Tutor Jack Ph

19/08/2026

Quick review! An elevator lifts a 500 kg load vertically through 6 m in 20 seconds. Ignoring losses, what minimum power is required?

Can you solve it before checking the solution?

Comment your answer below and follow Tutor Jack Ph for more engineering review content, practical STEM quizzes, and real-world problem-solving posts.

19/08/2026

Civil Engineering Licensure Exam Series
Past Exam Problem #010

In wave analysis, the “highest wave” refers to the single maximum wave height observed in a wave train together with the period of that same wave. In short, it is the tallest individual wave and its associated wave period.

This is different from the “significant wave,” which represents the average height of the highest one-third of waves. That means the significant wave describes overall sea-state conditions, while the highest wave focuses on the single largest wave in the record.

Understanding this distinction is important in coastal engineering, harbor design, breakwater analysis, and marine structure planning, where wave characteristics directly affect safety and design loads.

Keep reviewing and sharpening your engineering concepts.

Follow Tutor Jack Ph for more Civil Engineering Licensure Exam solutions, engineering tutorials, and board exam review content.

19/08/2026

Quick review! 💧

Given:
ρ = 1000 kg/m³
g = 9.81 m/s²
h = 5 m

Use:
p = ρgh

Substitute:
p = (1000)(9.81)(5)
p = 49,050 Pa
p = 49.1 kPa

Hydrostatic pressure is one of the most important concepts in fluid mechanics. It explains how pressure in a fluid increases with depth due to the weight of the fluid above. This principle is widely used in water supply systems, storage tanks, dams, pipelines, and hydraulic engineering. Understanding hydrostatic pressure helps engineers estimate water pressure at outlets, design safe systems, and analyze how fluids behave in real-world structures.

Follow Tutor Jack Ph for more quick engineering solutions, practical STEM review content, and easy-to-understand real-life engineering applications.

19/08/2026

Civil Engineering Licensure Exam Series
Past Exam Problem #010

Can you identify the correct wave term from this past exam problem? 🌊📘

This item tests your understanding of basic coastal and ocean engineering terminology. Read the definition carefully and see if you can spot the correct answer before checking the solution.

Drop your answer in the comments below and challenge your fellow future engineers too.

Follow Tutor Jack Ph for more Civil Engineering Licensure Exam problems, engineering review content, and board exam practice.

19/08/2026

Learn how to solve a basic pacing problem in surveying using the pace factor method.

In this example, a student walks a known 50-meter calibration line three times and records 64, 66, and 65 paces. Using the average number of paces, we determine the pace factor in meters per pace and use it to estimate an unknown distance measured at 156 paces.

This quick tutorial is ideal for civil engineering, surveying, geodetic engineering, and engineering students reviewing fundamental methods of distance measurement.

Topics covered:
• Pacing in surveying
• Pace calibration
• Average number of paces
• Pace factor
• Estimating horizontal distance
• Basic surveying computations

Perfect for students taking Fundamentals of Surveying, Elementary Surveying, or Civil Engineering Surveying.

Learn how to solve a basic pacing problem in surveying using the pa...

18/08/2026

Welcome future engineers, engineers, and fellow STEM learners. Glad to have you here. Let's keep learning, solving and growing together! 🤙💪

Rabbur Sayyaf, Daniel Dwaine Gueco Gadores, Adc Brig Jen, Jek Tolentino, Ariane Dlc, Jun Policarpio, Aeron Kim Calangi, Robert Taga-an Jr., Okkaim Iren, Robert Patulay, Tony Okechukwu Nwawuru, Lawrence Macamay Cabili, Mohamed Sadhyf, Raed Nazzal, Pancho Mascarina, Lyju Pv, Najdet Almutar, Aneesh Karivellur, Mohamad Sugiyanto, Ronnie Mangon Geronimo, Sudheer Reddy, Shamsul Iqbal, Tyagaraju Kc, Mark Afari, Zakariyau Afeez, Mario Garib, Jon Meo Ibañez Jr., Josh Bordz, Ladda Dawson, Mhia Hedo, Phemelo Unene Smith, Hoàng Đức, Engr Adnan Ahmad, Mohamad Bakri, Abdelrahman Hamid Saad, Rahuman Khan, Jayson Felizarte Dalabajan, Himanshu Sharma, Engr Bello Dolapo, Nestor Hernandez Fuentes, Eric Panful, Hamid Khan, Jerick Sernal Agnes, Eng-moh Al Shafie, Yahaya Dahiru Danja, Kutty Raja, மக்கள் தேசம், Thamil Arasan, David Ramirez L, Ghazwan N S Jreou

18/08/2026

Civil Engineering Licensure Exam Series
Actual Exam Problem #009

The general term is traffic signs.

Traffic signs are devices placed on fixed or portable supports to communicate information through words, symbols, or both. Their purpose is to regulate traffic, warn road users of hazards or conditions, and guide drivers and pedestrians safely along the roadway.

Roadwork signs, overhead signs, and special instruction signs are more specific classifications, while “traffic signs” is the broader term that covers the definition given in the problem.

This topic is important in transportation and highway engineering because proper traffic signs support road safety, traffic regulation, driver guidance, and efficient movement of vehicles and pedestrians.

Follow Tutor Jack Ph for more Civil Engineering Licensure Exam solutions, transportation engineering tutorials, and board exam review content.

18/08/2026

Quick review! A faucet is located 5 m below the water level of an elevated storage tank. Ignoring pipe losses, what is the water pressure at the faucet?

Think you can solve it before checking the solution?

Comment your answer below and follow Tutor Jack Ph for more engineering review content, practical STEM quizzes, and real-world problem-solving posts.

18/08/2026

Quick review! ☀️🔋

Given:
P = 400 W = 0.4 kW
t = 5 h

Use:
E = Pt

Substitute:
E = (0.4)(5)
E = 2.0 kWh

Solar energy problems like this are important in electrical engineering, renewable energy systems, and sustainability studies. They help explain how power and time are used to estimate energy output. This concept is very useful in sizing solar systems, estimating daily energy production, and understanding how solar panels can support homes, schools, and other real-world applications.

Follow Tutor Jack Ph for more quick engineering solutions, practical STEM review content, and easy-to-understand real-life engineering applications.

18/08/2026

Civil Engineering Licensure Exam Series
Actual Exam Problem #009

Can you identify the correct traffic engineering term? 🚦🛣️

A device may be permanently mounted or temporarily supported, and its purpose is to regulate, warn, or guide road users through words or symbols.

This kind of definition-based question may look simple, but licensure exams often test whether you can distinguish general traffic-control terms from specific sign classifications.

Comment your answer below before checking the explanation.

Follow Tutor Jack Ph for more Civil Engineering Licensure Exam problems, transportation engineering review, and board exam practice.