https://www.facebook.com/111001618547269/

DZT Engineering

Home
Philippines
Calbayog
DZT Engineering

Civil Engineer
NwSSU
Civil/Structural Engineering Instructor and Practitioner
Est. Jan 2023

25/02/2026

𝐃𝐄𝐒𝐈𝐆𝐍 𝐁𝐀𝐒𝐄 𝐒𝐇𝐄𝐀𝐑 𝐒𝐀𝐌𝐏𝐋𝐄 𝐂𝐎𝐌𝐏𝐔𝐓𝐀𝐓𝐈𝐎𝐍
𝙰𝚜 𝚙𝚎𝚛 𝚙𝚛𝚘𝚙𝚘𝚜𝚎𝚍 𝙽𝚂𝙲𝙿 𝟸𝟶𝟸𝟺 (𝟾𝚝𝚑 𝙴𝚍.)

Source of Table of Key differences between NSCP-7 and proposed NSCP-8 seismic provisions:
DOI: https://doi.org/10.1016/j.rineng.2026.109723
--------------
👷🏻‍♂️We offer 𝐒𝐎𝐋𝐔𝐓𝐈𝐎𝐍𝐒 to your engineering-related problems.
📩 PM for inquiries.
👍Like and follow the page for more.

22/02/2026

𝐒𝐓𝐑𝐔𝐂𝐓𝐔𝐑𝐀𝐋 𝐀𝐍𝐀𝐋𝐘𝐒𝐈𝐒
Project Title: 𝐂𝐎𝐍𝐒𝐓𝐑𝐔𝐂𝐓𝐈𝐎𝐍 𝐎𝐅 𝐒𝐖𝐈𝐌𝐌𝐈𝐍𝐆 𝐏𝐎𝐎𝐋
Structure Type: 𝐑𝐄𝐈𝐍𝐅𝐎𝐑𝐂𝐄𝐃 𝐂𝐎𝐍𝐂𝐑𝐄𝐓𝐄 𝐒𝐓𝐑𝐔𝐂𝐓𝐔𝐑𝐄
Project Location: NCR, Philippines
--------------
👷🏻‍♂️We offer 𝐒𝐎𝐋𝐔𝐓𝐈𝐎𝐍𝐒 to your engineering-related problems.
📩 PM for inquiries.
👍Like and follow the page for more.

15/02/2026

𝐒𝐓𝐑𝐔𝐂𝐓𝐔𝐑𝐀𝐋 𝐀𝐍𝐀𝐋𝐘𝐒𝐈𝐒 [𝐑𝐄𝐏𝐎𝐒𝐓]
Structure Type: 𝐒𝐓𝐄𝐄𝐋 𝐒𝐓𝐑𝐔𝐂𝐓𝐔𝐑𝐄 𝐖𝐈𝐓𝐇 𝐑𝐂 𝐒𝐔𝐁𝐒𝐓𝐑𝐔𝐂𝐓𝐔𝐑𝐄
Project Title: 𝐂𝐎𝐍𝐒𝐓𝐑𝐔𝐂𝐓𝐈𝐎𝐍 𝐎𝐅 𝐌𝐔𝐋𝐓𝐈-𝐏𝐔𝐑𝐏𝐎𝐒𝐄 𝐒𝐓𝐑𝐔𝐂𝐓𝐔𝐑𝐄
Project Location: 𝐓𝐞𝐱𝐚𝐬, 𝐔𝐒𝐀 🇺🇸
-----
𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐛𝐥𝐞 𝐂𝐨𝐝𝐞𝐬 𝐚𝐧𝐝 𝐒𝐭𝐚𝐧𝐝𝐚𝐫𝐝𝐬:
✅ International Building Code (IBC)
✅ American Society of Civil Engineers (ASCE)
✅ American Concrete Institute (ACI)
✅ American Institute of Steel Construction (AISC)
✅ American Society for Testing and Materials (ASTM)
✅ American Welding Society (AWS)
-----
👷🏻‍♂️We offer 𝐒𝐎𝐋𝐔𝐓𝐈𝐎𝐍𝐒 to your engineering-related problems.
📩 PM for inquiries.
👍Like and follow the page for more.

14/02/2026

𝓗𝓐𝓟𝓟𝓨 𝓥𝓪𝓵𝓮𝓷𝓽𝓲𝓷𝓮'𝓼 𝓓𝓪𝔂! ❤️

08/02/2026

coco melon ng engineers

07/02/2026

𝐃𝐈𝐃 𝐘𝐎𝐔 𝐊𝐍𝐎𝐖?

Did you know that rebar splicing in columns should ideally be done where tensile stress is at its lowest? Based on structural analysis for buildings in seismic zones, splices should be located within the middle half of the column's unbraced length.

𝘞𝘩𝘢𝘵 𝘥𝘰𝘦𝘴 𝘵𝘩𝘦 𝘤𝘰𝘥𝘦 𝘴𝘢𝘺?

✅ 𝐋𝐨𝐜𝐚𝐭𝐢𝐨𝐧: The structural code permits splicing only within the 𝙢𝙞𝙙𝙙𝙡𝙚 𝙝𝙖𝙡𝙛 𝙤𝙛 𝙩𝙝𝙚 𝙘𝙤𝙡𝙪𝙢𝙣 𝙨𝙥𝙖𝙣.
✅ 𝐓𝐫𝐚𝐧𝐬𝐯𝐞𝐫𝐬𝐞 𝐑𝐞𝐢𝐧𝐟𝐨𝐫𝐜𝐞𝐦𝐞𝐧𝐭: Close-spaced ties (anilyo) are required at the splice zone. The spacing for these ties is specifically calculated based on the code's requirements for that section.
✅ 𝐒𝐭𝐚𝐠𝐠𝐞𝐫𝐢𝐧𝐠: If using Class A splices, you cannot splice all bars at the same level. This prevents exceeding the allowable steel ratio and avoids making the structure brittle.

These requirements are crucial, especially if the structure is designed as a Special Momemnt Resisting Frame (SMRF).
------
👷🏻‍♂️We offer 𝐒𝐎𝐋𝐔𝐓𝐈𝐎𝐍𝐒 to your engineering-related problems.
📩 PM for inquiries.
👍Like and follow the page for more.

29/01/2026

𝐒𝐓𝐑𝐔𝐂𝐓𝐔𝐑𝐀𝐋 𝐀𝐍𝐀𝐋𝐘𝐒𝐈𝐒
Structure Type: 𝐑𝐄𝐈𝐍𝐅𝐎𝐑𝐂𝐄𝐃 𝐂𝐎𝐍𝐂𝐑𝐄𝐓𝐄 𝐒𝐓𝐑𝐔𝐂𝐓𝐔𝐑𝐄
Project Title: 𝐂𝐎𝐍𝐒𝐓𝐑𝐔𝐂𝐓𝐈𝐎𝐍 𝐎𝐅 𝐅𝐈𝐕𝐄 𝐒𝐓𝐎𝐑𝐄𝐘 𝐁𝐔𝐈𝐋𝐃𝐈𝐍𝐆
Project Location: Philippines
--------------
👷🏻‍♂️We offer 𝐒𝐎𝐋𝐔𝐓𝐈𝐎𝐍𝐒 to your engineering-related problems.
📩 PM for inquiries.
👍Like and follow the page for more.

11/01/2026

𝐒𝐓𝐑𝐔𝐂𝐓𝐔𝐑𝐀𝐋 𝐀𝐍𝐀𝐋𝐘𝐒𝐈𝐒
Structure Type: 𝐒𝐓𝐄𝐄𝐋 𝐒𝐓𝐑𝐔𝐂𝐓𝐔𝐑𝐄 𝐖𝐈𝐓𝐇 𝐑𝐂 𝐒𝐔𝐁𝐒𝐓𝐑𝐔𝐂𝐓𝐔𝐑𝐄
Project Title: 𝐂𝐎𝐍𝐒𝐓𝐑𝐔𝐂𝐓𝐈𝐎𝐍 𝐎𝐅 𝐌𝐔𝐋𝐓𝐈-𝐏𝐔𝐑𝐏𝐎𝐒𝐄 𝐒𝐓𝐑𝐔𝐂𝐓𝐔𝐑𝐄
Project Location: 𝐓𝐞𝐱𝐚𝐬, 𝐔𝐒𝐀 🇺🇸 🇺🇸 🇺🇸
-----

𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐛𝐥𝐞 𝐂𝐨𝐝𝐞𝐬 𝐚𝐧𝐝 𝐒𝐭𝐚𝐧𝐝𝐚𝐫𝐝𝐬:
✅ International Building Code (IBC)
✅ American Society of Civil Engineers (ASCE)
✅ American Concrete Institute (ACI)
✅ American Institute of Steel Construction (AISC)
✅ American Society for Testing and Materials (ASTM)
✅ American Welding Society (AWS)

-----
👷🏻‍♂️We offer 𝐒𝐎𝐋𝐔𝐓𝐈𝐎𝐍𝐒 to your engineering-related problems.
📩 PM for inquiries.
👍Like and follow the page for more.

25/12/2025

𝑀𝑒𝓇𝓇𝓎 𝘾𝙃𝙍𝙄𝙎𝙏𝙢𝙖𝙨! 🎄🥳🎉

22/11/2025

𝗦𝗧𝗥𝗨𝗖𝗧𝗨𝗥𝗔𝗟 𝗘𝗡𝗚𝗜𝗡𝗘𝗘𝗥𝗜𝗡𝗚 𝟭𝟬𝟭 🏗️👷🏻‍♂️
Topic: 𝘔𝘈𝘚𝘚 𝘗𝘈𝘙𝘛𝘐𝘊𝘐𝘗𝘈𝘛𝘐𝘖𝘕 𝘍𝘈𝘊𝘛𝘖𝘙

✅ The Mass Participation Factor (MPF) tells you how much of a structure's total mass is actually moving (participating) when it vibrates in a specific way, which is called a mode shape.

✅ When a structure, like a building, vibrates, it doesn't just move as one rigid block; it vibrates in different patterns, which are the mode shapes. Each mode shape has its own frequency.

✅ The MPF tells you, for a particular mode shape, what percentage of the structure's total mass is involved in that specific motion. For instance, a high MPF for the first mode means that mode shape is responsible for most of the overall shaking. Engineers use the MPF to determine which modes are the most important to consider when analyzing a structure's response to dynamic forces, like an earthquake, because the modes with the highest MPFs contribute the most to the total forces and displacements.

-------
👷🏻‍♂️We offer engineering services and 𝐒𝐎𝐋𝐔𝐓𝐈𝐎𝐍𝐒.
📩 PM for inquiries. Like and follow the page for more.

07/11/2025

𝐇𝐚𝐩𝐩𝐲 𝐍𝐚𝐭𝐢𝐨𝐧𝐚𝐥 𝐂𝐢𝐯𝐢𝐥 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠 𝐌𝐨𝐧𝐭𝐡 𝟐𝟎𝟐𝟓 👷👷‍♀️

As we observe 𝐍𝐚𝐭𝐢𝐨𝐧𝐚𝐥 𝐂𝐢𝐯𝐢𝐥 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠 𝐌𝐨𝐧𝐭𝐡, let's remember that the 𝐢𝐧𝐭𝐞𝐠𝐫𝐢𝐭𝐲 of our profession is fundamental, especially now when society's safety depends on it—from reliable flood control and resilient earthquake-resistant structures to infrastructure capable of withstanding typhoons. Civil engineers are the unsung builders and protectors, whose dedication ensures the public's well-being and the progress of the Philippines.

02/11/2025

Happy Halloween! 🎃👻

Address

Gomez Street
Calbayog
6710

Website

facebook.com

Alerts

Be the first to know and let us send you an email when DZT Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to DZT Engineering:

Shortcuts

Want your business to be the top-listed Engineering Company in Calbayog?