What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5pm Saturday 9am - 5pm

https://www.facebook.com/159982890756882/

Alfra Steel Ind. Inc.

Name: Alfra Steel Ind. Inc.
Address: Gov. Pascual Avenue, Malabon, 1470, PH
Telephone: +63282888652

Home
Philippines
Malabon
Alfra Steel Ind. Inc.

Welcome to Alfra Steel Industrial Incorporated Official page, your one-stop-shop for your electrical conduit needs.

We are the exclusive manufacturer of Nichi IMC/EMT and Magnus Brand Conduit Pipes. Philippine's #1 manufacturer of steel conduit pipes.

We're Hiring ❗️Job Position: Sales RepresentativeSend your CV to alfra.i.atentar@gmail.com/09088951299Address: 187 Gover...

17/07/2026

We're Hiring ❗️
Job Position: Sales Representative

Send your CV to [email protected]/09088951299
Address: 187 Governor Pascual St., Acacia, Malabon City

10/07/2026

EMT ONE HOLE STRAP

An EMT 1-hole strap is a mounting accessory used to fasten Electrical Metallic Tubing (EMT) securely to walls, ceilings, and other surfaces. Designed with a single mounting hole, it allows for quick and convenient installation.

09/07/2026

EMT COMPRESSION CONNECTOR

An EMT compression-type connector is a fitting designed to attach Electrical Metallic Tubing (EMT) to electrical boxes, panels, or enclosures. It uses a compression ring to firmly secure the conduit, ensuring a strong and dependable connection.

29/06/2026

EMT COMPRESSION COUPLING

An EMT compression-type coupling is a fitting used to connect two sections of Electrical Metallic Tubing (EMT) in a straight run. It utilizes compression rings to firmly secure the conduit ends, creating a strong and dependable connection.

22/06/2026

EMT COUPLING

An EMT screw-type coupling is a connector designed to join two sections of Electrical Metallic Tubing (EMT) in a straigth pathway.
It features set screws that securely tighten onto the conduit, providing a strong and dependable connnection.

20/06/2026

EMT CONNECTOR

An EMT screw-type connector is a fitting designed to connect Electrical Metallic Tubing (EMT) to electrical boxes, panels, or enclosures. It features set screws that securely fasten the conduit, ensuring a strong and dependable connection. Widely used in indoor electrical installations, it offers a practical, reliable, and economical solution for terminating EMT conduit systems.

02/05/2026

SQUEEZE STRAIGHT CONNECTOR
A squeeze straight connector is a fitting used to connect flexible metal conduit to an electrical box or enclosure. It works by squeezing or clamping onto the conduit when the screws are tightened, creating a secure connection. Squeeze straight connectors are commonly used in electrical installations to attach flexible conduit to boxes, panels, lighting fixtures, or equipment, especially in areas where flexibility and vibration resistance are needed.

📌How It’s Used:
1. Insert the EMT conduit into the connector
2. Tighten the squeeze screws to secure the conduit
3. Thread or lock the connector into the electrical box
4. Check all fasteners for a solid, vibration-free connection

The Squeeze Straight Connector delivers dependable performance with fast installation and a polished finish. A must-have fitting for electricians who value efficiency, safety, and professional-grade results on every job.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

29/04/2026

SERVICE ENTRANCE CAP (CLAMP TYPE)
A service entrance cap (clamp type) is a fitting installed at the top of a service entrance conduit where electrical service wires enter a building. It uses a clamp to securely hold the incoming cables while protecting them from sharp edges, weather, and movement. This cap is commonly used in overhead electrical service installations to support and protect service conductors, help maintain proper drip loops, and ensure a safe and secure entry point into the building.

📌How to Use a Clamp-Type Service Entrance Cap:
1. Make sure the conduit end is clean and properly installed.
2. Pull the service entrance conductors through the conduit.
3. Slide the clamp-type service entrance cap over the conduit end.
4. Tighten the clamp screws evenly to secure the cap firmly in place.
5. Feed the conductors through the cap openings or rubber grommet and position the cap to shed water away.

Using a clamp-type service entrance cap helps maintain a safe, code-compliant installation while extending the life of the electrical system. Easy to install and built for durability, it’s a reliable choice for electricians and contractors who need dependable, weather-resistant protection at the service entrance.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

15/04/2026

SERVICE ENTRANCE CAP (THREADED TYPE)
A service entrance cap (threaded type) is a metal fitting that screws onto the threaded end of a service entrance conduit where electrical service wires enter a building. It protects the wires from damage caused by sharp conduit edges and helps shield the entry point from weather. This type of service entrance cap is commonly used in overhead electrical service installations to provide a secure, durable, and weather-resistant connection for incoming power lines.

📌How to Use a Threaded Service Entrance Cap:
1. Ensure the threaded conduit is properly installed and securely mounted.
2. Pull the service entrance conductors through the conduit.
3. Thread the service entrance cap tightly onto the conduit end.
4. Feed the conductors through the cap openings or rubber grommet.
5. Make sure the cap is positioned correctly to shed water away from the conduit.

Using a threaded service entrance cap helps extend the life of electrical systems by preventing moisture entry, reducing corrosion, and maintaining code-compliant installations. Built from durable materials and designed for dependable performance, it’s a trusted choice for electricians and contractors who need safe, weather-resistant, and professional service entrance solutions.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

13/04/2026

ANGLE CONNECTOR
An angle connector is a metal fitting used to join two structural components at a right angle, usually 90 degrees. It is commonly used with framing systems like Unistrut to create corners, braces, or supports. Angle connectors help provide strength and stability to frames and structures and are widely used in electrical, mechanical, HVAC, and construction applications to support equipment, piping, and conduit.

📌How It’s Used:
1. Insert the conduit into the connector
2. Tighten the clamp or screws to secure the conduit
3. Thread the connector into the electrical box or enclosure
4. Ensure all fittings are tightened for a stable, safe setup

When space is limited but performance matters, the Angle Connector delivers a clean, professional finish you can trust. A reliable choice for electricians and installers who value strength, safety, and precision in every connection.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

Address

Gov. Pascual Avenue
Malabon
1470

Opening Hours

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5pm
Saturday	9am - 5pm

Telephone

+63282888652

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Alfra Steel Ind. Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Alfra Steel Ind. Inc.:

Want your business to be the top-listed Engineering Company in Malabon?