anti-island protection

06/06/2021

1500W DEYE SOLAR GRID TIED INVERTER MPPT HIGH 500V DC INPUT FREE WIFI PLUG AND EXTERNAL LIMITER SENSOR

DEYE GRID TIED INVERTER 1500/2000/3000Kw MPPT SUN GENERATION 2 SERIES 500V HIGH INPUT DC VOLTAGE WITH INTEGRATED LIMITER SENSOR PLUS WIFI
*Single Phase String Power Inverter can convert solar panel DC power into AC power which can directly input to the grid. Its appearance is shown below.These models contain SUN-G Series Technology Platfom( 1.5k-G to 3.0K-G and 3.6K-G、SUN-5K-G、SUN-6K-G、SUN-7.5K-G and SUN-8K-G
* The single phase string power inverter is designed and tested under related safety regulations. It can ensure the personal safety of the user. But as a electric device,it may cause shock or injury by incorrect operation. Inverter should be installed and maintained by qualified person under local standard regulations. Unlike the other earlier Sun Series models, this DEYE Grid-Tied is a high voltage model going up to 500V
*The inverter panel has 4 indicators, the left one is DC output indicator(green), indicates normal DC input power status. Beside is the AC indicator (green),indicates normal AC connecting status. Next is the operating in dicator(green) indicates normal output. The right indicator is alarm(red), indicates alarming.

* The Single-phase string inverters use a dot matrix display,mainly contains the following: 1) Inverter operation status and information; 2) Operating information; 3) Warning message and malfunction display.
*When you receive the inverter and prepare to install it, one should select a suitable location, should consider below factors: 1) proper ventilation and 1) Must insure the air ventilation of the installation location,improper installation may cause overheating and effect the working efficiency and lifespan.

2) Sun-shade—Expose the inverter to sunshine will cause overheating and effect the working efficiency.

3) Avoid rain and snow—Even if the inverter has IP65 protection. We still recommend

installing the inverter at the ventilate place where can avoid rain and snow. It can help

extend the lifespan of the inverter.

*Inverter has the function of wireless remote monitoring. The inverter with Wifi function is equipped with Wifi Plug to connect the inverter and network. Wifi Plug's operation, installation, Internet access, APP downloading and other processes are detailed in the

instructions.
*Before starting the inverter, make sure that the inverter can meet the following conditions, otherwise it may result in fire or damage to the inverter. In this case, we do not undertake any responsibility. At the same time, to optimize the system configuration, it is recommended that the two inputs be connected to the same number of photovoltaic modules.

a) The maximum open voltage of each set of photovoltaic modules shall not exceed 600VDC under any conditions.
b). Each input of the inverter must use the same type of photovoltaic module in series.

c). Total output power of pv shall not exceed the maximum input power of inverter, each photovoltaic modules shall not exceed the rated power of each channel.

d). The short circuit current of each series of photovoltaic modules cannot be greater

than 10A at any time.
*The inverter has integrated export limitation function. The function is to adjust the output of inverter quickly according to the power of the user and solar panels, prevent the output of the inverter from being fed to the power grid. This limiter function is optional. If you buy the inverter with limiter, a current sensor will be included in the package which is
necessary for limiter function. This inverter has integrated export limitation function. The function is to adjust the output of inverter quickly according to the power of the user and solar panels, prevent the output of the inverter from being fed to the power grid. This limiter function is optional. If you buy the inverter with limiter, a current sensor will be included in the package which is necessary for limiter function.
*String type inverter doesn't need regular maintenance. However, debris or dust will affect heat sink's thermal performance. It is better to clean it with a soft brush. If the surface is too dirty and affect the reading of LCD and LED lamp, you can use wet cloth to clean it up.

06/06/2021

SUN SERIES 2000W Solar GRID TIED INVERTER GENERATION 2 45-90V MPPT plus External Limiter Sensor and WIFI·
MAIN FEATURE OF 2000w SUNG-G2 GRID TIE INVERTER WITH LIMITER, EXTERNAL LIMITER SENSOR AND WIFI 45-90 Voc

* Manage and control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels;* if not eliminated and excess power is extended to the grid without net metering agreement, ,the producer pays for the excess power it given to the distribution grid as electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow

* In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem* With SUN-G2 , limit function is inside the GTI-We call this internal limiter and no additional limiter module is needed and thus, it reduced customer’s inverter cost and it makes ,more easier for installation. .

06/06/2021

2000w DEYE GRID TIE00W DEYE SOLAR GRID TIED INVERTER MPPT HIGH 500V DC FREE WIFI PLUG AND External Limiter Sensor
DEYE GRID TIED INVERTER1500/2000/3000Kw MPPT SUN GENERATION 2 SERIES 500V HIGH INPUT DC VOLTAGE WITHINTEGRATED LIMITER SENSOR PLUS WIFI
*SinglePhase String Power Inverter can convert solar panel DC power into AC power which can directly input to the grid. Its appearance is shown below.Thesemodels contain SUN-G Series Technology Platfom( 1.5k-G to 3.0K-G and 3.6K-G
、
SUN-5K-G
、
SUN-6K-G
、
SUN-7.5K-G and SUN-8K-G.
*The single phase string power inverter is designed and tested under related safety regulations. It can ensure the personal safety of the user. But as an electric device,it may cause shock or injury by incorrect operation. Inverter should be installed and maintained by qualified person under local standard regulations. Unlike the other earlier Sun Series models, this DEYE Grid-Tied isa high voltage model going up to 500V
*The inverter panel has 4 indicators, the left one is DC output indicator(green),indicates normal DC input power status. Beside is the AC indicator(green),indicates normal AC connecting status. Next is the operating indicator(green) indicates normal output. The right indicator is alarm(red),indicates alarming. * The Single-phase string inverters use a dot matrix display,mainly contains the following: 1) Inverter operation status and information; 2) Operating information; 3) Warning message and malfunction display.
*When you receive the inverter and prepare to install it, one should select a suitable location, should consider below factors: 1) proper ventilation and 1)Must insure the air ventilation of the installation location,improperi nstallation may cause overheating and effect the working efficiency an dlifespan. 2) Sun-shade—Expose the inverter to sunshine will cause overheating and effect the working efficiency. 3) Avoid rain and snow—Even if the inverter has IP65 protection. We still recommend installing the inverter at thev entilated place where can avoid rain and snow. It can help extend the lifespanof the inverter. *Inverter has the function of wireless remote monitoring. The inverter with Wifi function is equipped with Wifi Plug to connect the inverter and network. Wifi Plug's operation, installation, Internet access, APP downloading and other processes are detailed in the instructions.
*Beforestarting the inverter, make sure that the inverter can meet the followingconditions, otherwise it may result in fire or damage to the inverter. In thiscase, we do not undertake any responsibility. At the same time, to optimize thesystem configuration, it is recommended that the two inputs be connected to thesame number of photovoltaic modules. a) The maximum open voltage of each set ofphotovoltaic modules shall not exceed 600VDC under any conditions.
b).Each input of the inverter must use the same type of photovoltaic module inseries. c). Total output power of pv shall not exceed the maximum input power of inverter, each photovoltaic modules shall not exceed the rated power of each channel. d). The short circuit current of each series of photovoltaic modules cannot be greater than 10A at any time.
*The inverter has integrated export limitation function. The function is to adjust the output of inverter quickly according to the power of the user and solar panels, prevent the output of the inverter from being fed to the power grid.This limiter function is optional. If you buy the inverter with limiter, a current sensor will be included in the package which is necessary for limiter function. This inverter has integrated export limitation function. The functionis to adjust the output of inverter quickly according to the power of the userand solar panels, prevent the output of the inverter from being fed to the power grid. This limiter function is optional. If you buy the inverter with limiter, a current sensor will be included in the package which is necessaryf or limiter function.
*Stringtype inverter doesn't need regular maintenance. However, debris or dust will affect heat sink's thermal performance. It is better to clean it with a soft brush. If the surface is too dirty and affect the reading of LCD and LED lamp,you can use wet cloth to clean it up.

06/06/2021

DEYE GRID TIED INVERTER1500/2000/3000Kw MPPT SUN GENERATION 2 SERIES 500V HIGH INPUT DC VOLTAGE WITHINTEGRATED LIMITER SENSOR PLUS WIFI
*SinglePhase String Power Inverter can convert solar panel DC power into AC power which can directly input to the grid. Its appearance is shown below.Thesemodels contain SUN-G Series Technology Platfom( 1.5k-G to 3.0K-G and 3.6K-G
、
SUN-5K-G
、
SUN-6K-G
、
SUN-7.5K-G andSUN-8K-G
*The single phase string power inverter is designed and tested under related safety regulations. It can ensure the personal safety of the user. But as an electric device,it may cause shock or injury by incorrect operation. Inverter should be installed and maintained by qualified person under local standard regulations. Unlike the other earlier Sun Series models, this DEYE Grid-Tied isa high voltage model going up to 500V
*Thei nverter panel has 4 indicators, the left one is DC output indicator(green),indicates normal DC input power status. Beside is the AC indicator(green),indicates normal AC connecting status. Next is the operating indicator(green) indicates normal output. The right indicator is alarm(red),indicates alarming. * The Single-phase string inverters use a dot matrix display,mainly contains the following: 1) Inverter operation status and information; 2) Operating information; 3) Warning message and malfunction display.
*When you receive the inverter and prepare to install it, one should select a suitable location, should consider below factors: 1) proper ventilation and 1)Must insure the air ventilation of the installation location,improper installation may cause overheating and effect the working efficiency and lifespan. 2) Sun-shade—Expose the inverter to sunshine will cause overheating and effect the working efficiency. 3) Avoid rain and snow—Even if the inverter has IP65 protection. We still recommend installing the inverter at the ventilate place where can avoid rain and snow. It can help extend the life span of the inverter. *Inverter has the function of wireless remote monitoring. The inverter with Wifi function is equipped with Wifi Plug to connect the inverter and network. Wifi Plug's operation, installation, Internet access, APP downloading and other processes are detailed in the instructions.
*Before starting the inverter, make sure that the inverter can meet the following conditions, otherwise it may result in fire or damage to the inverter. In this case, we do not undertake any responsibility. At the same time, to optimize the system configuration, it is recommended that the two inputs be connected to the same number of photovoltaic modules. a) The maximum open voltage of each set of photovoltaic modules shall not exceed 600VDC under any conditions.
b).Each input of the inverter must use the same type of photovoltaic module inseries. c). Total output power of pv shall not exceed the maximum input powerof inverter, each photovoltaic modules shall not exceed the rated power of eachchannel. d). The short circuit current of each series of photovoltaic modulescannot be greater than 10A at any time.

The inverter has integrated export limitation function. The function is to adjust the output of inverter quickly according to the power of the user and solar panels, prevent the output of the inverter from being fed to the power grid.This limiter function is optional. If you buy the inverter with limiter, a current sensor will be included in the package which is necessary for limiter function. This inverter has integrated export limitation function. The functioni s to adjust the output of inverter quickly according to the power of the user and solar panels, prevent the output of the inverter from being fed to the power grid. This limiter function is optional. If you buy the inverter with limiter, a current sensor will be included in the package which is necessary for limiter function.l *Stringtype inverter doesn't need regular maintenance. However, debris or dust will affect heat sink's thermal performance. It is better to clean it with a softbrush. If the surface is too dirty and affect the reading of LCD and LED lamp,you can use wet cloth to clean it up.

06/06/2021

NEXT SOLAR HYBRID 3200VA/3200W SOLAR INVERTER, OFF GRID, 24V, PURE SINE WAVE, 500 HIGH VOLTAGE DC INPUT 220/230V AC MPPT 80A AC/SOLAR CHARGING INCLUDES WIFI PLUG

This is a multi-function inverter/charger, combining functions of inverter, solar charger and battery charger tooffer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurableand easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications. Smart battery charger design for optimized battery performance Configurable input voltage range for home appliances and personal computers via LCD setting. Compatible with Lithium Battery, can do configurable high and low voltage charging cut-off including battery equalization function. It has a wide range of DC voltage input range of 120V-450V making parallel and series connection of solar panels very flexible. MPPT with High voltage at 500V and charging current up to 80A. Configurable battery charging current based on applications via LCD setting. Compatible to mains voltage or generator power. Auto restart while AC is recovering. This can do Cold start function and can operate batteryless. With WIFI monitoring module/plug included in this package.

06/06/2021

3200W SOLAR INVERTER OFF GRID 24V MPPT 80A PURE SINE WAVE WITH WIFI INCLUDED

This is a NEXT NM 3200-24 solar inverter 3200W 24v, off grid pure sine wave, MPPT 80A smart solar charger with battery optimization capability, compatible with Lithium and other battery types and output power factor produced by top manufacturer NEXT Solar.

06/06/2021

5500W/5500VA Solar Hybrid Inverter 220V 50/60 Hz 48Vdv Built-in 100A MPPT Solar Charge Controller Off Grid Solar Inverter 120-500 Input DC & Screen Display Removable.

This is a multi-function inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD displayoffers user-configurable and easy-accessible button operation such as batterycharging current, AC/solar charger priority, and acceptable input voltage based on different applications. This inverter has smart battery management and equalization features prolonging the useful life of batteries.

VNC Ventures

06/06/2021

06/06/2021

06/06/2021

06/06/2021

06/06/2021

06/06/2021

06/06/2021

06/06/2021

06/06/2021

Address

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category